Re: [PATCH] drm/i915/dp_mst: Fix enabling pipe clock for all streams

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday, September 4, 2018 5:54:16 AM PDT Imre Deak wrote:
> On Tue, Sep 04, 2018 at 03:08:16PM +0300, Jani Nikula wrote:
> > On Fri, 31 Aug 2018, Imre Deak <imre.deak@xxxxxxxxx> wrote:
> > > commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to
> > > encoders")
> > > inadvertently stopped enabling the pipe clock for any DP-MST stream
> > > after the first one. It also rearranged the pipe clock enabling wrt.
> > > initial MST payload allocation step (which may or may not be a
> > > problem, but it's contrary to the spec.).
> > > 
> > > Fix things by making the above commit truly a non-functional change.
> > 
> > What kind of MST setups do we have in CI? Why didn't they catch this?
> 
> What we'd need is a dock/other branch device with an DP-MST input and
> two outputs. That would exercise the case that broke here.
> 
I had the same question. We have  these two in CI, but both have only one 
external display attached.
fi-kbl-7560u	Dell XPS 13	Kaby Lake / i7-7560u / Iris Plus Graphics 640 GT3e	
eDP, DELL TB16->TB->DP-MST
fi-cfl-s3	Intel Coffee Lake-S RVP	Coffee Lake	eDP-PSR, DP-MST (HDMI)

Tomi,
Is it possible to have another external display connected to one of these?


> > BR,
> > Jani.
> > 
> > > Fixes: commit afb2c4437dae ("drm/i915/ddi: Push pipe clock enabling to
> > > encoders") Bugzilla:
> > > https://bugs.freedesktop.org/show_bug.cgi?id=107365
> > > Reported-by: Lyude Paul <lyude@xxxxxxxxxx>
> > > Reported-by: dmummenschanz@xxxxxx
> > > Tested-by: dmummenschanz@xxxxxx
> > > Cc: Lyude Paul <lyude@xxxxxxxxxx>
> > > Cc: dmummenschanz@xxxxxx
> > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > ---
> > > 
> > >  drivers/gpu/drm/i915/intel_ddi.c    | 17 +++++++++--------
> > >  drivers/gpu/drm/i915/intel_dp_mst.c |  4 ++++
> > >  2 files changed, 13 insertions(+), 8 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_ddi.c
> > > b/drivers/gpu/drm/i915/intel_ddi.c index f3b115ce4029..dcb1a98d624d
> > > 100644
> > > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > > @@ -2912,7 +2912,8 @@ static void intel_ddi_pre_enable_dp(struct
> > > intel_encoder *encoder,> > 
> > >  	icl_enable_phy_clock_gating(dig_port);
> > > 
> > > -	intel_ddi_enable_pipe_clock(crtc_state);
> > > +	if (!is_mst)
> > > +		intel_ddi_enable_pipe_clock(crtc_state);
> > > 
> > >  }
> > >  
> > >  static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
> > > 
> > > @@ -3015,14 +3016,14 @@ static void intel_ddi_post_disable_dp(struct
> > > intel_encoder *encoder,> > 
> > >  	bool is_mst = intel_crtc_has_type(old_crtc_state,
> > >  	
> > >  					  INTEL_OUTPUT_DP_MST);
> > > 
> > > -	intel_ddi_disable_pipe_clock(old_crtc_state);
> > > -
> > > -	/*
> > > -	 * Power down sink before disabling the port, otherwise we end
> > > -	 * up getting interrupts from the sink on detecting link loss.
> > > -	 */
> > > -	if (!is_mst)
> > > +	if (!is_mst) {
> > > +		intel_ddi_disable_pipe_clock(old_crtc_state);
> > > +		/*
> > > +		 * Power down sink before disabling the port, otherwise we end
> > > +		 * up getting interrupts from the sink on detecting link loss.
> > > +		 */
> > > 
> > >  		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
> > > 
> > > +	}
> > > 
> > >  	intel_disable_ddi_buf(encoder);
> > > 
> > > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > b/drivers/gpu/drm/i915/intel_dp_mst.c index 352e5216cc65..77920f1a3da1
> > > 100644
> > > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > > @@ -166,6 +166,8 @@ static void intel_mst_post_disable_dp(struct
> > > intel_encoder *encoder,> > 
> > >  	struct intel_connector *connector =
> > >  	
> > >  		to_intel_connector(old_conn_state->connector);
> > > 
> > > +	intel_ddi_disable_pipe_clock(old_crtc_state);
> > > +
> > > 
> > >  	/* this can fail */
> > >  	drm_dp_check_act_status(&intel_dp->mst_mgr);
> > >  	/* and this can also fail */
> > > 
> > > @@ -249,6 +251,8 @@ static void intel_mst_pre_enable_dp(struct
> > > intel_encoder *encoder,> > 
> > >  	I915_WRITE(DP_TP_STATUS(port), temp);
> > >  	
> > >  	ret = drm_dp_update_payload_part1(&intel_dp->mst_mgr);
> > > 
> > > +
> > > +	intel_ddi_enable_pipe_clock(pipe_config);
> > > 
> > >  }
> > >  
> > >  static void intel_mst_enable_dp(struct intel_encoder *encoder,
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx




_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux