On Tue, Dec 11, 2018 at 11:40:43AM +0200, Imre Deak wrote:
> On Wed, Dec 05, 2018 at 06:32:22PM +0200, Imre Deak wrote:
> > On Tue, Dec 04, 2018 at 03:41:09PM -0800, clinton.a.taylor@xxxxxxxxx wrote:
> > > From: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
> > >
> > > In August 2018 the BSPEC changed the ICL port programming sequence to
> > > closely resemble earlier gen programming sequence.
> > >
> > > v2: remove debug code that Imre found
> > > v3: simplify translation table if-else
> > >
> > > BSpec: 21257
> > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Cc: Imre Deak <imre.deak@xxxxxxxxx>
> > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/i915_reg.h | 4 +
> > > drivers/gpu/drm/i915/intel_ddi.c | 224 ++++++++++++++-------------------------
> > > 2 files changed, 85 insertions(+), 143 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > index 0a7d605..29acdb9 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -1866,6 +1866,10 @@ enum i915_power_well_id {
> > >
> > > #define CNL_PORT_TX_DW7_GRP(port) _MMIO(_CNL_PORT_TX_DW_GRP((port), 7))
> > > #define CNL_PORT_TX_DW7_LN0(port) _MMIO(_CNL_PORT_TX_DW_LN0((port), 7))
> > > +#define ICL_PORT_TX_DW7_AUX(port) _MMIO(_ICL_PORT_TX_DW_AUX(7, port))
> > > +#define ICL_PORT_TX_DW7_GRP(port) _MMIO(_ICL_PORT_TX_DW_GRP(7, port))
> > > +#define ICL_PORT_TX_DW7_LN0(port) _MMIO(_ICL_PORT_TX_DW_LN(7, 0, port))
> > > +#define ICL_PORT_TX_DW7_LN(port, ln) _MMIO(_ICL_PORT_TX_DW_LN(7, ln, port))
> >
> > Looks like _CNL_PORT_TX_DW_GRP() is inconsistent with the ICL
> > counterpart and CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are broken atm,
> > they need to be fixed as a follow-up.
> >
> > > #define N_SCALAR(x) ((x) << 24)
> > > #define N_SCALAR_MASK (0x7F << 24)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > > index f3e1d6a..d78ec17 100644
> > > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > > @@ -494,103 +494,63 @@ struct cnl_ddi_buf_trans {
> > > { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
> > > };
> > >
> > > -struct icl_combo_phy_ddi_buf_trans {
> > > - u32 dw2_swing_select;
> > > - u32 dw2_swing_scalar;
> > > - u32 dw4_scaling;
> > > -};
> > > -
> > > -/* Voltage Swing Programming for VccIO 0.85V for DP */
> > > -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
> > > - /* Voltage mV db */
> > > - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
> > > - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
> > > - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
> > > - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
> > > - { 0xB, 0x70, 0x0018 }, /* 600 0.0 */
> > > - { 0xB, 0x70, 0x3015 }, /* 600 3.5 */
> > > - { 0xB, 0x70, 0x6012 }, /* 600 6.0 */
> > > - { 0x5, 0x00, 0x0018 }, /* 800 0.0 */
> > > - { 0x5, 0x00, 0x3015 }, /* 800 3.5 */
> > > - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
> > > -};
> > > -
> > > -/* FIXME - After table is updated in Bspec */
> > > -/* Voltage Swing Programming for VccIO 0.85V for eDP */
> > > -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_85V[] = {
> > > - /* Voltage mV db */
> > > - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
> > > +/* icl_combo_phy_ddi_translations */
> > > +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_dp[] = {
> > > + /* NT mV Trans mV db */
> > > + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
> > > + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */
> > > + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */
> > > + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */
> > > + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
> > > + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */
> > > + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */
> > > + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 705 0.6 */
> > ----^ 700
> >
> > > + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */
> > > + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
> > > };
> > >
> > > -/* Voltage Swing Programming for VccIO 0.95V for DP */
> > > -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
> > > - /* Voltage mV db */
> > > - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
> > > - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
> > > - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
> > > - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
> > > - { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
> > > - { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
> > > - { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
> > > - { 0x5, 0x76, 0x0018 }, /* 800 0.0 */
> > > - { 0x5, 0x76, 0x3015 }, /* 800 3.5 */
> > > - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
> > > +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_lowswing[] = {
> > > + /* NT mV Trans mV db */
> > > + { 0x0, 0x7F, 0x3F, 0x00, 0x00 }, /* 200 200 0.0 */
> > > + { 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 200 250 1.9 */
> > > + { 0x1, 0x7F, 0x33, 0x00, 0x0C }, /* 200 300 3.5 */
> > > + { 0x9, 0x7F, 0x31, 0x00, 0x0E }, /* 200 350 4.9 */
> > > + { 0x8, 0x7F, 0x3F, 0x00, 0x00 }, /* 250 250 0.0 */
> > > + { 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 250 300 1.6 */
> > > + { 0x9, 0x7F, 0x35, 0x00, 0x0A }, /* 250 350 2.9 */
> > > + { 0x1, 0x7F, 0x3F, 0x00, 0x00 }, /* 300 300 0.0 */
> > > + { 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 300 350 1.3 */
> > > + { 0x9, 0x7F, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
> > > };
> > >
> > > -/* FIXME - After table is updated in Bspec */
> > > -/* Voltage Swing Programming for VccIO 0.95V for eDP */
