Re: [v8 2/2] drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 02, 2018 at 12:03:12AM +0530, Uma Shankar wrote:
> Plane input CSC needs to be enabled to convert frambuffers from
> YUV to RGB. This is needed for bottom 3 planes on ICL, rest of
> the planes have hardcoded conversion and taken care by the legacy
> code.
> 
> This patch defines the co-efficient values for YUV to RGB conversion
> in BT709 and BT601 formats. It programs the coefficients and enables
> the plane input csc unit in hardware.
> 
> This has been verified and tested by Maarten and the change is working
> as expecpted.
> 
> v2: Addressed Maarten's and Ville's review comments and added the
> coefficients in a 2D array instead of independent Macros.
> 
> v3: Added individual coefficient matrix (9 values) instead of 6
> register values as per Maarten's comment. Also addresed a shift
> issue with B channel coefficient.
> 
> v4: Added support for Limited Range Color Handling
> 
> v5: Fixed Matt and Maarten's review comments.
> 
> v6: Added human readable matrix values for YUV to RGB Conversion along
> with just the bspec register values, as per Matt's suggestion.
> 
> v7: Refactored the code, move csc coefficient programming function to
> intel_sprite.c and made it static as per Ville's review comment.
> 
> v8: Addressed Ville's review comment. Called the coefficient programming
> from within the skl_program_plane and used I915_WRITE_FW instead of
> I915_WRITE.
> 
> Signed-off-by: Uma Shankar <uma.shankar@xxxxxxxxx>
> Reviewed-by: Matt Roper <matthew.d.roper@xxxxxxxxx>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> 
> ---
>  drivers/gpu/drm/i915/intel_display.c |  17 ++++--
>  drivers/gpu/drm/i915/intel_sprite.c  | 108 +++++++++++++++++++++++++++++++++++
>  2 files changed, 120 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index fe045ab..daec1fd 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -3666,6 +3666,7 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
>  	struct drm_i915_private *dev_priv =
>  		to_i915(plane_state->base.plane->dev);
>  	const struct drm_framebuffer *fb = plane_state->base.fb;
> +	struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
>  	u32 plane_color_ctl = 0;
>  
>  	if (INTEL_GEN(dev_priv) < 11) {
> @@ -3675,14 +3676,20 @@ u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
>  	plane_color_ctl |= PLANE_COLOR_PLANE_GAMMA_DISABLE;
>  	plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);
>  
> -	if (fb->format->is_yuv) {
> -		if (plane_state->base.color_encoding == DRM_COLOR_YCBCR_BT709)
> -			plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
> +	if (fb->format->is_yuv && !icl_is_hdr_plane(plane)) {
> +		if (plane_state->base.color_encoding ==
> +				DRM_COLOR_YCBCR_BT709)
> +			plane_color_ctl |=
> +				PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
>  		else
> -			plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
> +			plane_color_ctl |=
> +				PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
>  
>  		if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> -			plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
> +			plane_color_ctl |=
> +			PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;

These formatting changes to the SDR plane path don't seem to belong
in this patch. Just adds noise making it hard to see what is actually
changed.

> +	} else if (fb->format->is_yuv) {
> +		plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
>  	}
>  
>  	return plane_color_ctl;
> diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
> index c604f6b..0b9cf29 100644
> --- a/drivers/gpu/drm/i915/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/intel_sprite.c
> @@ -40,6 +40,7 @@
>  #include "intel_frontbuffer.h"
>  #include <drm/i915_drm.h>
>  #include "i915_drv.h"
> +#include <drm/drm_color_mgmt.h>
>  
>  int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
>  			     int usecs)
> @@ -361,6 +362,109 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state)
>  		      ((crtc_w + 1) << 16)|(crtc_h + 1));
>  }
>  
> +/* Preoffset values for YUV to RGB Conversion */
> +#define PREOFF_YUV_TO_RGB_HI		0x1800
> +#define PREOFF_YUV_TO_RGB_ME		0x1F00
> +#define PREOFF_YUV_TO_RGB_LO		0x1800
> +
> +#define  ROFF(x)          (((x) & 0xffff) << 16)
> +#define  GOFF(x)          (((x) & 0xffff) << 0)
> +#define  BOFF(x)          (((x) & 0xffff) << 16)
> +
> +static void
> +icl_program_input_csc_coeff(const struct intel_crtc_state *crtc_state,
> +			    const struct intel_plane_state *plane_state)
> +{
> +	struct drm_i915_private *dev_priv =
> +		to_i915(plane_state->base.plane->dev);
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
> +	enum pipe pipe = crtc->pipe;
> +	struct intel_plane *intel_plane =
> +		to_intel_plane(plane_state->base.plane);

s/intel_plane/plane/

> +	enum plane_id plane = intel_plane->id;

s/plane/plane_id/

I am trying to make the driver use consistnet names for things.
Let's not go against that process when adding new code.

