On Wed, Oct 17, 2018 at 04:10:34PM -0700, clinton.a.taylor@xxxxxxxxx wrote: > From: Clint Taylor <clinton.a.taylor@xxxxxxxxx> > > HDMI 2.0 monitors may not support SCDC and still be able to accept VICs > above 63. Use multiple EDID capbilities to determine if the SINK is > actually an HDMI 2.0 device. The QD980B HDMI 2.0 Analyzer generates unique > EDIDs during CTS tests that don't contain a HDMI Forum VSDB if the block is > not used during the test. The current HDMI AVI infoframe code only uses the > SCDC supported information in the HDMI Forum VSDB to determine if the sink > is HDMI 2.0. This patch adds checks for YCbCr420 Deep Color, YCbCR420 VDB, > YCBCR420 CMDB capabilities, and pipe is YCbCr420 to the existing SCDC > supported check to Infer SINK is HDMI 2.0. > > HDMI 2.0 CTS HF1-51 test fails on the QD980B. > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107894 > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> > Cc: Shashank Sharma <shashank.sharma@xxxxxxxxx> > > Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx> > --- > drivers/gpu/drm/i915/intel_hdmi.c | 32 +++++++++++++++++++++++++++++++- > 1 file changed, 31 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c > index 2c53efc..6913806 100644 > --- a/drivers/gpu/drm/i915/intel_hdmi.c > +++ b/drivers/gpu/drm/i915/intel_hdmi.c > @@ -458,6 +458,34 @@ static void intel_write_infoframe(struct intel_encoder *encoder, > frame->any.type, buffer, len); > } > > +static bool is_hdmi2(const struct drm_connector *connector, > + const struct intel_crtc_state *crtc_state) > +{ > + bool hdmi2 = false; > + bool vdb_mode = false; > + bool cmdb_mode = false; > + int i = 0; > + > + /* check VDB bits for HDMI 2.0 mode */ > + for (i = 0; i < BITS_TO_LONGS(128); i++) > + if (connector->display_info.hdmi.y420_vdb_modes[i]) > + vdb_mode = true; > + > + /* check CMDB bits for HDMI 2.0 mode */ > + for (i = 0; i < BITS_TO_LONGS(128); i++) > + if (connector->display_info.hdmi.y420_cmdb_modes[i]) > + cmdb_mode = true; > + > + if (connector->display_info.hdmi.scdc.supported || > + connector->display_info.hdmi.y420_dc_modes || > + crtc_state->ycbcr420 || vdb_mode || cmdb_mode) { I think we can replace all this 4:2:0 related stuff with just a display_info->color_formats & DRM_COLOR_FORMAT_YCRCB420 check. > + DRM_DEBUG_KMS("Inferred HDMI2 sink present\n"); > + hdmi2 = true; > + } > + > + return hdmi2; > +} > + > static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder, > const struct intel_crtc_state *crtc_state, > const struct drm_connector_state *conn_state) > @@ -466,10 +494,12 @@ static void intel_hdmi_set_avi_infoframe(struct intel_encoder *encoder, > const struct drm_display_mode *adjusted_mode = > &crtc_state->base.adjusted_mode; > struct drm_connector *connector = &intel_hdmi->attached_connector->base; > - bool is_hdmi2_sink = connector->display_info.hdmi.scdc.supported; > + bool is_hdmi2_sink = false; > union hdmi_infoframe frame; > int ret; > > + is_hdmi2_sink = is_hdmi2(connector, crtc_state); > + > ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, > adjusted_mode, > is_hdmi2_sink); > -- > 1.9.1 -- Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
