Re: [PATCH v4 3/5] drm/i915: Leave intel_conn->mst_port set, use mst_port_gone instead

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 04, 2018 at 08:29:52PM -0400, Lyude Paul wrote:
> Currently we set intel_connector->mst_port to NULL to signify that the
> MST port has been removed from the system so that we can prevent further
> action on the port such as connector probes, mode probing, etc.
> However, we're going to need access to intel_connector->mst_port in
> order to fixup ->best_encoder() so that it can always return the correct
> encoder for an MST port to prevent legacy DPMS prop changes from
> failing. This should be safe, so instead keep intel_connector->mst_port
> always set and instead add intel_connector->mst_port_gone in order to
> signify whether or not the connector has disappeared from the system.
> 
> Changes since v2:
> - Add a comment to mst_port_gone (Jani Nikula)
> - Change mst_port_gone to a u8 instead of a bool, per the kernel bot.
>   Apparently bool is discouraged in structs these days
> 
> Signed-off-by: Lyude Paul <lyude@xxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> ---
>  drivers/gpu/drm/i915/intel_dp_mst.c | 14 +++++++-------
>  drivers/gpu/drm/i915/intel_drv.h    |  6 ++++++
>  2 files changed, 13 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
> index 4ecd65375603..fcb9b87b9339 100644
> --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> @@ -311,9 +311,8 @@ static int intel_dp_mst_get_ddc_modes(struct drm_connector *connector)
>  	struct edid *edid;
>  	int ret;
>  
> -	if (!intel_dp) {
> +	if (intel_connector->mst_port_gone)

Just use the same READ_ONCE(conn->registered) trick as in the core? Imo no
need to track this twice ...

>  		return intel_connector_update_modes(connector, NULL);
> -	}
>  
>  	edid = drm_dp_mst_get_edid(connector, &intel_dp->mst_mgr, intel_connector->port);
>  	ret = intel_connector_update_modes(connector, edid);
> @@ -328,9 +327,10 @@ intel_dp_mst_detect(struct drm_connector *connector, bool force)
>  	struct intel_connector *intel_connector = to_intel_connector(connector);
>  	struct intel_dp *intel_dp = intel_connector->mst_port;
>  
> -	if (!intel_dp)
> +	if (intel_connector->mst_port_gone)
>  		return connector_status_disconnected;
> -	return drm_dp_mst_detect_port(connector, &intel_dp->mst_mgr, intel_connector->port);
> +	return drm_dp_mst_detect_port(connector, &intel_dp->mst_mgr,
> +				      intel_connector->port);
>  }
>  
>  static void
> @@ -370,7 +370,7 @@ intel_dp_mst_mode_valid(struct drm_connector *connector,
>  	int bpp = 24; /* MST uses fixed bpp */
>  	int max_rate, mode_rate, max_lanes, max_link_clock;
>  
> -	if (!intel_dp)
> +	if (intel_connector->mst_port_gone)
>  		return MODE_ERROR;

I think if we've move the conn->registered check into drm_probe_helper.c
we could drop all these checks here too. And fixup nouveau/amdgpu while at
it - trying to get modes for a disconnected mst sink is somewhat silly :-)

>From a functional pov the patch lgtm. With mst_port_gone removed and the
READ_ON(!conn->registered) trick everywhere instead this has my

Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>

Cheers, Daniel

>  
>  	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
> @@ -402,7 +402,7 @@ static struct drm_encoder *intel_mst_atomic_best_encoder(struct drm_connector *c
>  	struct intel_dp *intel_dp = intel_connector->mst_port;
>  	struct intel_crtc *crtc = to_intel_crtc(state->crtc);
>  
> -	if (!intel_dp)
> +	if (intel_connector->mst_port_gone)
>  		return NULL;
>  	return &intel_dp->mst_encoders[crtc->pipe]->base.base;
>  }
> @@ -514,7 +514,7 @@ static void intel_dp_destroy_mst_connector(struct drm_dp_mst_topology_mgr *mgr,
>  						   connector);
>  	/* prevent race with the check in ->detect */
>  	drm_modeset_lock(&connector->dev->mode_config.connection_mutex, NULL);
> -	intel_connector->mst_port = NULL;
> +	intel_connector->mst_port_gone = true;
>  	drm_modeset_unlock(&connector->dev->mode_config.connection_mutex);
>  
>  	drm_connector_put(connector);
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 8fc61e96754f..8261d4579452 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -410,6 +410,12 @@ struct intel_connector {
>  
>  	struct intel_dp *mst_port;
>  
> +	/*
> +	 * Set to 1 if this is an MST connector that was removed from the
> +	 * system and unregistered from sysfs
> +	 */
> +	u8 mst_port_gone;
-Daniel
> +
>  	/* Work struct to schedule a uevent on link train failure */
>  	struct work_struct modeset_retry_work;
>  
> -- 
> 2.17.1
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux