Re: [PATCH v2 3/4] drm/i915: set optimum eu/slice/sub-slice configuration based on load type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 06/11/2018 04:13, Ankit Navik wrote:
From: Praveen Diwakar <praveen.diwakar@xxxxxxxxx>

This patch will select optimum eu/slice/sub-slice configuration based on
type of load (low, medium, high) as input.
Based on our readings and experiments we have predefined set of optimum
configuration for each platform(CHT, KBL).
i915_gem_context_set_load_type will select optimum configuration from
pre-defined optimum configuration table(opt_config).

It also introduce flag update_render_config which can set by any governor.

Patch changelog is missing here and in the first patch.

Signed-off-by: Praveen Diwakar <praveen.diwakar@xxxxxxxxx>
Signed-off-by: Yogesh Marathe <yogesh.marathe@xxxxxxxxx>
Signed-off-by: Aravindan Muthukumar <aravindan.muthukumar@xxxxxxxxx>
Signed-off-by: Kedar J Karanje <kedar.j.karanje@xxxxxxxxx>
Signed-off-by: Ankit Navik <ankit.p.navik@xxxxxxxxx>
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/i915/i915_drv.h          |  2 ++
  drivers/gpu/drm/i915/i915_gem_context.c  | 21 +++++++++++++++
  drivers/gpu/drm/i915/i915_gem_context.h  | 30 ++++++++++++++++++++++
  drivers/gpu/drm/i915/intel_device_info.c | 44 ++++++++++++++++++++++++++++++--
  drivers/gpu/drm/i915/intel_lrc.c         |  4 ++-
  5 files changed, 98 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 137ec33..f1b16d0 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1686,6 +1686,8 @@ struct drm_i915_private {
  	struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */
  	int num_fence_regs; /* 8 on pre-965, 16 otherwise */
+ struct optimum_config opt_config[LOAD_TYPE_MAX];
+
  	unsigned int fsb_freq, mem_freq, is_ddr3;
  	unsigned int skl_preferred_vco_freq;
  	unsigned int max_cdclk_freq;
diff --git a/drivers/gpu/drm/i915/i915_gem_context.c b/drivers/gpu/drm/i915/i915_gem_context.c
index d040858..28ff868 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.c
+++ b/drivers/gpu/drm/i915/i915_gem_context.c
@@ -388,14 +388,35 @@ i915_gem_create_context(struct drm_i915_private *dev_priv,
trace_i915_context_create(ctx);
  	atomic_set(&ctx->req_cnt, 0);
+	ctx->update_render_config = 0;
  	ctx->slice_cnt = hweight8(INTEL_INFO(dev_priv)->sseu.slice_mask);
  	ctx->subslice_cnt = hweight8(
  			INTEL_INFO(dev_priv)->sseu.subslice_mask[0]);
  	ctx->eu_cnt = INTEL_INFO(dev_priv)->sseu.eu_per_subslice;
+	ctx->load_type = 0;
+	ctx->pending_load_type = 0;
return ctx;
  }
+
+void i915_gem_context_set_load_type(struct i915_gem_context *ctx,
+		enum gem_load_type type)
+{
+	struct drm_i915_private *dev_priv = ctx->i915;
+

To be safe I suggest:

if (GEM_WARN_ON(type > LOAD_TYPE_MAX))
	return;

+	/* Call opt_config to get correct configuration for eu,slice,subslice */
+	ctx->slice_cnt = dev_priv->opt_config[type].slice;
+	ctx->subslice_cnt = dev_priv->opt_config[type].subslice;
+	ctx->eu_cnt = dev_priv->opt_config[type].eu;
+
+	/* Enabling this to update the rpcs */
+	if (ctx->pending_load_type != type)
+		ctx->update_render_config = 1;
+
+	ctx->pending_load_type = type;
+}
+
  /**
   * i915_gem_context_create_gvt - create a GVT GEM context
   * @dev: drm device *
diff --git a/drivers/gpu/drm/i915/i915_gem_context.h b/drivers/gpu/drm/i915/i915_gem_context.h
index 2b3bf09..9345aa3 100644
--- a/drivers/gpu/drm/i915/i915_gem_context.h
+++ b/drivers/gpu/drm/i915/i915_gem_context.h
@@ -53,6 +53,19 @@ struct intel_context_ops {
  	void (*destroy)(struct intel_context *ce);
  };
+enum gem_load_type {
+	LOAD_TYPE_LOW,
+	LOAD_TYPE_MEDIUM,
+	LOAD_TYPE_HIGH,
+	LOAD_TYPE_MAX

Max is actually max plus one. Maybe instead have it as:

	LOAD_TYPE_LAST = LOAD_TYPE_HIGH,

+};
+
+struct optimum_config {

Struct name needs to be more specific to avoid namespace clashes. Perhaps i915_sseu_optimum_config?

+	u8 slice;
+	u8 subslice;
+	u8 eu;
+};
+
  /**
   * struct i915_gem_context - client state
   *
@@ -209,6 +222,21 @@ struct i915_gem_context {
/** eu_cnt: used to set the # of eu to be enabled. */
  	u8 eu_cnt;
+
+	/** update_render_config: to track the updates to the render
+	 * configuration (S/SS/EU Configuration on the GPU)
+	 */
+	bool update_render_config;
+
+	/** load_type: The designated load_type (high/medium/low) for a given
+	 * number of pending commands in the command queue.
+	 */
+	enum gem_load_type load_type;

load_type looks unused in this patch.

+
+	/** pending_load_type: The earlier load type that the GPU was configured
+	 * for (high/medium/low).
+	 */
+	enum gem_load_type pending_load_type;
  };
static inline bool i915_gem_context_is_closed(const struct i915_gem_context *ctx)
@@ -337,6 +365,8 @@ int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data,
  				    struct drm_file *file_priv);
  int i915_gem_context_reset_stats_ioctl(struct drm_device *dev, void *data,
  				       struct drm_file *file);
+void i915_gem_context_set_load_type(struct i915_gem_context *ctx,
+		enum gem_load_type type);
struct i915_gem_context *
  i915_gem_context_create_kernel(struct drm_i915_private *i915, int prio);
diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
index 0ef0c64..4c6224a 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -741,6 +741,27 @@ void intel_device_info_runtime_init(struct intel_device_info *info)
  		container_of(info, struct drm_i915_private, info);
  	enum pipe pipe;
+ /* static table of slice/subslice/EU for Cherrytrial */

Cherryview? At least a typo in trail.

+	struct optimum_config chv_config[LOAD_TYPE_MAX] = {
+		{1, 1, 4},	/* Low */
+		{1, 1, 6},	/* Medium */
+		{1, 2, 6}	/* High */
+	};
+
+	/* static table of slice/subslice/EU for KBL GT2 */
+	struct optimum_config kbl_gt2_config[LOAD_TYPE_MAX] = {
+		{1, 3, 2},	/* Low */
+		{1, 3, 4},	/* Medium */
+		{1, 3, 8}	/* High */
+	};
+
+	/* static table of slice/subslice/EU for KBL GT3 */
+	struct optimum_config kbl_gt3_config[LOAD_TYPE_MAX] = {
+		{2, 3, 4},	/* Low */
+		{2, 3, 6},	/* Medium */
+		{2, 3, 8}	/* High */
+	};
+
  	if (INTEL_GEN(dev_priv) >= 10) {
  		for_each_pipe(dev_priv, pipe)
  			info->num_scalers[pipe] = 2;
@@ -840,12 +861,31 @@ void intel_device_info_runtime_init(struct intel_device_info *info)
  	/* Initialize slice/subslice/EU info */
  	if (IS_HASWELL(dev_priv))
  		haswell_sseu_info_init(dev_priv);
-	else if (IS_CHERRYVIEW(dev_priv))
+	else if (IS_CHERRYVIEW(dev_priv)) {
  		cherryview_sseu_info_init(dev_priv);
+		memcpy(dev_priv->opt_config, chv_config, sizeof(chv_config));
+	}
  	else if (IS_BROADWELL(dev_priv))
  		broadwell_sseu_info_init(dev_priv);
-	else if (INTEL_GEN(dev_priv) == 9)
+	else if (INTEL_GEN(dev_priv) == 9) {
  		gen9_sseu_info_init(dev_priv);
+
+		if (IS_KABYLAKE(dev_priv)) {
+			switch (info->gt) {
+			default:
+				MISSING_CASE(info->gt);
+				/* fall through */
+			case 2:
+				memcpy(dev_priv->opt_config, kbl_gt2_config,
+						sizeof(kbl_gt2_config));
+			break;
+			case 3:
+				memcpy(dev_priv->opt_config, kbl_gt3_config,
+						sizeof(kbl_gt3_config));

As an alternative to many memcpy you could have:

	opt_config = NULL;
	...
	opt_config = kbl_gt2_config;
	...
	if (opt_config)
		memcpy(dev_priv->opt_config, opt_config, ...);

Or you could actually just store the pointer to rodata table in dev_priv, if you moved the tables to global scope as static const.

Both approaches are increasingly space efficient I think.

+			break;
+			}
+		}
+	}
  	else if (INTEL_GEN(dev_priv) == 10)
  		gen10_sseu_info_init(dev_priv);
  	else if (INTEL_GEN(dev_priv) >= 11)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index a8ab71a..4d000eb 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -427,11 +427,13 @@ static u64 execlists_update_context(struct i915_request *rq)
reg_state[CTX_RING_TAIL+1] = intel_ring_set_tail(rq->ring, rq->tail);
  	/* FIXME: To avoid stale rpcs config, move it to context_pin */
-	if (ctx->pid && ctx->name && (rq->engine->id == RCS)) {
+	if (ctx->pid && ctx->name && (rq->engine->id == RCS) &&
+			ctx->update_render_config) {

Could you do if ctx->load_type != ctx->pending_load_type here and lose the need for ctx->update_render_config?

  		rpcs_config = make_rpcs(ctx->i915);
  		reg_state[CTX_LRI_HEADER_2] = MI_LOAD_REGISTER_IMM(1);
  		CTX_REG(reg_state, CTX_R_PWR_CLK_STATE, GEN8_R_PWR_CLK_STATE,
  				rpcs_config);
+		ctx->update_render_config = 0;

In that case would need to do ctx->load_type = ctx->pending_load_type here.

Regards,

Tvrtko

  	}
/* True 32b PPGTT with dynamic page allocation: update PDP

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux