The git repo is right, but are you sure you are using the remotes/origin/interlaced branch? It is strange that you couldn't see any interlace mode without using the handmade modeline. On Mon, Feb 13, 2012 at 4:44 PM, Atechsystem <Atechsystem at freenet.de> wrote: > > > -----Urspr?ngliche Nachricht----- > Von: Atechsystem [mailto:Atechsystem at freenet.de] > Gesendet: Montag, 13. Februar 2012 19:44 > An: 'Paulo Zanoni' > Betreff: AW: Interlaced mode on intel Clarkdale only colored > stripes > > Hi, > > thanks for your quick reply. > >>Paulo Zanoni [mailto:przanoni at gmail.com] Which git repo and which >>branch exactly? You may have a repo without the patches that fix interlaced > modes. > > I compiled it from here: git://people.freedesktop.org/~danvet/drm > >>Which line did you add to xorg.conf? What exactly did you do in this >>step? Please try to remove every xorg configuration file and test again >>with the default configuration > > I added for example: > Modeline ? ?"1920x1080 at 50i" ? ? 74.25 1920 2448 2492 2640 1080 1084 1094 > 1124 interlace +hsync +vsync > > Without a modeline I can't select interlace modes. Only 60Hz, 50Hz, 30Hz, > 25Hz and 24Hz. > >>Please attach the TV, then run "xrandr --verbose" and send us the output. > Please also send the output of intel_reg_dumper: >>http://intellinuxgraphics.org/intel_reg_dumper.html > > Please find files attached. > > -----Urspr?ngliche Nachricht----- > Von: Paulo Zanoni [mailto:przanoni at gmail.com] > Gesendet: Montag, 13. Februar 2012 18:58 > An: Atechsystem > Cc: daniel at ffwll.ch; intel-gfx at lists.freedesktop.org > Betreff: Re: Interlaced mode on intel Clarkdale only colored > stripes > > Hi > > 2012/2/13 Atechsystem <Atechsystem at freenet.de>: >> I compiled the kernel from your git repro to test interlaced output >> with my Clarkdale (H55) Chipset. > > Which git repo and which branch exactly? You may have a repo without the > patches that fix interlaced modes. > >> After installing and reboot I put the interlaced line to my xorg.conf >> and activate them (first by xorg.conf and after that by lxdm >> resolution set tool). > > Which line did you add to xorg.conf? What exactly did you do in this step? > Please try to remove every xorg configuration file and test again with the > default configuration > >> >> I only get a screen full of colored stripes after switching from >> progressive to interlaced mode. ?My? TV shows 1080i as input mode. >> After that I read all mode lines from my TV by using the xorg server >> log and tried every interlaced modeline I found but always the same >> striped screen. To get sure that I use correct modelines I checked >> them with an plugged in card from another brand and it works immediately. > > Please attach the TV, then run "xrandr --verbose" and send us the output. > Please also send the output of intel_reg_dumper: > http://intellinuxgraphics.org/intel_reg_dumper.html > > -- > Paulo Zanoni > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx at lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx > -- Rodrigo Vivi Blog: http://blog.vivi.eng.br GPG: 0x905BE242 @ wwwkeys.pgp.net
