On Wed, Nov 07, 2018 at 08:29:53PM +0200, Ville Syrjälä wrote:
> On Thu, Nov 01, 2018 at 11:13:50AM -0700, Rodrigo Vivi wrote:
> > On Thu, Nov 01, 2018 at 05:17:36PM +0200, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > >
> > > Remove the "sizes are 0 based" stuff that is not even true for the
> > > scaler.
> > >
> > > v2: Rebase
> > >
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > Reviewed-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
>
> Thanks. First two patches pushed.
And now also 3-5 and 8. The rest had some amount of discussion still
happening, so I'll refrain from pushing more until I address Matt's
comments and repost the remaining patches.
Thanks for the reviews so far.
>
> >
> > > ---
> > > drivers/gpu/drm/i915/intel_sprite.c | 18 +++++-------------
> > > 1 file changed, 5 insertions(+), 13 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> > > index 30b7485f1992..a77a17fda692 100644
> > > --- a/drivers/gpu/drm/i915/intel_sprite.c
> > > +++ b/drivers/gpu/drm/i915/intel_sprite.c
> > > @@ -310,12 +310,11 @@ skl_plane_max_stride(struct intel_plane *plane,
> > > }
> > >
> > > static void
> > > -skl_program_scaler(struct drm_i915_private *dev_priv,
> > > - struct intel_plane *plane,
> > > +skl_program_scaler(struct intel_plane *plane,
> > > const struct intel_crtc_state *crtc_state,
> > > const struct intel_plane_state *plane_state)
> > > {
> > > - enum plane_id plane_id = plane->id;
> > > + struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> > > enum pipe pipe = plane->pipe;
> > > int scaler_id = plane_state->scaler_id;
> > > const struct intel_scaler *scaler =
> > > @@ -327,10 +326,6 @@ skl_program_scaler(struct drm_i915_private *dev_priv,
> > > u16 y_hphase, uv_rgb_hphase;
> > > u16 y_vphase, uv_rgb_vphase;
> > >
> > > - /* Sizes are 0 based */
> > > - crtc_w--;
> > > - crtc_h--;
> > > -
> > > /* TODO: handle sub-pixel coordinates */
> > > if (plane_state->base.fb->format->format == DRM_FORMAT_NV12 &&
> > > !icl_is_hdr_plane(plane)) {
> > > @@ -350,15 +345,14 @@ skl_program_scaler(struct drm_i915_private *dev_priv,
> > > }
> > >
> > > I915_WRITE_FW(SKL_PS_CTRL(pipe, scaler_id),
> > > - PS_SCALER_EN | PS_PLANE_SEL(plane_id) | scaler->mode);
> > > + PS_SCALER_EN | PS_PLANE_SEL(plane->id) | scaler->mode);
> > > I915_WRITE_FW(SKL_PS_PWR_GATE(pipe, scaler_id), 0);
> > > I915_WRITE_FW(SKL_PS_VPHASE(pipe, scaler_id),
> > > PS_Y_PHASE(y_vphase) | PS_UV_RGB_PHASE(uv_rgb_vphase));
> > > I915_WRITE_FW(SKL_PS_HPHASE(pipe, scaler_id),
> > > PS_Y_PHASE(y_hphase) | PS_UV_RGB_PHASE(uv_rgb_hphase));
> > > I915_WRITE_FW(SKL_PS_WIN_POS(pipe, scaler_id), (crtc_x << 16) | crtc_y);
> > > - I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id),
> > > - ((crtc_w + 1) << 16)|(crtc_h + 1));
> > > + I915_WRITE_FW(SKL_PS_WIN_SZ(pipe, scaler_id), (crtc_w << 16) | crtc_h);
> > > }
> > >
> > > static void
> > > @@ -441,11 +435,9 @@ skl_program_plane(struct intel_plane *plane,
> > > I915_WRITE_FW(PLANE_CUS_CTL(pipe, plane_id), cus_ctl);
> > > }
> > >
> > > - /* program plane scaler */
> > > if (plane_state->scaler_id >= 0) {
> > > if (!slave)
> > > - skl_program_scaler(dev_priv, plane,
> > > - crtc_state, plane_state);
> > > + skl_program_scaler(plane, crtc_state, plane_state);
> > >
> > > I915_WRITE_FW(PLANE_POS(pipe, plane_id), 0);
> > > } else {
> > > --
> > > 2.18.1
> > >
> > > _______________________________________________
> > > Intel-gfx mailing list
> > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> --
> Ville Syrjälä
> Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
