On 10/15/2018 7:57 PM, Jani Nikula wrote:
intel_dsi_vbt_init() has grown too unwieldy, and it's about to be
modified due to ICL DSI. Abstract out the VLV specific dphy param
init. No functional changes. Intentionally no stylistic changes during
code movement.
Cc: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Looks ok to me,
Reviewed-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
Regards,
Madhav
---
drivers/gpu/drm/i915/intel_dsi_vbt.c | 147 +++++++++++++++++++----------------
1 file changed, 78 insertions(+), 69 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dsi_vbt.c b/drivers/gpu/drm/i915/intel_dsi_vbt.c
index 6c4cc92f5947..fdeba8386d53 100644
--- a/drivers/gpu/drm/i915/intel_dsi_vbt.c
+++ b/drivers/gpu/drm/i915/intel_dsi_vbt.c
@@ -499,13 +499,11 @@ int intel_dsi_vbt_get_modes(struct intel_dsi *intel_dsi)
return 1;
}
-bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
+static void vlv_dphy_param_init(struct intel_dsi *intel_dsi)
{
struct drm_device *dev = intel_dsi->base.base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
- struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
- struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
u32 tlpx_ns, extra_byte_count, tlpx_ui;
u32 ui_num, ui_den;
u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
@@ -513,72 +511,6 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
u32 tclk_prepare_clkzero, ths_prepare_hszero;
u32 lp_to_hs_switch, hs_to_lp_switch;
u32 mul;
- u16 burst_mode_ratio;
- enum port port;
-
- DRM_DEBUG_KMS("\n");
-
- intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
- intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
- intel_dsi->lane_count = mipi_config->lane_cnt + 1;
- intel_dsi->pixel_format =
- pixel_format_from_register_bits(
- mipi_config->videomode_color_format << 7);
-
- intel_dsi->dual_link = mipi_config->dual_link;
- intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
- intel_dsi->operation_mode = mipi_config->is_cmd_mode;
- intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
- intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
- intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
- intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
- intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
- intel_dsi->init_count = mipi_config->master_init_timer;
- intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
- intel_dsi->video_frmt_cfg_bits =
- mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
-
- /* Starting point, adjusted depending on dual link and burst mode */
- intel_dsi->pclk = mode->clock;
-
- /* In dual link mode each port needs half of pixel clock */
- if (intel_dsi->dual_link) {
- intel_dsi->pclk /= 2;
-
- /* we can enable pixel_overlap if needed by panel. In this
- * case we need to increase the pixelclock for extra pixels
- */
- if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
- intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
- }
- }
-
- /* Burst Mode Ratio
- * Target ddr frequency from VBT / non burst ddr freq
- * multiply by 100 to preserve remainder
- */
- if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
- if (mipi_config->target_burst_mode_freq) {
- u32 bitrate = intel_dsi_bitrate(intel_dsi);
-
- if (mipi_config->target_burst_mode_freq < bitrate) {
- DRM_ERROR("Burst mode freq is less than computed\n");
- return false;
- }
-
- burst_mode_ratio = DIV_ROUND_UP(
- mipi_config->target_burst_mode_freq * 100,
- bitrate);
-
- intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
- } else {
- DRM_ERROR("Burst mode target is not set\n");
- return false;
- }
- } else
- burst_mode_ratio = 100;
-
- intel_dsi->burst_mode_ratio = burst_mode_ratio;
switch (intel_dsi->escape_clk_div) {
case 0:
@@ -738,6 +670,83 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
DIV_ROUND_UP(2 * tlpx_ui + trail_cnt * 2 + 8,
8);
intel_dsi->clk_hs_to_lp_count += extra_byte_count;
+}
+
+bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
+{
+ struct drm_device *dev = intel_dsi->base.base.dev;
+ struct drm_i915_private *dev_priv = to_i915(dev);
+ struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
+ struct mipi_pps_data *pps = dev_priv->vbt.dsi.pps;
+ struct drm_display_mode *mode = dev_priv->vbt.lfp_lvds_vbt_mode;
+ u16 burst_mode_ratio;
+ enum port port;
+
+ DRM_DEBUG_KMS("\n");
+
+ intel_dsi->eotp_pkt = mipi_config->eot_pkt_disabled ? 0 : 1;
+ intel_dsi->clock_stop = mipi_config->enable_clk_stop ? 1 : 0;
+ intel_dsi->lane_count = mipi_config->lane_cnt + 1;
+ intel_dsi->pixel_format =
+ pixel_format_from_register_bits(
+ mipi_config->videomode_color_format << 7);
+
+ intel_dsi->dual_link = mipi_config->dual_link;
+ intel_dsi->pixel_overlap = mipi_config->pixel_overlap;
+ intel_dsi->operation_mode = mipi_config->is_cmd_mode;
+ intel_dsi->video_mode_format = mipi_config->video_transfer_mode;
+ intel_dsi->escape_clk_div = mipi_config->byte_clk_sel;
+ intel_dsi->lp_rx_timeout = mipi_config->lp_rx_timeout;
+ intel_dsi->turn_arnd_val = mipi_config->turn_around_timeout;
+ intel_dsi->rst_timer_val = mipi_config->device_reset_timer;
+ intel_dsi->init_count = mipi_config->master_init_timer;
+ intel_dsi->bw_timer = mipi_config->dbi_bw_timer;
+ intel_dsi->video_frmt_cfg_bits =
+ mipi_config->bta_enabled ? DISABLE_VIDEO_BTA : 0;
+
+ /* Starting point, adjusted depending on dual link and burst mode */
+ intel_dsi->pclk = mode->clock;
+
+ /* In dual link mode each port needs half of pixel clock */
+ if (intel_dsi->dual_link) {
+ intel_dsi->pclk /= 2;
+
+ /* we can enable pixel_overlap if needed by panel. In this
+ * case we need to increase the pixelclock for extra pixels
+ */
+ if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
+ intel_dsi->pclk += DIV_ROUND_UP(mode->vtotal * intel_dsi->pixel_overlap * 60, 1000);
+ }
+ }
+
+ /* Burst Mode Ratio
+ * Target ddr frequency from VBT / non burst ddr freq
+ * multiply by 100 to preserve remainder
+ */
+ if (intel_dsi->video_mode_format == VIDEO_MODE_BURST) {
+ if (mipi_config->target_burst_mode_freq) {
+ u32 bitrate = intel_dsi_bitrate(intel_dsi);
+
+ if (mipi_config->target_burst_mode_freq < bitrate) {
+ DRM_ERROR("Burst mode freq is less than computed\n");
+ return false;
+ }
+
+ burst_mode_ratio = DIV_ROUND_UP(
+ mipi_config->target_burst_mode_freq * 100,
+ bitrate);
+
+ intel_dsi->pclk = DIV_ROUND_UP(intel_dsi->pclk * burst_mode_ratio, 100);
+ } else {
+ DRM_ERROR("Burst mode target is not set\n");
+ return false;
+ }
+ } else
+ burst_mode_ratio = 100;
+
+ intel_dsi->burst_mode_ratio = burst_mode_ratio;
+
+ vlv_dphy_param_init(intel_dsi);
DRM_DEBUG_KMS("Pclk %d\n", intel_dsi->pclk);
DRM_DEBUG_KMS("Pixel overlap %d\n", intel_dsi->pixel_overlap);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