> > > -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_95V[] = {
> > > - /* Voltage mV db */
> > > - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
> > > +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_edp_hbr3[] = {
> > > + /* NT mV Trans mV db */
> > > + { 0xA, 0x35, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
> > > + { 0xA, 0x4F, 0x37, 0x00, 0x08 }, /* 350 500 3.1 */
> > > + { 0xC, 0x71, 0x2F, 0x00, 0x10 }, /* 350 700 6.0 */
> > > + { 0x6, 0x7F, 0x2B, 0x00, 0x14 }, /* 350 900 8.2 */
> > > + { 0xA, 0x4C, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
> > > + { 0xC, 0x73, 0x34, 0x00, 0x0B }, /* 500 700 2.9 */
> > > + { 0x6, 0x7F, 0x2F, 0x00, 0x10 }, /* 500 900 5.1 */
> > > + { 0xC, 0x6C, 0x3C, 0x00, 0x03 }, /* 650 700 0.6 */
> > > + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 900 3.5 */
> > > + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
> > > };
> > >
> > > -/* Voltage Swing Programming for VccIO 1.05V for DP */
> > > -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
> > > - /* Voltage mV db */
> > > - { 0x2, 0x98, 0x0018 }, /* 400 0.0 */
> > > - { 0x2, 0x98, 0x3015 }, /* 400 3.5 */
> > > - { 0x2, 0x98, 0x6012 }, /* 400 6.0 */
> > > - { 0x2, 0x98, 0x900F }, /* 400 9.5 */
> > > - { 0x4, 0x98, 0x0018 }, /* 600 0.0 */
> > > - { 0x4, 0x98, 0x3015 }, /* 600 3.5 */
> > > - { 0x4, 0x98, 0x6012 }, /* 600 6.0 */
> > > - { 0x5, 0x71, 0x0018 }, /* 800 0.0 */
> > > - { 0x5, 0x71, 0x3015 }, /* 800 3.5 */
> > > - { 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
> > > +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_hdmi[] = {
> > > + /* NT mV Trans mV db */
> > > + { 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
> > > + { 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */
> > > + { 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */
> > > + { 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 ALS */
> > > + { 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */
> > > + { 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */
> > > + { 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
> > > };
> > >
> > > -/* FIXME - After table is updated in Bspec */
> > > -/* Voltage Swing Programming for VccIO 1.05V for eDP */
> > > -static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_1_05V[] = {
> > > - /* Voltage mV db */
> > > - { 0x0, 0x00, 0x00 }, /* 200 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 4.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 200 6.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 250 4.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 300 0.0 */
> > > - { 0x0, 0x00, 0x00 }, /* 300 1.5 */
> > > - { 0x0, 0x00, 0x00 }, /* 350 0.0 */
> > > +static const struct cnl_ddi_buf_trans icl_combo_phy_ddi_translations_mipi[] = {
> > > + /* NT mV Trans mV db */
> > > + { 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
> >
> > The DSI code has its own PHY programming atm, and this table here is
> > unused so no need adding it.
> >
> > Unrelated but looks like the DSI code doesn't program ICL_PORT_TX_DW7,
> > that should be fixed as a follow-up.
> >
> > > };
> > >
> > > struct icl_mg_phy_ddi_buf_trans {
> > > @@ -871,43 +831,24 @@ static int skl_buf_trans_num_entries(enum port port, int n_entries)
> > > }
> > > }
> > >
> > > -static const struct icl_combo_phy_ddi_buf_trans *
> > > +static const struct cnl_ddi_buf_trans *
> > > icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port,
> > > int type, int *n_entries)
> > > {
> > > - u32 voltage = I915_READ(ICL_PORT_COMP_DW3(port)) & VOLTAGE_INFO_MASK;
> > > -
> > > - if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
> > > - switch (voltage) {
> > > - case VOLTAGE_INFO_0_85V:
> > > - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_85V);
> > > - return icl_combo_phy_ddi_translations_edp_0_85V;
> > > - case VOLTAGE_INFO_0_95V:
> > > - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_95V);
> > > - return icl_combo_phy_ddi_translations_edp_0_95V;
> > > - case VOLTAGE_INFO_1_05V:
> > > - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_1_05V);
> > > - return icl_combo_phy_ddi_translations_edp_1_05V;
> > > - default:
> > > - MISSING_CASE(voltage);
> > > - return NULL;
> > > - }
> > > - } else {
> > > - switch (voltage) {
> > > - case VOLTAGE_INFO_0_85V:
> > > - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_85V);
> > > - return icl_combo_phy_ddi_translations_dp_hdmi_0_85V;
> > > - case VOLTAGE_INFO_0_95V:
> > > - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_95V);
> > > - return icl_combo_phy_ddi_translations_dp_hdmi_0_95V;
> > > - case VOLTAGE_INFO_1_05V:
> > > - *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_1_05V);
> > > - return icl_combo_phy_ddi_translations_dp_hdmi_1_05V;
> > > - default:
> > > - MISSING_CASE(voltage);
> > > - return NULL;
> > > - }
> > > +
> > > + if (type == INTEL_OUTPUT_HDMI) {
> > > + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_hdmi);
> > > + return icl_combo_phy_ddi_translations_hdmi;
> > > + } else if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
> > > + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_lowswing);
> > > + return icl_combo_phy_ddi_translations_edp_lowswing;
> >
> > Hm, both in the CNL and this ICL code, not sure why we would use the
> > HBR2 table when the low_vswing param is set. It would be more logical to
> > me that HBR2 is to be used when the actual link rate is HBR2, else we'd
> > use the HBR3 table. BXT, ICL still defined these low vswing tables but
> > CNL and ICL don't. We should at least ask for clarification about this
> > in BSpec.
>
> Based on the recent BSpec update, we should just ignore
> dev_priv->vbt.edp.low_vswing and use the "edp up to HBR2" table if the
> link rate is <= HBR2 and the "edp HBR3" table otherwise.
After Art's clarification I think the correct logic will be:
if (hdmi) {
return ...;
else if (rate == 8.1) // could check for edp too here i suppose
return icl_combo_phy_ddi_translations_edp_hbr3;
else if (edp && low_vswing)
return icl_combo_phy_ddi_translations_edp_hbr2;
else
return icl_combo_phy_ddi_translations_dp_hbr2;
And I believe icl_max_source_rate() needs to be changed to
something like:
if (is_combo_phy() && !edp)
return 5.4;
return 8.1;
>
> Could you resend the patch with that changed (and the 2 other issues
> above addressed)?
>
> Thanks,
> Imre
>
> >
> > Other than the above the patch looks ok, but I'd wait for the BSpec
> > clarification until adding R-b.
> >
> > > + } else if (type == INTEL_OUTPUT_EDP) {
> > > + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_hbr3);
> > > + return icl_combo_phy_ddi_translations_edp_hbr3;
> > > }
> > > +
> > > + *n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp);
> > > + return icl_combo_phy_ddi_translations_dp;
> > > }
> > >
> > > static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port)
> > > @@ -2464,7 +2405,7 @@ static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
> > > static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
> > > u32 level, enum port port, int type)
> > > {
> > > - const struct icl_combo_phy_ddi_buf_trans *ddi_translations = NULL;
> > > + const struct cnl_ddi_buf_trans *ddi_translations = NULL;
> > > u32 n_entries, val;
> > > int ln;
> > >
> > > @@ -2478,34 +2419,23 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
> > > level = n_entries - 1;
> > > }
> > >
> > > - /* Set PORT_TX_DW5 Rterm Sel to 110b. */
> > > + /* Set PORT_TX_DW5 */
> > > val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
> > > - val &= ~RTERM_SELECT_MASK;
> > > + val &= ~(SCALING_MODE_SEL_MASK | RTERM_SELECT_MASK |
> > > + TAP2_DISABLE | TAP3_DISABLE);
> > > + val |= SCALING_MODE_SEL(0x2);
> > > val |= RTERM_SELECT(0x6);
> > > - I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
> > > -
> > > - /* Program PORT_TX_DW5 */
> > > - val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
> > > - /* Set DisableTap2 and DisableTap3 if MIPI DSI
> > > - * Clear DisableTap2 and DisableTap3 for all other Ports
> > > - */
> > > - if (type == INTEL_OUTPUT_DSI) {
> > > - val |= TAP2_DISABLE;
> > > - val |= TAP3_DISABLE;
> > > - } else {
> > > - val &= ~TAP2_DISABLE;
> > > - val &= ~TAP3_DISABLE;
> > > - }
> > > + val |= TAP3_DISABLE;
> > > I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
> > >
> > > /* Program PORT_TX_DW2 */
> > > val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
> > > val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
> > > RCOMP_SCALAR_MASK);
> > > - val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_select);
> > > - val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_select);
> > > + val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
> > > + val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
> > > /* Program Rcomp scalar for every table entry */
> > > - val |= RCOMP_SCALAR(ddi_translations[level].dw2_swing_scalar);
> > > + val |= RCOMP_SCALAR(0x98);
> > > I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
> > >
> > > /* Program PORT_TX_DW4 */
> > > @@ -2514,9 +2444,17 @@ static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
> > > val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
> > > val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
> > > CURSOR_COEFF_MASK);
> > > - val |= ddi_translations[level].dw4_scaling;
> > > + val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
> > > + val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
> > > + val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
> > > I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
> > > }
> > > +
> > > + /* Program PORT_TX_DW7 */
> > > + val = I915_READ(ICL_PORT_TX_DW7_LN0(port));
> > > + val &= ~N_SCALAR_MASK;
> > > + val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
> > > + I915_WRITE(ICL_PORT_TX_DW7_GRP(port), val);
> > > }
> > >
> > > static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
> > > --
> > > 1.9.1
> > >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
