From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
The display engine stride limits are getting in our way. On SKL+
we are limited to 8k pixels, which is easily exceeded with three
4k displays. To overcome this limitation we can remap the pages
in the GTT to provide the display engine with a view of memory
with a smaller stride.
The code is mostly already there as We already play tricks with
the plane surface address and x/y offsets.
A few caveats apply:
* linear buffers need the fb stride to be page aligned, as
otherwise the remapped lines wouldn't start at the same
spot
* compressed buffers can't be remapped due to the new
ccs hash mode causing the virtual address of the pages
to affect the interpretation of the compressed data. IIRC
the old hash was limited to the low 12 bits so if we were
using that mode we could remap. As it stands we just refuse
to remapp with compressed fbs.
* no remapping gen2/3 as we'd need a fence for the remapped
vma, which we currently don't have. Need to deal with the
fence POT requirements, and do something about the gen2
gtt page size vs tile size difference
v2: Reabase due to is_ccs_modifier()
Fix up the skl+ stride_mult mess
memset() the gtt_view because otherwise we could leave
junk in plane[1] when going from 2 plane to 1 plane format
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 372 ++++++++++++++++++++++++++++-------
1 file changed, 301 insertions(+), 71 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 21aa0c0321b6..93b0de594c5d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1924,7 +1924,7 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
switch (fb->modifier) {
case DRM_FORMAT_MOD_LINEAR:
- return cpp;
+ return intel_tile_size(dev_priv);
case I915_FORMAT_MOD_X_TILED:
if (IS_GEN2(dev_priv))
return 128;
@@ -1967,11 +1967,8 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
static unsigned int
intel_tile_height(const struct drm_framebuffer *fb, int color_plane)
{
- if (fb->modifier == DRM_FORMAT_MOD_LINEAR)
- return 1;
- else
- return intel_tile_size(to_i915(fb->dev)) /
- intel_tile_width_bytes(fb, color_plane);
+ return intel_tile_size(to_i915(fb->dev)) /
+ intel_tile_width_bytes(fb, color_plane);
}
/* Return the tile dimensions in pixel units */
@@ -2226,16 +2223,8 @@ void intel_add_fb_offsets(int *x, int *y,
int color_plane)
{
- const struct intel_framebuffer *intel_fb = to_intel_framebuffer(state->base.fb);
- unsigned int rotation = state->base.rotation;
-
- if (drm_rotation_90_or_270(rotation)) {
- *x += intel_fb->rotated[color_plane].x;
- *y += intel_fb->rotated[color_plane].y;
- } else {
- *x += intel_fb->normal[color_plane].x;
- *y += intel_fb->normal[color_plane].y;
- }
+ *x += state->color_plane[color_plane].x;
+ *y += state->color_plane[color_plane].y;
}
static u32 intel_adjust_tile_offset(int *x, int *y,
@@ -2495,6 +2484,105 @@ bool is_ccs_modifier(u64 modifier)
modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
}
+static
+u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
+ u32 pixel_format, u64 modifier)
+{
+ struct intel_crtc *crtc;
+ struct intel_plane *plane;
+
+ /*
+ * We assume the primary plane for pipe A has
+ * the highest stride limits of them all.
+ */
+ crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_A);
+ plane = to_intel_plane(crtc->base.primary);
+
+ return plane->max_stride(plane, pixel_format, modifier,
+ DRM_MODE_ROTATE_0);
+}
+
+static
+u32 intel_fb_max_stride(struct drm_i915_private *dev_priv,
+ u32 pixel_format, u64 modifier)
+{
+ return intel_plane_fb_max_stride(dev_priv, pixel_format, modifier);
+}
+
+static u32
+intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)
+{
+ struct drm_i915_private *dev_priv = to_i915(fb->dev);
+
+ if (fb->modifier == DRM_FORMAT_MOD_LINEAR) {
+ u32 max_stride = intel_plane_fb_max_stride(dev_priv,
+ fb->format->format,
+ fb->modifier);
+
+ /*
+ * To make remapping with linear generally feasible
+ * we need the stride to be page aligned.
