Regards
Shashank
On 11/27/2018 10:10 PM, Uma Shankar wrote:
This patch adds a HDMI colorspace property, enabling
userspace to switch to various supported colorspaces.
This will help enable BT2020 along with other colorspaces.
v2: Addressed Maarten and Ville's review comments. Enhanced
the colorspace enum to incorporate both HDMI and DP supported
colorspaces. Also, added a default option for colorspace.
v3: Removed Adobe references from enum definitions as per
Ville, Hans Verkuil and Jonas Karlman suggestions. Changed
Default to an unset state where driver will assign the colorspace
is not chosen by user, suggested by Ville and Maarten. Addressed
other misc review comments from Maarten. Split the changes to
have separate colorspace property for DP and HDMI.
v4: Addressed Chris and Ville's review comments, and created a
common colorspace property for DP and HDMI, filtered the list
based on the colorspaces supported by the respective protocol
standard.
Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
---
drivers/gpu/drm/drm_atomic_uapi.c | 4 +++
drivers/gpu/drm/drm_connector.c | 61 +++++++++++++++++++++++++++++++++++++++
include/drm/drm_connector.h | 14 +++++++++
include/uapi/drm/drm_mode.h | 33 +++++++++++++++++++++
4 files changed, 112 insertions(+)
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 86ac339..9df7520 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -729,6 +729,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
return -EINVAL;
}
state->content_protection = val;
+ } else if (property == connector->colorspace_property) {
+ state->colorspace = val;
} else if (property == config->writeback_fb_id_property) {
struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, NULL, val);
int ret = drm_atomic_set_writeback_fb_for_connector(state, fb);
@@ -797,6 +799,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
*val = state->picture_aspect_ratio;
} else if (property == config->content_type_property) {
*val = state->content_type;
+ } else if (property == connector->colorspace_property) {
+ *val = state->colorspace;
} else if (property == connector->scaling_mode_property) {
*val = state->scaling_mode;
} else if (property == connector->content_protection_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index fa9baac..57d36e4 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -826,6 +826,30 @@ int drm_display_info_set_bus_formats(struct drm_display_info *info,
};
DRM_ENUM_NAME_FN(drm_get_content_protection_name, drm_cp_enum_list)
+static const struct drm_prop_enum_list hdmi_colorspace[] = {
+ /* For Default case, driver will set the colorspace */
+ { COLORIMETRY_DEFAULT, "Default" },
+ /* Standard Definition Colorimetry based on CEA 861 */
+ { COLORIMETRY_ITU_601, "ITU_601" },
+ { COLORIMETRY_ITU_709, "ITU_709" },
+ /* Standard Definition Colorimetry based on IEC 61966-2-4 */
+ { COLORIMETRY_XV_YCC_601, "XV_YCC_601" },
+ /* High Definition Colorimetry based on IEC 61966-2-4 */
+ { COLORIMETRY_XV_YCC_709, "XV_YCC_709" },
+ /* Colorimetry based on IEC 61966-2-1/Amendment 1 */
+ { COLORIMETRY_S_YCC_601, "S_YCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 [33] */
+ { COLORIMETRY_OPYCC_601, "opYCC_601" },
+ /* Colorimetry based on IEC 61966-2-5 */
+ { COLORIMETRY_OPRGB, "opRGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { COLORIMETRY_BT2020_RGB, "BT2020_RGB" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { COLORIMETRY_BT2020_YCC, "BT2020_YCC" },
+ /* Colorimetry based on ITU-R BT.2020 */
+ { COLORIMETRY_BT2020_CYCC, "BT2020_CYCC" },
This still doesn't help us with the platform specific colorspace
support, like:
Even for HDMI, Until GEN10, we don't want to add BT2020 colorspace enum
values for Intel driver, which would be difficult to know for a user.
How about we modify the design a drm helper bit like this:
1. Keep the absolute_colorimetry_list as the full range of colorimetry
enum values supported by DRM for HDMI display
2. Make the DRM helper accept a series/subset of these enum values,
which will be passed from the core driver (like I915), and the DRM
functions creates property with these passed values.
3. Call the DRM helper function from functions core driver function
(like intel_ddi_init()) from where we already know:
- Which display to select enum values from (HDMI/DP)
- Which enum values to pick based on current platform (Like if GEN
< GEN9, add dont add REC_2020 etc)
- Shashank
+};
+
/**
* DOC: standard connector properties
*
@@ -1402,6 +1426,43 @@ int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
/**
+ * drm_mode_create_colorspace_property - create colorspace property
+ * Colorspace:
+ * This property helps select a suitable colorspace based on the sink
+ * capability. Modern sink devices support wider gamut like BT2020.
+ * This helps switch to BT2020 mode if the BT2020 encoded video stream
+ * is being played by the user, same for any other colorspace.
+ * @connector: connector to set property on.
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_create_colorspace_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_property *prop;
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
+
+ prop = drm_property_create_enum(dev, DRM_MODE_PROP_ENUM,
+ "Colorspace",
+ hdmi_colorspace,
+ ARRAY_SIZE(hdmi_colorspace));
+ if (!prop)
+ return -ENOMEM;
+ }
+
+ connector->colorspace_property = prop;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_colorspace_property);
+
+/**
* drm_mode_create_content_type_property - create content type property
* @dev: DRM device
*
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 665b9ca..e98efb1 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -497,6 +497,13 @@ struct drm_connector_state {
unsigned int content_protection;
/**
+ * @colorspace: Connector property to request colorspace
+ * change on Sink. This is most commonly used to switch to
+ * wider color gamuts like BT2020.
+ */
+ enum absolute_colorimetry_list colorspace;
+
+ /**
* @writeback_job: Writeback job for writeback connectors
*
* Holds the framebuffer and out-fence for a writeback connector. As
@@ -978,6 +985,12 @@ struct drm_connector {
struct drm_property *content_protection_property;
/**
+ * @colorspace_property: Connector property to set the suitable
+ * colorspace supported by the sink.
+ */
+ struct drm_property *colorspace_property;
+
+ /**
* @path_blob_ptr:
*
* DRM blob property data for the DP MST path property. This should only
@@ -1248,6 +1261,7 @@ int drm_connector_attach_scaling_mode_property(struct drm_connector *connector,
int drm_connector_attach_content_protection_property(
struct drm_connector *connector);
int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
+int drm_mode_create_colorspace_property(struct drm_connector *connector);
int drm_mode_create_content_type_property(struct drm_device *dev);
void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
const struct drm_connector_state *conn_state);
diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
index d3e0fe3..42efab8 100644
--- a/include/uapi/drm/drm_mode.h
+++ b/include/uapi/drm/drm_mode.h
@@ -210,6 +210,39 @@
#define DRM_MODE_CONTENT_PROTECTION_DESIRED 1
#define DRM_MODE_CONTENT_PROTECTION_ENABLED 2
+/*
+ * This is a consolidated colorimetry list supported by HDMI and
+ * DP protocol standard. The respective connectors will register
+ * a property with the subset of this list (supported by that
+ * respective protocol). Userspace will set the colorspace through
+ * a colorspace property which will be created and exposed to
+ * userspace.
+ */
+enum absolute_colorimetry_list {
+ /* For Default case, driver will set the colorspace */
+ COLORIMETRY_DEFAULT = 0,
+ /* CEA 861 Normal Colorimetry options */
+ COLORIMETRY_ITU_601,
+ COLORIMETRY_ITU_709,
+ /* CEA 861 Extended Colorimetry Options */
+ COLORIMETRY_XV_YCC_601,
+ COLORIMETRY_XV_YCC_709,
+ COLORIMETRY_S_YCC_601,
+ COLORIMETRY_OPYCC_601,
+ COLORIMETRY_OPRGB,
+ COLORIMETRY_BT2020_RGB,
+ COLORIMETRY_BT2020_YCC,
+ COLORIMETRY_BT2020_CYCC,
+ /* DP MSA Colorimetry Options */
+ DP_COLORIMETRY_Y_CBCR_ITU_601,
+ DP_COLORIMETRY_Y_CBCR_ITU_709,
+ DP_COLORIMETRY_SRGB,
+ DP_COLORIMETRY_RGB_WIDE_GAMUT,
+ DP_COLORIMETRY_SCRGB,
+ DP_COLORIMETRY_DCI_P3,
+ DP_COLORIMETRY_CUSTOM_COLOR_PROFILE,
+};
+
struct drm_mode_modeinfo {
__u32 clock;
__u16 hdisplay;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
