Re: [PATCH 2/5] drm/i915: Refactor PSR status debugfs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2019-01-02 at 09:09 -0800, Souza, Jose wrote:
> On Tue, 2018-12-11 at 18:54 +0000, Souza, Jose wrote:
> > On Tue, 2018-12-11 at 10:32 -0800, Dhinakaran Pandiyan wrote:
> > > On Tue, 2018-12-11 at 04:44 -0800, Souza, Jose wrote:
> > > > On Mon, 2018-12-10 at 22:51 -0800, Dhinakaran Pandiyan wrote:
> > > > > On Tue, 2018-12-04 at 15:00 -0800, José Roberto de Souza
> > > > > wrote:
> > > > > > The old debugfs fields was not following a naming partern
> > > > > > and
> > > > > > it
> > > > > > was
> > > > > > a bit confusing.
> > > > > > 
> > > > > > So it went from:
> > > > > > ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
> > > > > > Sink_Support: yes
> > > > > > PSR mode: PSR1
> > > > > > Enabled: yes
> > > > > > Busy frontbuffer bits: 0x000
> > > > > > Main link in standby mode: no
> > > > > > HW Enabled & Active bit: yes
> > > > > > Source PSR status: 0x24050006 [SRDONACK]
> > > > > > 
> > > > > > To:
> > > > > > ~$ sudo more /sys/kernel/debug/dri/0/i915_edp_psr_status
> > > > > > Sink support: yes [0x00000003]
> > > > > > Status: PSR1 enabled
> > > > > > Source PSR ctl: enabled [0x81f00e26]
> > > > > > Source PSR status: SRDENT [0x40040006]
> > > > > > Busy frontbuffer bits: 0x00000000
> > > > > > 
> > > > > > The 'Main link in standby mode' was removed as it is not
> > > > > > useful
> > > > > > but
> > > > > > if needed by someone the information is still in the
> > > > > > register
> > > > > > value
> > > > > > of 'Source PSR ctl' inside of the brackets, PSR mode and
> > > > > > Enabled
> > > > > > was
> > > > > > squashed into Status, some renames and reorders and we have
> > > > > > this
> > > > > > cleaner version. This will also make easy to parse debugfs
> > > > > > for
> > > > > > IGT
> > > > > > tests.
> > > > > > 
> > > > > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > > > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > > > > > Suggested-by: Dhinakaran Pandiyan <
> > > > > > dhinakaran.pandiyan@xxxxxxxxx>
> > > > > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > > > > > ---
> > > > > >  drivers/gpu/drm/i915/i915_debugfs.c | 96 +++++++++++++++--
> > > > > > ----
> > > > > > ----
> > > > > > ----
> > > > > >  1 file changed, 49 insertions(+), 47 deletions(-)
> > > > > > 
> > > > > > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> > > > > > b/drivers/gpu/drm/i915/i915_debugfs.c
> > > > > > index 38dcee1ca062..86303ba02666 100644
> > > > > > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > > > > > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > > > > > @@ -2665,7 +2665,8 @@
> > > > > > DEFINE_SHOW_ATTRIBUTE(i915_psr_sink_status);
> > > > > >  static void
> > > > > >  psr_source_status(struct drm_i915_private *dev_priv,
> > > > > > struct
> > > > > > seq_file
> > > > > > *m)
> > > > > >  {
> > > > > > -	u32 val, psr_status;
> > > > > > +	u32 val, status_val;
> > > > > > +	const char *status = "unknown";
> > > > > >  
> > > > > >  	if (dev_priv->psr.psr2_enabled) {
> > > > > >  		static const char * const live_status[] = {
> > > > > > @@ -2681,14 +2682,11 @@ psr_source_status(struct
> > > > > > drm_i915_private
> > > > > > *dev_priv, struct seq_file *m)
> > > > > >  			"BUF_ON",
> > > > > >  			"TG_ON"
> > > > > >  		};
> > > > > > -		psr_status = I915_READ(EDP_PSR2_STATUS);
> > > > > > -		val = (psr_status & EDP_PSR2_STATUS_STATE_MASK)
> > > > > > -			EDP_PSR2_STATUS_STATE_SHIFT;
> > > > > > -		if (val < ARRAY_SIZE(live_status)) {
> > > > > > -			seq_printf(m, "Source PSR status: 0x%x
> > > > > > [%s]\n",
> > > > > > -				   psr_status,
> > > > > > live_status[val]);
> > > > > > -			return;
> > > > > > -		}
> > > > > > +		val = I915_READ(EDP_PSR2_STATUS);
> > > > > > +		status_val = (val & EDP_PSR2_STATUS_STATE_MASK)
> > > > > > +			      EDP_PSR2_STATUS_STATE_SHIFT;
> > > > > > +		if (status_val < ARRAY_SIZE(live_status))
> > > > > > +			status = live_status[status_val];
> > > > > >  	} else {
> > > > > >  		static const char * const live_status[] = {
> > > > > >  			"IDLE",
> > > > > > @@ -2700,74 +2698,78 @@ psr_source_status(struct
> > > > > > drm_i915_private
> > > > > > *dev_priv, struct seq_file *m)
> > > > > >  			"SRDOFFACK",
> > > > > >  			"SRDENT_ON",
> > > > > >  		};
> > > > > > -		psr_status = I915_READ(EDP_PSR_STATUS);
> > > > > > -		val = (psr_status & EDP_PSR_STATUS_STATE_MASK)
> > > > > > -			EDP_PSR_STATUS_STATE_SHIFT;
> > > > > > -		if (val < ARRAY_SIZE(live_status)) {