+ */
+ if (fb->pitches[color_plane] > max_stride)
+ return intel_tile_size(dev_priv);
+ else
+ return 64;
+ } else {
+ return intel_tile_width_bytes(fb, color_plane);
+ }
+}
+
+static int
+intel_plane_check_stride(const struct intel_plane_state *plane_state)
+{
+ struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
+ const struct drm_framebuffer *fb = plane_state->base.fb;
+ unsigned int rotation = plane_state->base.rotation;
+ u32 stride, max_stride;
+
+ /* FIXME other color planes? */
+ stride = plane_state->color_plane[0].stride;
+ max_stride = plane->max_stride(plane, fb->format->format,
+ fb->modifier, rotation);
+
+ if (stride > max_stride) {
+ DRM_DEBUG_KMS("[FB:%d] stride (%d) exceeds [PLANE:%d:%s] max stride (%d)\n",
+ fb->base.id, stride,
+ plane->base.base.id, plane->base.name, max_stride);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state)
+{
+ struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
+ struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
+ const struct drm_framebuffer *fb = plane_state->base.fb;
+ unsigned int rotation = plane_state->base.rotation;
+ u32 stride, max_stride;
+
+ /* We don't want to deal with remapping with cursors */
+ if (plane->id == PLANE_CURSOR)
+ return false;
+
+ /* No fence for the remapped vma */
+ if (INTEL_GEN(dev_priv) < 4)
+ return false;
+
+ /* New CCS hash mode makes remapping impossible */
+ if (is_ccs_modifier(fb->modifier))
+ return false;
+
+ /* FIXME other color planes? */
+ stride = intel_fb_pitch(fb, 0, rotation);
+ max_stride = plane->max_stride(plane, fb->format->format,
+ fb->modifier, rotation);
+
+ return stride > max_stride;
+}
+
static int
intel_fill_fb_info(struct drm_i915_private *dev_priv,
struct drm_framebuffer *fb)
@@ -2660,6 +2748,182 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,
return 0;
}
+static void
+intel_plane_remap_gtt(struct intel_plane_state *plane_state)
+{
+ struct drm_i915_private *dev_priv =
+ to_i915(plane_state->base.plane->dev);
+ struct drm_framebuffer *fb = plane_state->base.fb;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct intel_rotation_info *info = &plane_state->view.rotated;
+ unsigned int rotation = plane_state->base.rotation;
+ int i, num_planes = fb->format->num_planes;
+ unsigned int tile_size = intel_tile_size(dev_priv);
+ unsigned int tile_width, tile_height;
+ unsigned int aligned_x, aligned_y;
+ unsigned int aligned_w, aligned_h;
+ unsigned int src_x, src_y;
+ unsigned int src_w, src_h;
+ unsigned int x, y;
+ u32 gtt_offset = 0;
+
+ memset(&plane_state->view, 0, sizeof(plane_state->view));
+ plane_state->view.type = drm_rotation_90_or_270(rotation) ?
+ I915_GGTT_VIEW_ROTATED : I915_GGTT_VIEW_REMAPPED;
+
+ src_x = plane_state->base.src.x1 >> 16;
+ src_y = plane_state->base.src.y1 >> 16;
+ src_w = drm_rect_width(&plane_state->base.src) >> 16;
+ src_h = drm_rect_height(&plane_state->base.src) >> 16;
+
+ WARN_ON(is_ccs_modifier(fb->modifier));
+
+ /* Align our viewport start to tile boundary */
+ intel_tile_dims(fb, 0, &tile_width, &tile_height);
+
+ x = src_x & (tile_width - 1);
+ y = src_y & (tile_height - 1);
+
+ aligned_x = src_x - x;
+ aligned_y = src_y - y;
+
+ aligned_w = x + src_w;
+ aligned_h = y + src_h;
+
+ /* Make src coordinates relative to the aligned viewport */
+ drm_rect_translate(&plane_state->base.src,
+ -(aligned_x << 16), -(aligned_y << 16));
+
+ /* Rotate src coordinates to match rotated GTT view */
+ if (drm_rotation_90_or_270(rotation))
+ drm_rect_rotate(&plane_state->base.src,
+ aligned_w << 16, aligned_h << 16,
+ DRM_MODE_ROTATE_270);
+
+ for (i = 0; i < num_planes; i++) {
+ unsigned int hsub = i ? fb->format->hsub : 1;
+ unsigned int vsub = i ? fb->format->vsub : 1;
+ unsigned int cpp = fb->format->cpp[i];
+ unsigned int width, height;
+ unsigned int pitch_tiles;
+ unsigned int x, y;
+ u32 offset;
+
+ intel_tile_dims(fb, i, &tile_width, &tile_height);
+
+ x = aligned_x / hsub;
+ y = aligned_y / vsub;
+ width = aligned_w / hsub;
+ height = aligned_h / vsub;
+
+ /*
+ * First pixel of the aligned src viewport
+ * from the start of the normal gtt mapping.
