On Tue, 2018-12-04 at 12:02 -0800, Dhinakaran Pandiyan wrote:
> On Mon, 2018-12-03 at 16:34 -0800, José Roberto de Souza wrote:
> > According to eDP spec, sink can required specific selective update
> > granularity that source must comply.
> > Here caching the value if required and checking if source supports
> > it.
> >
> > v3:
> > - Returning the default granularity in case DPCD read
> > fails(Dhinakaran)
> > - Changed DPCD error message level(Dhinakaran)
> >
> > v4:
> > - Setting granularity to defaul when granularity read is equal to
> > 0(Dhinakaran)
> >
> > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/i915_drv.h | 1 +
> > drivers/gpu/drm/i915/intel_psr.c | 34
> > +++++++++++++++++++++++++++++-
> > --
> > 2 files changed, 32 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > b/drivers/gpu/drm/i915/i915_drv.h
> > index 12b8476b09a2..81618af7a5d7 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -508,6 +508,7 @@ struct i915_psr {
> > ktime_t last_exit;
> > bool sink_not_reliable;
> > bool irq_aux_error;
> > + u16 su_x_granularity;
> > };
> >
> > enum intel_pch {
> > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > b/drivers/gpu/drm/i915/intel_psr.c
> > index 298c3145212d..cb04d806f456 100644
> > --- a/drivers/gpu/drm/i915/intel_psr.c
> > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > @@ -261,6 +261,32 @@ static u8
> > intel_dp_get_sink_sync_latency(struct
> > intel_dp *intel_dp)
> > return val;
> > }
> >
> > +static u16 intel_dp_get_su_x_granulartiy(struct intel_dp
> > *intel_dp)
> > +{
> > + u16 val;
> > + ssize_t r;
> > +
> > + /*
> > + * Returning the default X granularity if granularity not
> > required or
> > + * if DPCD read fails
> > + */
> > + if (!(intel_dp->psr_dpcd[1] & DP_PSR2_SU_GRANULARITY_REQUIRED))
> > + return 4;
> > +
> > + r = drm_dp_dpcd_read(&intel_dp->aux, DP_PSR2_SU_X_GRANULARITY,
> > &val, 2);
> > + if (r != 2)
> > + DRM_DEBUG_KMS("Unable to read
> > DP_PSR2_SU_X_GRANULARITY\n");
> > +
> > + /*
> > + * Spec says that if the value read is 0 the default
> > granularity should
> > + * be used instead.
> > + */
> > + if (r != 2 || val == 0)
> > + val = 4;
> > +
> > + return val;
> > +}
> > +
> > void intel_psr_init_dpcd(struct intel_dp *intel_dp)
> > {
> > struct drm_i915_private *dev_priv =
> > @@ -315,6 +341,8 @@ void intel_psr_init_dpcd(struct intel_dp
> > *intel_dp)
> > if (dev_priv->psr.sink_psr2_support) {
> > dev_priv->psr.colorimetry_support =
> > intel_dp_get_colorimetry_status(intel_d
> > p);
> > + dev_priv->psr.su_x_granularity =
> > + intel_dp_get_su_x_granulartiy(intel_dp)
> > ;
> > }
> > }
> > }
> > @@ -541,9 +569,9 @@ static bool intel_psr2_config_valid(struct
> > intel_dp *intel_dp,
> > * X coordinate and Y granularity requirements will always be
> > met. We
> > * only need to validate the SU block width is a multiple of 4.
> This comment added in the previous patch is now outdated :) The patch
> looks good otherwise,
Good catch, thanks. I will update to:
-only need to validate the SU block width is a multiple of 4.
+only need to validate the SU block width is a multiple of x
granularity.
> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
>
> > */
> > - if (crtc_hdisplay % 4) {
> > - DRM_DEBUG_KMS("PSR2 not enabled, hdisplay(%d) not
> > multiple of 4\n",
> > - crtc_hdisplay);
> > + if (crtc_hdisplay % dev_priv->psr.su_x_granularity) {
> > + DRM_DEBUG_KMS("PSR2 not enabled, hdisplay(%d) not
> > multiple of %d\n",
> > + crtc_hdisplay, dev_priv-
> > > psr.su_x_granularity);
> > return false;
> > }
> >
Attachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
