Re: [PATCH 2/6] drm/i915/icl: Use the same pll functions for dsi

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Kulkarni, Vandita
> Sent: Tuesday, November 27, 2018 3:09 PM
> To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> Cc: Chauhan, Madhav <madhav.chauhan@xxxxxxxxx>; Nikula, Jani
> <jani.nikula@xxxxxxxxx>; Syrjala, Ville <ville.syrjala@xxxxxxxxx>; Kulkarni,
> Vandita <vandita.kulkarni@xxxxxxxxx>
> Subject: [PATCH 2/6] drm/i915/icl: Use the same pll functions for dsi
> 
> The same pll manager functions can be used to enable dpll for mipi. Hence
> enabling the IO power and esc clock as part of pre pll enable call.
> 
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/icl_dsi.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
> index 89ede31..8590825 100644
> --- a/drivers/gpu/drm/i915/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/icl_dsi.c
> @@ -924,17 +924,22 @@ static void gen11_dsi_powerup_panel(struct
> intel_encoder *encoder)
>  	wait_for_cmds_dispatched_to_panel(encoder);
>  }
> 
> -static void gen11_dsi_pre_enable(struct intel_encoder *encoder,
> +static void gen11_dsi_pre_pll_enable(struct intel_encoder *encoder,
>  				 const struct intel_crtc_state *pipe_config,
>  				 const struct drm_connector_state

Correct the alignment of pipe_config and connector_state.
With that fix,
Reviewed-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>

Regards,
Madhav

> *conn_state)  {
> -	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> -
>  	/* step2: enable IO power */
>  	gen11_dsi_enable_io_power(encoder);
> 
>  	/* step3: enable DSI PLL */
>  	gen11_dsi_program_esc_clk_div(encoder);
> +}
> +
> +static void gen11_dsi_pre_enable(struct intel_encoder *encoder,
> +				 const struct intel_crtc_state *pipe_config,
> +				 const struct drm_connector_state
> *conn_state) {
> +	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> 
>  	/* step4: enable DSI port and DPHY */
>  	gen11_dsi_enable_port_and_phy(encoder, pipe_config); @@ -
> 1305,6 +1310,7 @@ void icl_dsi_init(struct drm_i915_private *dev_priv)
>  			 DRM_MODE_ENCODER_DSI, "DSI %c",
> port_name(port));
> 
>  	encoder->pre_enable = gen11_dsi_pre_enable;
> +	encoder->pre_pll_enable = gen11_dsi_pre_pll_enable;
>  	encoder->disable = gen11_dsi_disable;
>  	encoder->port = port;
>  	encoder->get_config = gen11_dsi_get_config;
> --
> 1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux