On Thu, Dec 13, 2018 at 09:31:04AM +0530, Ramalingam C wrote:
> Header defines the interface for the I915 and MEI_HDCP drivers.
>
> Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
Yeah I think everything together is much neater, and I didn't have any
material concerns with the interface from v8.
> ---
> include/drm/i915_mei_hdcp_interface.h | 132 ++++++++++++++++++++++++++++++++++
> 1 file changed, 132 insertions(+)
> create mode 100644 include/drm/i915_mei_hdcp_interface.h
>
> diff --git a/include/drm/i915_mei_hdcp_interface.h b/include/drm/i915_mei_hdcp_interface.h
> new file mode 100644
> index 000000000000..e3b7fb32612a
> --- /dev/null
> +++ b/include/drm/i915_mei_hdcp_interface.h
> @@ -0,0 +1,132 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
> +/*
> + * Copyright © 2017-2018 Intel Corporation
> + *
> + * Authors:
> + * Ramalingam C <ramalingam.c@xxxxxxxxx>
To address Tomas questions, maybe add a comment here that this is the
mei_hdcp specific interface specific to mei and gen9+ intel display IP,
and doesn't implment the entirety of hdcp2, hence why it's specific and
not generic. Plus maybe mention that all the generic/standardized bits are
in drm/drm_hdcp.h.
Either way Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
> + */
> +
> +#ifndef _I915_MEI_HDCP_INTERFACE_H_
> +#define _I915_MEI_HDCP_INTERFACE_H_
> +
> +#include <linux/mutex.h>
> +#include <drm/drm_hdcp.h>
> +
> +/**
> + * enum hdcp_port_type - HDCP port implementation type defined by ME FW
> + * @HDCP_PORT_TYPE_INVALID: Invalid hdcp port type
> + * @HDCP_PORT_TYPE_INTEGRATED: In-Host HDCP2.x port
> + * @HDCP_PORT_TYPE_LSPCON: HDCP2.2 discrete wired Tx port with LSPCON
> + * (HDMI 2.0) solution
> + * @HDCP_PORT_TYPE_CPDP: HDCP2.2 discrete wired Tx port using the CPDP (DP 1.3)
> + * solution
> + */
> +enum hdcp_port_type {
> + HDCP_PORT_TYPE_INVALID,
> + HDCP_PORT_TYPE_INTEGRATED,
> + HDCP_PORT_TYPE_LSPCON,
> + HDCP_PORT_TYPE_CPDP
> +};
> +
> +/**
> + * enum hdcp_wired_protocol - HDCP adaptation used on the port
> + * @HDCP_PROTOCOL_INVALID: Invalid HDCP adaptation protocol
> + * @HDCP_PROTOCOL_HDMI: HDMI adaptation of HDCP used on the port
> + * @HDCP_PROTOCOL_DP: DP adaptation of HDCP used on the port
> + */
> +enum hdcp_wired_protocol {
> + HDCP_PROTOCOL_INVALID,
> + HDCP_PROTOCOL_HDMI,
> + HDCP_PROTOCOL_DP
> +};
> +
> +/**
> + * struct hdcp_port_data - intel specific HDCP port data
> + * @port: port index as per I915
> + * @port_type: HDCP port type as per ME FW classification
> + * @protocol: HDCP adaptation as per ME FW
> + * @k: No of streams transmitted on a port. Only on DP MST this is != 1
> + * @seq_num_m: Count of RepeaterAuth_Stream_Manage msg propagated.
> + * Initialized to 0 on AKE_INIT. Incremented after every successful
> + * transmission of RepeaterAuth_Stream_Manage message. When it rolls
> + * over re-Auth has to be triggered.
> + * @streams: struct hdcp2_streamid_type[k]. Defines the type and id for the
> + * streams
> + */
> +struct hdcp_port_data {
> + short int port;
> + u8 port_type;
> + u8 protocol;
> + u16 k;
> + u32 seq_num_m;
> + struct hdcp2_streamid_type *streams;
> +};
> +
> +/**
> + * struct i915_hdcp_component_ops- ops for HDCP2.2 services.
> + * @owner: Module providing the ops
> + * @initiate_hdcp2_session: Initiate a Wired HDCP2.2 Tx Session.
> + * And Prepare AKE_Init.
> + * @verify_receiver_cert_prepare_km: Verify the Receiver Certificate
> + * AKE_Send_Cert and prepare
> + AKE_Stored_Km/AKE_No_Stored_Km
> + * @verify_hprime: Verify AKE_Send_H_prime
> + * @store_pairing_info: Store pairing info received
> + * @initiate_locality_check: Prepare LC_Init
> + * @verify_lprime: Verify lprime
> + * @get_session_key: Prepare SKE_Send_Eks
> + * @repeater_check_flow_prepare_ack: Validate the Downstream topology
> + * and prepare rep_ack
> + * @verify_mprime: Verify mprime
> + * @enable_hdcp_authentication: Mark a port as authenticated.
> + * @close_hdcp_session: Close the Wired HDCP Tx session per port.
> + * This also disables the authenticated state of the port.
> + */
> +struct i915_hdcp_component_ops {
> + /**
> + * @owner: mei_hdcp module
> + */
> + struct module *owner;
> +
> + int (*initiate_hdcp2_session)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_ake_init *ake_data);
> + int (*verify_receiver_cert_prepare_km)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_ake_send_cert
> + *rx_cert,
> + bool *km_stored,
> + struct hdcp2_ake_no_stored_km
> + *ek_pub_km,
> + size_t *msg_sz);
> + int (*verify_hprime)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_ake_send_hprime *rx_hprime);
> + int (*store_pairing_info)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_ake_send_pairing_info
> + *pairing_info);
> + int (*initiate_locality_check)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_lc_init *lc_init_data);
> + int (*verify_lprime)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_lc_send_lprime *rx_lprime);
> + int (*get_session_key)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_ske_send_eks *ske_data);
> + int (*repeater_check_flow_prepare_ack)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_rep_send_receiverid_list
> + *rep_topology,
> + struct hdcp2_rep_send_ack
> + *rep_send_ack);
> + int (*verify_mprime)(struct device *dev,
> + struct hdcp_port_data *data,
> + struct hdcp2_rep_stream_ready *stream_ready);
> + int (*enable_hdcp_authentication)(struct device *dev,
> + struct hdcp_port_data *data);
> + int (*close_hdcp_session)(struct device *dev,
> + struct hdcp_port_data *data);
> +};
> +#endif /* _I915_MEI_HDCP_NTERFACE_H_ */
> --
> 2.7.4
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
