This patch programs maximum size of the payload transmitted
from peripheral back to the host processor using short packet
as a part of panel programming.
v2: Rebase
Signed-off-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
---
drivers/gpu/drm/i915/icl_dsi.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/drivers/gpu/drm/i915/icl_dsi.c b/drivers/gpu/drm/i915/icl_dsi.c
index ae8877a..a243349 100644
--- a/drivers/gpu/drm/i915/icl_dsi.c
+++ b/drivers/gpu/drm/i915/icl_dsi.c
@@ -25,6 +25,7 @@
* Jani Nikula <jani.nikula@xxxxxxxxx>
*/
+#include <drm/drm_mipi_dsi.h>
#include "intel_dsi.h"
static enum transcoder dsi_port_to_transcoder(enum port port)
@@ -640,6 +641,30 @@ static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
gen11_dsi_configure_transcoder(encoder, pipe_config);
}
+static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+ struct mipi_dsi_device *dsi;
+ enum port port;
+ enum transcoder dsi_trans;
+ u32 tmp;
+ int ret;
+
+ /* set maximum return packet size */
+ for_each_dsi_port(port, intel_dsi->ports) {
+ dsi_trans = dsi_port_to_transcoder(port);
+ tmp = I915_READ(DSI_CMD_RXCTL(dsi_trans));
+ tmp &= NUMBER_RX_PLOAD_DW_MASK;
+ /* multiply "Number Rx Payload DW" by 4 to get max value */
+ tmp = tmp * 4;
+ dsi = intel_dsi->dsi_hosts[port]->device;
+ ret = mipi_dsi_set_maximum_return_packet_size(dsi, tmp);
+ if (ret < 0)
+ DRM_ERROR("error setting max return pkt size%d\n", tmp);
+ }
+}
+
static void __attribute__((unused))
gen11_dsi_pre_enable(struct intel_encoder *encoder,
const struct intel_crtc_state *pipe_config,
@@ -654,6 +679,9 @@ gen11_dsi_pre_enable(struct intel_encoder *encoder,
/* step4: enable DSI port and DPHY */
gen11_dsi_enable_port_and_phy(encoder, pipe_config);
+ /* step5: program and powerup panel */
+ gen11_dsi_powerup_panel(encoder);
+
/* step6c: configure transcoder timings */
gen11_dsi_set_transcoder_timings(encoder, pipe_config);
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
