When reading GEN11_GT_INTR_DWx closely after enabling the interrupts in gen11_irq_postinstall, the returned value is garbage. This can cause other parts of the setup code (e.g. gen11_reset_one_iir) to think that there are interrupts to be cleared when there are none. The garbage value is only seen on the first read done after the enable, so this looks like a posting issue. Adding a posting read after enabling the interrupts does indeed fix the problem. Note that the posting read has been purposely added outside of gen11_master_intr_enable since the issue has only been observed when the full interrupt setup is performed. Cc: Mika Kuoppala <mika.kuoppala@xxxxxxxxxxxxxxx> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@xxxxxxxxx> --- drivers/gpu/drm/i915/i915_irq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 5fd5080c4ccb..7056ae2d1e0e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -4089,6 +4089,7 @@ static int gen11_irq_postinstall(struct drm_device *dev) I915_WRITE(GEN11_DISPLAY_INT_CTL, GEN11_DISPLAY_IRQ_ENABLE); gen11_master_intr_enable(dev_priv->regs); + POSTING_READ(GEN11_GFX_MSTR_IRQ); return 0; } -- 2.20.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
