Registering an output for a non-existent port (on a given SKU) can lead to problems when trying to use the port, for instance timeouts during power well enabling. Since there are no strap bits for port detection we have to rely on VBT for this, so do that here. There are no known SKUs where any of the A-E ports are non-existent, so to reduce the likelihood of breakage due to incorrect VBT information, do this detection only for port F (which is known to be missing on some ICL SKUs). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108915 Cc: Mika Kahola <mika.kahola@xxxxxxxxx> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> --- drivers/gpu/drm/i915/intel_display.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index a2f8aaf61c61..2b81da068010 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14273,7 +14273,13 @@ static void intel_setup_outputs(struct drm_i915_private *dev_priv) intel_ddi_init(dev_priv, PORT_C); intel_ddi_init(dev_priv, PORT_D); intel_ddi_init(dev_priv, PORT_E); - intel_ddi_init(dev_priv, PORT_F); + /* + * On some ICL SKUs port F is not present. No strap bits for + * this, so rely on VBT. + */ + if (intel_bios_is_port_present(dev_priv, PORT_F)) + intel_ddi_init(dev_priv, PORT_F); + icl_dsi_init(dev_priv); } else if (IS_GEN9_LP(dev_priv)) { /* -- 2.13.2 _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
