On Tue, 2018-09-25 at 15:17 +0300, Ville Syrjälä wrote:
> On Mon, Sep 24, 2018 at 06:16:49PM -0700, José Roberto de Souza
> wrote:
> > For ICL type-c ports there is a aux power restriction, it can only
> > be
> > enabled while there is sink connected.
>
> That can't be entirely true because it's super racy. I was talking
> with Imre about this mess at some point, and IIRC we came up with
> some half decent theories on how we might handle this mess in a
> sane manner. IIRC it was something along the lines of: the tbt vs.
> other mode knob defines which power well we can enable, and so
> while we're doing something with the port in one mode or the other
> we must not try to use the port in the other mode. Ie. we need to
> properly track which mode the port is in and if there's an event
> that requires switching modes we have to wait until the previous
> use of the other mode has stopped.
I can't think how would we use the same TBT3 port in TBT3 and USB-C
mode without going to the disconnection and connection flow.
This statment about aux power restriction is on BSec also in the past
we were having some timeouts warnings while waiting for USB-C/TBT aux
power wells to be turn or off, Imre fixed that by not adding
POWER_DOMAIN_INIT to those power well domains.
>
> >
> > BSpec: 21750
> >
> > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
> > Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 19 ++++++++++++++-----
> > 1 file changed, 14 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c
> > b/drivers/gpu/drm/i915/intel_dp.c
> > index 6b4c19123f2a..48fd38cd4ba4 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -5019,19 +5019,27 @@ intel_dp_long_pulse(struct intel_connector
> > *connector,
> > struct intel_dp *intel_dp = intel_attached_dp(&connector-
> > >base);
> > enum drm_connector_status status;
> > u8 sink_irq_vector = 0;
> > + bool got_aux_power;
> >
> > WARN_ON(!drm_modeset_is_locked(&dev_priv-
> > >drm.mode_config.connection_mutex));
> >
> > + /* Can't disconnect eDP */
> > + if (!intel_dp_is_edp(intel_dp) &&
> > + !intel_digital_port_connected(&dp_to_dig_port(intel_dp)-
> > >base)) {
> > + status = connector_status_disconnected;
> > + got_aux_power = false;
> > + goto port_disconnected;
> > + }
> > +
> > intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> > + got_aux_power = true;
> >
> > - /* Can't disconnect eDP */
> > if (intel_dp_is_edp(intel_dp))
> > status = edp_detect(intel_dp);
> > - else if
> > (intel_digital_port_connected(&dp_to_dig_port(intel_dp)->base))
> > - status = intel_dp_detect_dpcd(intel_dp);
> > else
> > - status = connector_status_disconnected;
> > + status = intel_dp_detect_dpcd(intel_dp);
> >
> > +port_disconnected:
> > if (status == connector_status_disconnected) {
> > memset(&intel_dp->compliance, 0, sizeof(intel_dp-
> > >compliance));
> >
> > @@ -5122,7 +5130,8 @@ intel_dp_long_pulse(struct intel_connector
> > *connector,
> > if (status != connector_status_connected && !intel_dp->is_mst)
> > intel_dp_unset_edid(intel_dp);
> >
> > - intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> > + if (got_aux_power)
> > + intel_display_power_put(dev_priv, intel_dp-
> > >aux_power_domain);
> > return status;
> > }
> >
> > --
> > 2.19.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
