On Mon, Nov 19, 2018 at 10:19:42PM +0200, Ville Syrjälä wrote:
> On Tue, Nov 13, 2018 at 05:52:30PM -0800, Manasi Navare wrote:
> > From: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> >
> > If the panel supports FEC, the driver has to
> > set the FEC_READY bit in the dpcd register:
> > FEC_CONFIGURATION.
> >
> > This has to happen before link training.
> >
> > v2: s/intel_dp_set_fec_ready/intel_dp_sink_set_fec_ready
> > - change commit message. (Gaurav)
> >
> > v3: rebased. (r-b Manasi)
> >
> > v4: Use fec crtc state, before setting FEC_READY
> > bit. (Anusha)
> >
> > v5: Move to intel_ddi.c
> > - Make the function static (Anusha)
> >
> > v6: Dont pass state as a separate argument (Ville)
> >
> > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > Cc: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
> > Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> > Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> > Reviewed-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_ddi.c | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index 0638fd2febfb..2d15520f13c5 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -3102,6 +3102,16 @@ static void icl_program_mg_dp_mode(struct intel_digital_port *intel_dig_port)
> > I915_WRITE(MG_DP_MODE(port, 1), ln1);
> > }
> >
> > +static void intel_dp_sink_set_fec_ready(struct intel_dp *intel_dp,
> > + const struct intel_crtc_state *crtc_state)
> > +{
> > + if (!crtc_state->fec_enable)
> > + return;
> > +
> > + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_FEC_CONFIGURATION, DP_FEC_READY) <= 0)
> > + DRM_DEBUG_KMS("Failed to get FEC enabled in sink\n");
>
> The debug message is still bonkers.
Should I get rid of the debug message here?
Manasi
>
> > +}
> > +
> > static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
> > const struct intel_crtc_state *crtc_state,
> > const struct drm_connector_state *conn_state)
> > @@ -3142,6 +3152,7 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
> > intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
> > intel_dp_sink_set_decompression_state(intel_dp, crtc_state,
> > true);
> > + intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
> > intel_dp_start_link_train(intel_dp);
> > if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
> > intel_dp_stop_link_train(intel_dp);
> > --
> > 2.19.1
>
> --
> Ville Syrjälä
> Intel
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