+ */
+ x += intel_fb->normal[i].x;
+ y += intel_fb->normal[i].y;
+
+ offset = intel_compute_aligned_offset(dev_priv, &x, &y,
+ fb, i, fb->pitches[i],
+ DRM_MODE_ROTATE_0, tile_size);
+ offset /= tile_size;
+
+ info->plane[i].offset = offset;
+ info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i],
+ tile_width * cpp);
+ info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
+ info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
+
+ if (drm_rotation_90_or_270(rotation)) {
+ struct drm_rect r;
+
+ /* rotate the x/y offsets to match the GTT view */
+ r.x1 = x;
+ r.y1 = y;
+ r.x2 = x + width;
+ r.y2 = y + height;
+ drm_rect_rotate(&r,
+ info->plane[i].width * tile_width,
+ info->plane[i].height * tile_height,
+ DRM_MODE_ROTATE_270);
+ x = r.x1;
+ y = r.y1;
+
+ pitch_tiles = info->plane[i].height;
+ plane_state->color_plane[i].stride = pitch_tiles * tile_height;
+
+ /* rotate the tile dimensions to match the GTT view */
+ swap(tile_width, tile_height);
+ } else {
+ pitch_tiles = info->plane[i].width;
+ plane_state->color_plane[i].stride = pitch_tiles * tile_width * cpp;
+ }
+
+ /*
+ * We only keep the x/y offsets, so push all of the
+ * gtt offset into the x/y offsets.
+ */
+ intel_adjust_tile_offset(&x, &y,
+ tile_width, tile_height,
+ tile_size, pitch_tiles,
+ gtt_offset * tile_size, 0);
+
+ gtt_offset += info->plane[i].width * info->plane[i].height;
+
+ plane_state->color_plane[i].offset = 0;
+ plane_state->color_plane[i].x = x;
+ plane_state->color_plane[i].y = y;
+ }
+}
+
+static int
+intel_plane_compute_gtt(struct intel_plane_state *plane_state)
+{
+ const struct intel_framebuffer *fb =
+ to_intel_framebuffer(plane_state->base.fb);
+ unsigned int rotation = plane_state->base.rotation;
+ int i, num_planes = fb->base.format->num_planes;
+ int ret;
+
+ if (intel_plane_needs_remap(plane_state)) {
+ intel_plane_remap_gtt(plane_state);
+
+ /* Remapping should take care of this always */
+ ret = intel_plane_check_stride(plane_state);
+ if (WARN_ON(ret))
+ return ret;
+
+ return 0;
+ }
+
+ intel_fill_fb_ggtt_view(&plane_state->view, &fb->base, rotation);
+
+ for (i = 0; i < num_planes; i++) {
+ plane_state->color_plane[i].stride = intel_fb_pitch(&fb->base, i, rotation);
+ plane_state->color_plane[i].offset = 0;
+
+ if (drm_rotation_90_or_270(rotation)) {
+ plane_state->color_plane[i].x = fb->rotated[i].x;
+ plane_state->color_plane[i].y = fb->rotated[i].y;
+ } else {
+ plane_state->color_plane[i].x = fb->normal[i].x;
+ plane_state->color_plane[i].y = fb->normal[i].y;
+ }
+ }
+
+ /* Rotate src coordinates to match rotated GTT view */
+ if (drm_rotation_90_or_270(rotation))
+ drm_rect_rotate(&plane_state->base.src,
+ fb->base.width << 16, fb->base.height << 16,
+ DRM_MODE_ROTATE_270);
+
+ ret = intel_plane_check_stride(plane_state);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int i9xx_format_to_fourcc(int format)
{
switch (format) {
@@ -3155,21 +3419,11 @@ static int skl_check_ccs_aux_surface(struct intel_plane_state *plane_state)
int skl_check_plane_surface(struct intel_plane_state *plane_state)
{
const struct drm_framebuffer *fb = plane_state->base.fb;
- unsigned int rotation = plane_state->base.rotation;
int ret;
- intel_fill_fb_ggtt_view(&plane_state->view, fb, rotation);
- plane_state->color_plane[0].stride = intel_fb_pitch(fb, 0, rotation);
- plane_state->color_plane[1].stride = intel_fb_pitch(fb, 1, rotation);
-
- if (!plane_state->base.visible)
- return 0;
-
- /* Rotate src coordinates to match rotated GTT view */
- if (drm_rotation_90_or_270(rotation))
- drm_rect_rotate(&plane_state->base.src,
- fb->width << 16, fb->height << 16,
- DRM_MODE_ROTATE_270);
+ ret = intel_plane_compute_gtt(plane_state);
+ if (ret)
+ return ret;
/*
* Handle the AUX surface first since
