On Tue, Nov 20, 2018 at 10:37:35AM -0800, Manasi Navare wrote:
> From: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
>
> If FEC is supported, the corresponding
> DP_TP_CTL register bits have to be configured.
>
> The driver has to program the FEC_ENABLE in DP_TP_CTL[30] register
> and wait till FEC_STATUS in DP_TP_CTL[28] is 1.
> Also add the warn message to make sure that the control
> register is already active while enabling FEC.
>
> v2:
> - Change commit message. Configure fec state after
> link training (Manasi, Gaurav)
> - Remove redundent checks (Manasi)
> - Remove the registers that get added automagically (Anusha)
>
> v3: s/intel_dp_set_fec_state()/intel_dp_enable_fec_state() (Gaurav)
>
> v4: rebased.
>
> v5:
> - Move the code to the proper spot, according to spec.(Ville)
> - Use fec state as a check too.
>
> v6: Pass intel_encoder, instead of intel_dp. (Ville)
>
> v7: Remove unwanted comments (Manasi)
>
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
Reviewed-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
Manasi
> ---
> drivers/gpu/drm/i915/i915_reg.h | 2 ++
> drivers/gpu/drm/i915/intel_ddi.c | 23 +++++++++++++++++++++++
> 2 files changed, 25 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 21e82c03cf80..5713754ace99 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -9198,6 +9198,7 @@ enum skl_power_gate {
> #define _DP_TP_CTL_B 0x64140
> #define DP_TP_CTL(port) _MMIO_PORT(port, _DP_TP_CTL_A, _DP_TP_CTL_B)
> #define DP_TP_CTL_ENABLE (1 << 31)
> +#define DP_TP_CTL_FEC_ENABLE (1 << 30)
> #define DP_TP_CTL_MODE_SST (0 << 27)
> #define DP_TP_CTL_MODE_MST (1 << 27)
> #define DP_TP_CTL_FORCE_ACT (1 << 25)
> @@ -9216,6 +9217,7 @@ enum skl_power_gate {
> #define _DP_TP_STATUS_A 0x64044
> #define _DP_TP_STATUS_B 0x64144
> #define DP_TP_STATUS(port) _MMIO_PORT(port, _DP_TP_STATUS_A, _DP_TP_STATUS_B)
> +#define DP_TP_STATUS_FEC_ENABLE_LIVE (1 << 28)
> #define DP_TP_STATUS_IDLE_DONE (1 << 25)
> #define DP_TP_STATUS_ACT_SENT (1 << 24)
> #define DP_TP_STATUS_MODE_STATUS_MST (1 << 23)
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index b778e6fed5f8..78d8dcaa1618 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -3112,6 +3112,27 @@ static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp,
> DRM_DEBUG_KMS("Failed to set FEC_READY in the sink\n");
> }
>
> +static void intel_ddi_enable_fec(struct intel_encoder *encoder,
> + const struct intel_crtc_state *crtc_state)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + enum port port = encoder->port;
> + u32 val;
> +
> + if (!crtc_state->fec_enable)
> + return;
> +
> + val = I915_READ(DP_TP_CTL(port));
> + val |= DP_TP_CTL_FEC_ENABLE;
> + I915_WRITE(DP_TP_CTL(port), val);
> +
> + if (intel_wait_for_register(dev_priv, DP_TP_STATUS(port),
> + DP_TP_STATUS_FEC_ENABLE_LIVE,
> + DP_TP_STATUS_FEC_ENABLE_LIVE,
> + 1))
> + DRM_ERROR("Timed out waiting for FEC Enable Status\n");
> +}
> +
> static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
> const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state)
> @@ -3157,6 +3178,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
> if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
> intel_dp_stop_link_train(intel_dp);
>
> + intel_ddi_enable_fec(encoder, crtc_state);
> +
> icl_enable_phy_clock_gating(dig_port);
>
> if (!is_mst)
> --
> 2.19.1
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
