The vlv/icl_dphy_param_init calls do various calculations to set dphy
parameters based on the pclk.
Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
vlv_dsi_init a chance to tweak the pclk before these calculations are done.
This also removes the single "if (IS_ICELAKE(dev_priv))" check from
intel_dsi_vbt_init making it fully platform agnostic.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dsi.h | 2 ++
drivers/gpu/drm/i915/intel_dsi_vbt.c | 9 ++-------
drivers/gpu/drm/i915/vlv_dsi.c | 2 ++
3 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi.h b/drivers/gpu/drm/i915/intel_dsi.h
index 49437b02b213..c888c219835f 100644
--- a/drivers/gpu/drm/i915/intel_dsi.h
+++ b/drivers/gpu/drm/i915/intel_dsi.h
@@ -180,5 +180,7 @@ int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi);
void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
enum mipi_seq seq_id);
void intel_dsi_msleep(struct intel_dsi *intel_dsi, int msec);
+void icl_dphy_param_init(struct intel_dsi *intel_dsi);
+void vlv_dphy_param_init(struct intel_dsi *intel_dsi);
#endif /* _INTEL_DSI_H */
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 2afd9ddc94e8..f27af47c6e49 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -556,7 +556,7 @@ static void intel_dsi_log_params(struct intel_dsi *intel_dsi)
#define ICL_HS_ZERO_CNT_MAX 0xf
#define ICL_EXIT_ZERO_CNT_MAX 0x7
-static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
+void icl_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -655,7 +655,7 @@ static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
intel_dsi_log_params(intel_dsi);
}
-static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
+void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
@@ -892,11 +892,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
intel_dsi->burst_mode_ratio = burst_mode_ratio;
- if (IS_ICELAKE(dev_priv))
- icl_dphy_param_init(intel_dsi);
- else
- vlv_dphy_param_init(intel_dsi);
-
/* delays in VBT are in unit of 100us, so need to convert
* here in ms
* Delay (100us) * 100 /1000 = Delay / 10 (ms) */
diff --git a/drivers/gpu/drm/i915/vlv_dsi.c b/drivers/gpu/drm/i915/vlv_dsi.c
index d42ccd127ff4..2ae1124dbf77 100644
--- a/drivers/gpu/drm/i915/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/vlv_dsi.c
@@ -1797,6 +1797,8 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
goto err;
}
+ vlv_dphy_param_init(intel_dsi);
+
/*
* In case of BYT with CRC PMIC, we need to use GPIO for
* Panel control.
--
2.19.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
