Re: [PATCH v2 08/11] drm/i915/psr: Check if source supports sink specific SU granularity

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2018-12-03 at 15:12 -0800, Pandiyan, Dhinakaran wrote:
> On Mon, 2018-12-03 at 14:45 -0800, Souza, Jose wrote:
> > On Mon, 2018-12-03 at 12:59 -0800, Dhinakaran Pandiyan wrote:
> > > On Thu, 2018-11-29 at 18:25 -0800, José Roberto de Souza wrote:
> > > > According to eDP spec, sink can required specific selective
> > > > update
> > > > granularity that source must comply.
> > > > Here caching the value if required and checking if source
> > > > supports
> > > > it.
> > > > 
> > > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > > > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > > > ---
> > > >  drivers/gpu/drm/i915/i915_drv.h  |  1 +
> > > >  drivers/gpu/drm/i915/intel_psr.c | 21 ++++++++++++++++++++-
> > > >  2 files changed, 21 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/i915_drv.h
> > > > b/drivers/gpu/drm/i915/i915_drv.h
> > > > index 43ac6873a2bb..0727d8051dd3 100644
> > > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > > @@ -507,6 +507,7 @@ struct i915_psr {
> > > >  	ktime_t last_exit;
> > > >  	bool sink_not_reliable;
> > > >  	bool irq_aux_error;
> > > > +	u16 su_x_granularity;
> > > >  };
> > > >  
> > > >  enum intel_pch {
> > > > diff --git a/drivers/gpu/drm/i915/intel_psr.c
> > > > b/drivers/gpu/drm/i915/intel_psr.c
> > > > index 282ff1bc68a7..f9eccaac850a 100644
> > > > --- a/drivers/gpu/drm/i915/intel_psr.c
> > > > +++ b/drivers/gpu/drm/i915/intel_psr.c
> > > > @@ -261,6 +261,23 @@ static u8
> > > > intel_dp_get_sink_sync_latency(struct
> > > > intel_dp *intel_dp)
> > > >  	return val;
> > > >  }
> > > >  
> > > > +static u16 intel_dp_get_su_x_granulartiy(struct intel_dp
> > > > *intel_dp)
> > > > +{
> > > > +	u16 val;
> > > > +	ssize_t r;
> > > > +
> > > > +	if (!(intel_dp->psr_dpcd[1] &
> > > > DP_PSR2_SU_GRANULARITY_REQUIRED))
> > > > {
> > > > +		/* Returning the default X granularity */
> > > > +		return 4;
> > > > +	}
> > > 
> > > nit: Braces not needed, you could move the comment a line above.
> > > 
> > > A value of 0 in this DPCD indicates there is no granularity
> > > requirement, why assume 4? 
> > 
> > Like you said bellow, 4 is the default granularity if this is not
> > set.
> > 
> The spec states 0 means no granularity requirements, return 1 here?


A value of 0 indicates that no X-coordinate granularity requirement
exists other than
the standard restrictions, wherein the:

Starting X-coordinate must be evenly divisible by 16

Rectangle width must be evenly divisible by 4

> 
> > > > +
> > > > +	r = drm_dp_dpcd_read(&intel_dp->aux,
> > > > DP_PSR2_SU_X_GRANULARITY,
> > > > &val, 2);
> > > > +	if (r != 2)
> > > > +		DRM_WARN("Unable to read
> > > > DP_PSR2_SU_X_GRANULARITY\n");
> > > 
> > > Please change this to the warning level that we use elsewhere for
> > > aux
> > > failures.
> > 
> > So changing to DRM_DEBUG_KMS()
> > 
> > > If I'm reading the spec correctly, a value of 0 in this DPCD
> > > means
> > > the
> > > sink expects a granularity of 4, so returning 0 would be
> > > incorrect.
> > > 
> > > > +
> > > > +	return val;
> > > 
> > > Assume the default value of 4 if aux read fails (after printing
> > > an
> > > error)
> > > 
> > 
> > Done
> > 
> > 
> > > > +}
> > > > +
> > > >  void intel_psr_init_dpcd(struct intel_dp *intel_dp)
> > > >  {
> > > >  	struct drm_i915_private *dev_priv =
> > > > @@ -315,6 +332,8 @@ void intel_psr_init_dpcd(struct intel_dp
> > > > *intel_dp)
> > > >  		if (dev_priv->psr.sink_psr2_support) {
> > > >  			dev_priv->psr.colorimetry_support =
> > > >  				intel_dp_get_colorimetry_status
> > > > (intel_d
> > > > p);
> > > > +			dev_priv->psr.su_x_granularity =
> > > > +				intel_dp_get_su_x_granulartiy(i
> > > > ntel_dp)
> > > > ;
> > > >  		}
> > > >  	}
> > > >  }
> > > > @@ -546,7 +565,7 @@ static bool intel_psr2_config_valid(struct
> > > > intel_dp *intel_dp,
> > > >  	 * at each 4 lines with height of 4 lines, what eDP
> > > > states
> > > >  	 * that sink should support.
> > > >  	 */
> > > > -	if (crtc_hdisplay % 4) {
> > > > +	if (crtc_hdisplay % dev_priv->psr.su_x_granularity) {
> > > >  		DRM_DEBUG_KMS("PSR2 not enabled, default SU
> > > > granularity
> > > > not match\n");
> > > >  		return false;
> > > >  	}

Attachment: signature.asc
Description: This is a digitally signed message part

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux