On Thu, 2018-10-18 at 15:16 -0700, Manasi Navare wrote:
> In case of Legacy DP connector on TypeC port, the
> flex IO DPMLE register is set to number of lanes configured
> by the display driver which will be programmed into DDI_BUF_CTL
> PORT_WIDTH_SELECTION.
> This needs to be programmed before enabling the shared PLLs hence
> add a pre_pll_enable hook for ICL and add this programming in that
> hook.
>
> Cc: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> Cc: Jose Roberto de Souza <jose.souza@xxxxxxxxx>
> Cc: Animesh Manna <animesh.manna@xxxxxxxxx>
> Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_ddi.c | 52
> ++++++++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> b/drivers/gpu/drm/i915/intel_ddi.c
> index 6b9742baa5f2..fd84f88753cb 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -3311,6 +3311,56 @@ static void bxt_ddi_pre_pll_enable(struct
> intel_encoder *encoder,
> bxt_ddi_phy_set_lane_optim_mask(encoder, mask);
> }
>
> +static void intel_ddi_set_fia_lane_count(struct intel_encoder
> *encoder,
> + const struct intel_crtc_state
> *pipe_config,
> + enum port port)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder-
> >base);
> + enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
> + u32 val = I915_READ(PORT_TX_DFLEXDPMLE1);
> + bool lane_reversal = (dig_port->tc_type == TC_PORT_TYPEC) ?
> false :
> + dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
I guess this is more easy to read:
bool lane_reversal = dig_port->tc_type == TC_PORT_TYPEC && dig_port-
>saved_port_bits & DDI_BUF_PORT_REVERSAL;
> +
> + val &= ~DFLEXDPMLE1_DPMLETC_MASK(tc_port);
> + switch (pipe_config->lane_count) {
> + case 1:
> + val |= (lane_reversal) ?
> DFLEXDPMLE1_DPMLETC_ML3(tc_port) :
> + DFLEXDPMLE1_DPMLETC_ML0(tc_port);
For me the DFLEXDPMLE1_DPMLETC_ML0(tc_port); should be align with '('
but if bot said that it is okay...
> + break;
> + case 2:
> + val |= (lane_reversal) ?
> DFLEXDPMLE1_DPMLETC_ML3_2(tc_port) :
> + DFLEXDPMLE1_DPMLETC_ML1_0(tc_port);
> + break;
> + case 4:
> + val |= DFLEXDPMLE1_DPMLETC_ML_3_0(tc_port);
> + break;
> + default:
> + MISSING_CASE(pipe_config->lane_count);
> + }
> + I915_WRITE(PORT_TX_DFLEXDPMLE1, val);
> +}
> +
> +static void icl_ddi_pre_pll_enable(struct intel_encoder *encoder,
> + const struct intel_crtc_state
> *pipe_config,
> + const struct drm_connector_state
> *conn_state)
> +{
> + enum port port = encoder->port;
> + struct intel_digital_port *dig_port = enc_to_dig_port(&encoder-
> >base);
> +
> + if (intel_port_is_combophy(to_i915(encoder->base.dev), port))
> + return;
Combophy ports will have dig_port->tc_type == TC_PORT_UNKNOWN so you
can drop this.
With this change:
Reviewed-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> +
> + /*
> + * Program the lane count for static/dynamic connections on
> Type-C ports.
> + * Skip this step for TBT.
> + */
> + if (dig_port->tc_type == TC_PORT_TBT)
> + return;
> +
> + intel_ddi_set_fia_lane_count(encoder, pipe_config, port);
> +}
> +
> void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
> {
> struct intel_digital_port *intel_dig_port =
> dp_to_dig_port(intel_dp);
> @@ -3828,6 +3878,8 @@ void intel_ddi_init(struct drm_i915_private
> *dev_priv, enum port port)
> intel_encoder->enable = intel_enable_ddi;
> if (IS_GEN9_LP(dev_priv))
> intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
> + if (IS_ICELAKE(dev_priv))
> + intel_encoder->pre_pll_enable = icl_ddi_pre_pll_enable;
> intel_encoder->pre_enable = intel_ddi_pre_enable;
> intel_encoder->disable = intel_disable_ddi;
> intel_encoder->post_disable = intel_ddi_post_disable;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
