I'm glad that it is working for you now! Yes, the drm-intel-next-queued has all the interlaced patches that were in remotes/origin/interlaced. I don't think your tv doesn't report the interlaced modes, but the modes it reports are the CEA modes we aren't supporting yet. It is on my todo list take a carefully look at this modes. Cheers, Rodrigo. On Mon, Feb 13, 2012 at 6:44 PM, Atechsystem <Atechsystem at freenet.de> wrote: > > Hello, > >> Von: Paulo Zanoni [mailto:przanoni at gmail.com] Maybe the best tree to >>test is this: >>http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=drm-intel-next-queued > > Thanks, compiling from this repro solved my problem. With my TV I have to > use the xorg modeline, without it I can't select the interlaced modes. If I > use my NEC monitor I can select the I modeline by using the lxde monitor > setting tool. I think my TV don't report the I modelines. > > Thanks for this patch > > Regards > Atech > > -----Urspr?ngliche Nachricht----- > Von: intel-gfx-bounces+atechsystem=freenet.de at lists.freedesktop.org > [mailto:intel-gfx-bounces+atechsystem=freenet.de at lists.freedesktop.org] Im > Auftrag von Atechsystem > Gesendet: Montag, 13. Februar 2012 20:05 > An: 'Paulo Zanoni' > Cc: intel-gfx at lists.freedesktop.org > Betreff: Re: Interlaced mode on intel Clarkdale only colored > stripes > >> Von: Paulo Zanoni [mailto:przanoni at gmail.com] Maybe the best tree to >>test is this: >>http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=drm-intel-next-que >>ued > > I will compile it now. Before I used the drm-intel-next branch. I downloaded > the latest tar.gz file and didn't use git to checkout the branch. > >>Rodrigo Vivi [mailto:rodrigo.vivi at gmail.com] The git repo is right, but >>are you sure you are using the > remotes/origin/interlaced branch? >>It is strange that you couldn't see any interlace mode without using >>the > handmade modeline. > > No chance to select it directly. I 've no clue to select it by standard lxde > dialog. > > -----Urspr?ngliche Nachricht----- > Von: Paulo Zanoni [mailto:przanoni at gmail.com] > Gesendet: Montag, 13. Februar 2012 19:56 > An: Atechsystem > Cc: Intel Graphics Development > Betreff: Re: Interlaced mode on intel Clarkdale only colored > stripes > > 2012/2/13 Atechsystem <Atechsystem at freenet.de>: >> I compiled it from here: git://people.freedesktop.org/~danvet/drm > > Did you change to the "interlaced" branch? > > Maybe the best tree to test is this: > http://cgit.freedesktop.org/~danvet/drm-intel/log/?h=drm-intel-next-queued > > (repository is drm-intel and branch is drm-intel-next-queued). > >> I added for example: >> Modeline ? ?"1920x1080 at 50i" ? ? 74.25 1920 2448 2492 2640 1080 1084 >> 1094 >> 1124 interlace +hsync +vsync >> >> Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, >> 30Hz, 25Hz and 24Hz. > > This should not be needed. If you have the correct branch, you don't need > any configuration tweak: just boot the machine, plug a monitor that supports > interlaced modes, and "xrandr --verbose" will show you some interlaced > modes. > > Please confirm that you are using the correct branch first. Use "git log" or > "git branch" commands to check. > > > -- > Paulo Zanoni > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Rodrigo Vivi Blog: http://blog.vivi.eng.br GPG: 0x905BE242 @ wwwkeys.pgp.net