> > > > > > -			seq_printf(m, "Source PSR status: 0x%x
> > > > > > [%s]\n",
> > > > > > -				   psr_status,
> > > > > > live_status[val]);
> > > > > > -			return;
> > > > > > -		}
> > > > > > +		val = I915_READ(EDP_PSR_STATUS);
> > > > > > +		status_val = (val & EDP_PSR_STATUS_STATE_MASK)
> > > > > > +			      EDP_PSR_STATUS_STATE_SHIFT;
> > > > > > +		if (status_val < ARRAY_SIZE(live_status))
> > > > > > +			status = live_status[status_val];
> > > > > >  	}
> > > > > >  
> > > > > > -	seq_printf(m, "Source PSR status: 0x%x [%s]\n",
> > > > > > psr_status,
> > > > > > "unknown");
> > > > > > +	seq_printf(m, "Source PSR status: %s [0x%08x]\n",
> > > > > > status, val);
> > > > > >  }
> > > > > >  
> > > > > >  static int i915_edp_psr_status(struct seq_file *m, void
> > > > > > *data)
> > > > > >  {
> > > > > >  	struct drm_i915_private *dev_priv = node_to_i915(m-
> > > > > > > private);
> > > > > > 
> > > > > > -	u32 psrperf = 0;
> > > > > > -	bool enabled = false;
> > > > > > -	bool sink_support;
> > > > > > +	struct i915_psr *psr = &dev_priv->psr;
> > > > > > +	const char *status;
> > > > > > +	bool enabled;
> > > > > > +	u32 val;
> > > > > >  
> > > > > >  	if (!HAS_PSR(dev_priv))
> > > > > >  		return -ENODEV;
> > > > > >  
> > > > > > -	sink_support = dev_priv->psr.sink_support;
> > > > > > -	seq_printf(m, "Sink_Support: %s\n",
> > > > > > yesno(sink_support));
> > > > > > -	if (!sink_support)
> > > > > > +	seq_printf(m, "Sink support: %s", yesno(psr-
> > > > > > > sink_support));
> > > > > > 
> > > > > > +	if (!psr->sink_support) {
> > > > > > +		seq_puts(m, "\n");
> > > > > >  		return 0;
> > > > > > +	}
> > > > > >  
> > > > > >  	intel_runtime_pm_get(dev_priv);
> > > > > > +	mutex_lock(&psr->lock);
> > > > > >  
> > > > > > -	mutex_lock(&dev_priv->psr.lock);
> > > > > > -	seq_printf(m, "PSR mode: %s\n",
> > > > > > -		   dev_priv->psr.psr2_enabled ? "PSR2" :
> > > > > > "PSR1");
> > > > > > -	seq_printf(m, "Enabled: %s\n", yesno(dev_priv-
> > > > > > > psr.enabled));
> > > > > > 
> > > > > > -	seq_printf(m, "Busy frontbuffer bits: 0x%03x\n",
> > > > > > -		   dev_priv->psr.busy_frontbuffer_bits);
> > > > > > +	seq_printf(m, " [0x%08x]\n", psr->dp->psr_dpcd[0]);
> > > > > 
> > > > > This can be moved closer to where "Sink support" is printed.
> > > > > Also,  the
> > > > > extra zeroes that get printed due to "%08x" look odd, please
> > > > > consider
> > > > > changing it to "%02x".
> > > > 
> > > > Done
> > > > 
> > > > > >  
> > > > > > -	if (dev_priv->psr.psr2_enabled)
> > > > > > -		enabled = I915_READ(EDP_PSR2_CTL) &
> > > > > > EDP_PSR2_ENABLE;
> > > > > > +	if (psr->enabled)
> > > > > > +		status = psr->psr2_enabled ? "PSR2 enabled" :
> > > > > > "PSR1
> > > > > > enabled";
> > > > > >  	else
> > > > > > -		enabled = I915_READ(EDP_PSR_CTL) &
> > > > > > EDP_PSR_ENABLE;
> > > > > > +		status = "disabled";
> > > > > > +	seq_printf(m, "Status: %s\n", status);
> > > > > 
> > > > > Can we just use the ctl field and get rid of this? This
> > > > > status
> > > > > and
> > > > > and
> > > > > the one below can be confusing to those not familiar with the
> > > > > code
> > > > > base.
> > > > > 
> > > > > We should be able to parse all the information we need from
> > > > > two
> > > > > lines
> > > > > Source PSR ctl:		[PSR1,PSR2] enabled <reg value>
> > > > > Source PSR status:	<state> <reg value>
> > > > 
> > > > I'm fine in having just one but when there is frontbuffer
> > > > modifications
> > > > Status is kept as enabled and Source PSR ctl and Source PSR
> > > > status
> > > > are
> > > > set to idle states, 
> > > 
> > > That is a good point -  psr_invalidate() would disable the
> > > feature
> > > in 
> > > hardware but the driver state is enabled. I guess, you could
> > > change
> > > "Status" to "PSR mode"/"Feature state". 
> > > ...
> > > PSR mode:		{PSR1 enabled, PSR2 enabled, disabled}
> > > Source PSR ctl:		{enabled, disabled} ...
> > > Source PSR status:	...
> > > ...
> > > 
> > > Is this better?
> > > 
> > 
> > Yeah looks good to me.
> > 
> > > Also, it might be worth printing the "PSR mode:" line even when
> > > there
> > > is no sink_support. It's an useful piece of debug information and
> > > doesn't access the hardware.
> 
> About this one, to read psr->enable and psr->psr2_enabled we take PSR
> mutex and it is only initialized if sink support PSR.
> If that information is useful when doing IGT changes I will send it
> in
> a separate patch, sounds good?

Yeah, that's fine.

-DK

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux