On Thu, 2018-09-20 at 13:43 -0700, José Roberto de Souza wrote:
> For PSR2 we don't have the option to keep main link enabled while
> PSR2 is active, so don't configure sink DPCD with a wrong value.
Is this what the DP spec says or an Intel HW restriction?
-DK
>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>s
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_psr.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_psr.c
> b/drivers/gpu/drm/i915/intel_psr.c
> index cf9d6e965697..60cf6fd251d0 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -344,12 +344,13 @@ static void intel_psr_enable_sink(struct
> intel_dp *intel_dp)
> drm_dp_dpcd_writeb(&intel_dp->aux,
> DP_RECEIVER_ALPM_CONFIG,
> DP_ALPM_ENABLE);
> dpcd_val |= DP_PSR_ENABLE_PSR2 |
> DP_PSR_IRQ_HPD_WITH_CRC_ERRORS;
> + } else {
> + if (dev_priv->psr.link_standby)
> + dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
> + if (INTEL_GEN(dev_priv) >= 8)
> + dpcd_val |= DP_PSR_CRC_VERIFICATION;
> }
>
> - if (dev_priv->psr.link_standby)
> - dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
> - if (!dev_priv->psr.psr2_enabled && INTEL_GEN(dev_priv) >= 8)
> - dpcd_val |= DP_PSR_CRC_VERIFICATION;
> drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
>
> drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER,
> DP_SET_POWER_D0);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