@@ -3292,14 +3546,16 @@ int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
{
struct drm_i915_private *dev_priv =
to_i915(plane_state->base.plane->dev);
- const struct drm_framebuffer *fb = plane_state->base.fb;
- unsigned int rotation = plane_state->base.rotation;
- int src_x = plane_state->base.src.x1 >> 16;
- int src_y = plane_state->base.src.y1 >> 16;
+ int src_x, src_y;
u32 offset;
+ int ret;
- intel_fill_fb_ggtt_view(&plane_state->view, fb, rotation);
- plane_state->color_plane[0].stride = intel_fb_pitch(fb, 0, rotation);
+ ret = intel_plane_compute_gtt(plane_state);
+ if (ret)
+ return ret;
+
+ src_x = plane_state->base.src.x1 >> 16;
+ src_y = plane_state->base.src.y1 >> 16;
intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
@@ -3311,6 +3567,7 @@ int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
/* HSW/BDW do this automagically in hardware */
if (!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)) {
+ unsigned int rotation = plane_state->base.rotation;
int src_w = drm_rect_width(&plane_state->base.src) >> 16;
int src_h = drm_rect_height(&plane_state->base.src) >> 16;
@@ -3478,15 +3735,6 @@ static bool i9xx_plane_get_hw_state(struct intel_plane *plane,
return ret;
}
-static u32
-intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)
-{
- if (fb->modifier == DRM_FORMAT_MOD_LINEAR)
- return 64;
- else
- return intel_tile_width_bytes(fb, color_plane);
-}
-
static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
{
struct drm_device *dev = intel_crtc->base.dev;
@@ -9698,13 +9946,13 @@ static bool intel_cursor_size_ok(const struct intel_plane_state *plane_state)
static int intel_cursor_check_surface(struct intel_plane_state *plane_state)
{
- const struct drm_framebuffer *fb = plane_state->base.fb;
- unsigned int rotation = plane_state->base.rotation;
int src_x, src_y;
u32 offset;
+ int ret;
- intel_fill_fb_ggtt_view(&plane_state->view, fb, rotation);
- plane_state->color_plane[0].stride = intel_fb_pitch(fb, 0, rotation);
+ ret = intel_plane_compute_gtt(plane_state);
+ if (ret)
+ return ret;
src_x = plane_state->base.src_x >> 16;
src_y = plane_state->base.src_y >> 16;
@@ -14431,24 +14679,6 @@ static const struct drm_framebuffer_funcs intel_fb_funcs = {
.dirty = intel_user_framebuffer_dirty,
};
-static
-u32 intel_fb_pitch_limit(struct drm_i915_private *dev_priv,
- uint64_t fb_modifier, uint32_t pixel_format)
-{
- struct intel_crtc *crtc;
- struct intel_plane *plane;
-
- /*
- * We assume the primary plane for pipe A has
- * the highest stride limits of them all.
- */
- crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_A);
- plane = to_intel_plane(crtc->base.primary);
-
- return plane->max_stride(plane, pixel_format, fb_modifier,
- DRM_MODE_ROTATE_0);
-}
-
static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
struct drm_i915_gem_object *obj,
struct drm_mode_fb_cmd2 *mode_cmd)
@@ -14456,7 +14686,7 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
struct drm_framebuffer *fb = &intel_fb->base;
struct drm_format_name_buf format_name;
- u32 pitch_limit;
+ u32 max_stride;
unsigned int tiling, stride;
int ret = -EINVAL;
int i;
@@ -14527,13 +14757,13 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
goto err;
}
- pitch_limit = intel_fb_pitch_limit(dev_priv, mode_cmd->modifier[0],
- mode_cmd->pixel_format);
- if (mode_cmd->pitches[0] > pitch_limit) {
+ max_stride = intel_fb_max_stride(dev_priv, mode_cmd->modifier[0],
+ mode_cmd->pixel_format);
+ if (mode_cmd->pitches[0] > max_stride) {
DRM_DEBUG_KMS("%s pitch (%u) must be at most %d\n",
mode_cmd->modifier[0] != DRM_FORMAT_MOD_LINEAR ?
"tiled" : "linear",
- mode_cmd->pitches[0], pitch_limit);
+ mode_cmd->pitches[0], max_stride);
goto err;
}
--
2.16.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
