Well except the destroy helper, which isn't really a primary helper
but generally useful, if mislabelled.
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxxx>
---
drivers/gpu/drm/drm_plane_helper.c | 85 ++++--------------------------
include/drm/drm_plane_helper.h | 10 ----
2 files changed, 11 insertions(+), 84 deletions(-)
diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
index 33b3e6892787..0fff72dcd06d 100644
--- a/drivers/gpu/drm/drm_plane_helper.c
+++ b/drivers/gpu/drm/drm_plane_helper.c
@@ -42,11 +42,8 @@
* primary plane support on top of the normal CRTC configuration interface.
* Since the legacy &drm_mode_config_funcs.set_config interface ties the primary
* plane together with the CRTC state this does not allow userspace to disable
- * the primary plane itself. To avoid too much duplicated code use
- * drm_plane_helper_check_update() which can be used to enforce the same
- * restrictions as primary planes had thus. The default primary plane only
- * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached
- * framebuffer.
+ * the primary plane itself. The default primary plane only expose XRBG8888 and
+ * ARGB8888 as valid pixel formats for the attached framebuffer.
*
* Drivers are highly recommended to implement proper support for primary
* planes, and newly merged drivers must not rely upon these transitional
@@ -148,50 +145,13 @@ static int drm_plane_helper_check_update(struct drm_plane *plane,
return 0;
}
-/**
- * drm_primary_helper_update() - Helper for primary plane update
- * @plane: plane object to update
- * @crtc: owning CRTC of owning plane
- * @fb: framebuffer to flip onto plane
- * @crtc_x: x offset of primary plane on crtc
- * @crtc_y: y offset of primary plane on crtc
- * @crtc_w: width of primary plane rectangle on crtc
- * @crtc_h: height of primary plane rectangle on crtc
- * @src_x: x offset of @fb for panning
- * @src_y: y offset of @fb for panning
- * @src_w: width of source rectangle in @fb
- * @src_h: height of source rectangle in @fb
- * @ctx: lock acquire context, not used here
- *
- * Provides a default plane update handler for primary planes. This is handler
- * is called in response to a userspace SetPlane operation on the plane with a
- * non-NULL framebuffer. We call the driver's modeset handler to update the
- * framebuffer.
- *
- * SetPlane() on a primary plane of a disabled CRTC is not supported, and will
- * return an error.
- *
- * Note that we make some assumptions about hardware limitations that may not be
- * true for all hardware --
- *
- * 1. Primary plane cannot be repositioned.
- * 2. Primary plane cannot be scaled.
- * 3. Primary plane must cover the entire CRTC.
- * 4. Subpixel positioning is not supported.
- *
- * Drivers for hardware that don't have these restrictions can provide their
- * own implementation rather than using this helper.
- *
- * RETURNS:
- * Zero on success, error code on failure
- */
-int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h,
- struct drm_modeset_acquire_ctx *ctx)
+static int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h,
+ struct drm_modeset_acquire_ctx *ctx)
{
struct drm_mode_set set = {
.crtc = crtc,
@@ -258,35 +218,12 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
kfree(connector_list);
return ret;
}
-EXPORT_SYMBOL(drm_primary_helper_update);
-/**
- * drm_primary_helper_disable() - Helper for primary plane disable
- * @plane: plane to disable
- * @ctx: lock acquire context, not used here
- *
- * Provides a default plane disable handler for primary planes. This is handler
- * is called in response to a userspace SetPlane operation on the plane with a
- * NULL framebuffer parameter. It unconditionally fails the disable call with
- * -EINVAL the only way to disable the primary plane without driver support is
- * to disable the entire CRTC. Which does not match the plane
- * &drm_plane_funcs.disable_plane hook.
- *
- * Note that some hardware may be able to disable the primary plane without
- * disabling the whole CRTC. Drivers for such hardware should provide their
- * own disable handler that disables just the primary plane (and they'll likely
- * need to provide their own update handler as well to properly re-enable a
- * disabled primary plane).
- *
- * RETURNS:
- * Unconditionally returns -EINVAL.
- */
-int drm_primary_helper_disable(struct drm_plane *plane,
- struct drm_modeset_acquire_ctx *ctx)
+static int drm_primary_helper_disable(struct drm_plane *plane,
+ struct drm_modeset_acquire_ctx *ctx)
{
return -EINVAL;
}
-EXPORT_SYMBOL(drm_primary_helper_disable);
/**
* drm_primary_helper_destroy() - Helper for primary plane destruction
diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
index 7bff930b8b10..331ebd60b3a3 100644
--- a/include/drm/drm_plane_helper.h
+++ b/include/drm/drm_plane_helper.h
@@ -38,16 +38,6 @@
*/
#define DRM_PLANE_HELPER_NO_SCALING (1<<16)
-int drm_primary_helper_update(struct drm_plane *plane,
- struct drm_crtc *crtc,
- struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h,
- struct drm_modeset_acquire_ctx *ctx);
-int drm_primary_helper_disable(struct drm_plane *plane,
- struct drm_modeset_acquire_ctx *ctx);
void drm_primary_helper_destroy(struct drm_plane *plane);
extern const struct drm_plane_funcs drm_primary_helper_funcs;
--
2.19.0.rc2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