> +
> +	static const u16 input_csc_matrix[][9] = {
> +		/*
> +		 * BT.601 full range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.000, 0.000, 1.371,
> +		 *  1.000, -0.336, -0.698,
> +		 *  1.000, 1.732, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT601] = {
> +			0x7AF8, 0x7800, 0x0,
> +			0x8B28, 0x7800, 0x9AC0,
> +			0x0, 0x7800, 0x7DD8,
> +		},
> +		/*
> +		 * BT.709 full range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.000, 0.000, 1.574,
> +		 *  1.000, -0.187, -0.468,
> +		 *  1.000, 1.855, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT709] = {
> +			0x7C98, 0x7800, 0x0,
> +			0x9EF8, 0x7800, 0xABF8,
> +			0x0, 0x7800,  0x7ED8,
> +		},
> +	};
> +
> +	/* Matrix for Limited Range to Full Range Conversion */
> +	static const u16 input_csc_matrix_lr[][9] = {
> +		/*
> +		 * BT.601 Limted range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.164384, 0.000, 1.596370,
> +		 *  1.138393, -0.382500, -0.794598,
> +		 *  1.138393, 1.971696, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT601] = {
> +			0x7CC8, 0x7950, 0x0,
> +			0x8CB8, 0x7918, 0x9C40,
> +			0x0, 0x7918, 0x7FC8,
> +		},
> +		/*
> +		 * BT.709 Limited range YCbCr -> full range RGB
> +		 * The matrix required is :
> +		 * [1.164, 0.000, 1.833671,
> +		 *  1.138393, -0.213249, -0.532909,
> +		 *  1.138393, 2.112402, 0.0000]
> +		 */
> +		[DRM_COLOR_YCBCR_BT709] = {
> +			0x7EA8, 0x7950, 0x0,
> +			0x8888, 0x7918, 0xADA8,
> +			0x0, 0x7918,  0x6870,
> +		},
> +	};
> +	const u16 *csc;
> +
> +	if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
> +		csc = input_csc_matrix[plane_state->base.color_encoding];
> +	else
> +		csc = input_csc_matrix_lr[plane_state->base.color_encoding];
> +
> +	I915_WRITE_FW(PLANE_INPUT_CSC_COEFF(pipe, plane, 0), ROFF(csc[0]) |
> +		   GOFF(csc[1]));

Some alignment issues here. I guess missing a reindent after
adding the _FW().

> +	I915_WRITE_FW(PLANE_INPUT_CSC_COEFF(pipe, plane, 1), BOFF(csc[2]));
> +	I915_WRITE_FW(PLANE_INPUT_CSC_COEFF(pipe, plane, 2), ROFF(csc[3]) |
> +		   GOFF(csc[4]));
> +	I915_WRITE_FW(PLANE_INPUT_CSC_COEFF(pipe, plane, 3), BOFF(csc[5]));
> +	I915_WRITE_FW(PLANE_INPUT_CSC_COEFF(pipe, plane, 4), ROFF(csc[6]) |
> +		   GOFF(csc[7]));
> +	I915_WRITE_FW(PLANE_INPUT_CSC_COEFF(pipe, plane, 5), BOFF(csc[8]));
> +
> +	I915_WRITE_FW(PLANE_INPUT_CSC_PREOFF(pipe, plane, 0),
> +		   PREOFF_YUV_TO_RGB_HI);
> +	I915_WRITE_FW(PLANE_INPUT_CSC_PREOFF(pipe, plane, 1),
> +		   PREOFF_YUV_TO_RGB_ME);
> +	I915_WRITE_FW(PLANE_INPUT_CSC_PREOFF(pipe, plane, 2),
> +		   PREOFF_YUV_TO_RGB_LO);
> +	I915_WRITE_FW(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 0), 0x0);
> +	I915_WRITE_FW(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 1), 0x0);
> +	I915_WRITE_FW(PLANE_INPUT_CSC_POSTOFF(pipe, plane, 2), 0x0);
> +}
> +
>  static void
>  skl_program_plane(struct intel_plane *plane,
>  		  const struct intel_crtc_state *crtc_state,
> @@ -381,6 +485,7 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state)
>  	uint32_t src_w = drm_rect_width(&plane_state->base.src) >> 16;
>  	uint32_t src_h = drm_rect_height(&plane_state->base.src) >> 16;
>  	struct intel_plane *linked = plane_state->linked_plane;
> +	const struct drm_framebuffer *fb = plane_state->base.fb;
>  	unsigned long irqflags;
>  	u32 keymsk = 0, keymax = 0;
>  
> @@ -394,6 +499,9 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state)
>  		I915_WRITE_FW(PLANE_COLOR_CTL(pipe, plane_id),
>  			      plane_state->color_ctl);
>  
> +	if (fb->format->is_yuv && icl_is_hdr_plane(plane))
> +		icl_program_input_csc_coeff(crtc_state, plane_state);
> +
>  	if (key->flags) {
>  		I915_WRITE_FW(PLANE_KEYVAL(pipe, plane_id), key->min_value);
>  
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux