On Fri, Aug 17, 2018 at 12:31:51PM -0700, Srivatsa, Anusha wrote:
> This patch needs to now incorporate the newly added slice_row_per_frame parameter in PPS_16.
Nope, the slice_row_per_frame and slice_per_line are only required to configure PPS
on the source side. They are not DSC spec related PPS parameters.
Manasi
>
> Anusha
>
> >-----Original Message-----
> >From: Navare, Manasi D
> >Sent: Tuesday, July 31, 2018 2:07 PM
> >To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> >Cc: Navare, Manasi D <manasi.d.navare@xxxxxxxxx>; Singh, Gaurav K
> ><gaurav.k.singh@xxxxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx; Jani Nikula
> ><jani.nikula@xxxxxxxxxxxxxxx>; Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>;
> >Srivatsa, Anusha <anusha.srivatsa@xxxxxxxxx>; Harry Wentland
> ><harry.wentland@xxxxxxx>
> >Subject: [PATCH v2 07/23] drm/dsc: Define Display Stream Compression PPS
> >infoframe
> >
> >This patch defines a new header file for all the DSC 1.2 structures and creates a
> >structure for PPS infoframe which will be used to send picture parameter set
> >secondary data packet for display stream compression.
> >All the PPS infoframe syntax elements are taken from DSC 1.2 specification from
> >VESA.
> >
> >Cc: Gaurav K Singh <gaurav.k.singh@xxxxxxxxx>
> >Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> >Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> >Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> >Cc: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> >Cc: Harry Wentland <harry.wentland@xxxxxxx>
> >Signed-off-by: Manasi Navare <manasi.d.navare@xxxxxxxxx>
> >---
> > include/drm/drm_dsc.h | 365
> >++++++++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 365 insertions(+)
> > create mode 100644 include/drm/drm_dsc.h
> >
> >diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h new file mode
> >100644 index 0000000..678e8e6
> >--- /dev/null
> >+++ b/include/drm/drm_dsc.h
> >@@ -0,0 +1,365 @@
> >+/*
> >+ * Copyright (C) 2018 Intel Corp.
> >+ *
> >+ * Permission is hereby granted, free of charge, to any person
> >+obtaining a
> >+ * copy of this software and associated documentation files (the
> >+"Software"),
> >+ * to deal in the Software without restriction, including without
> >+limitation
> >+ * the rights to use, copy, modify, merge, publish, distribute,
> >+sublicense,
> >+ * and/or sell copies of the Software, and to permit persons to whom
> >+the
> >+ * Software is furnished to do so, subject to the following conditions:
> >+ *
> >+ * The above copyright notice and this permission notice shall be
> >+included in
> >+ * all copies or substantial portions of the Software.
> >+ *
> >+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> >+EXPRESS OR
> >+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> >+MERCHANTABILITY,
> >+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> >EVENT
> >+SHALL
> >+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM,
> >+DAMAGES OR
> >+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
> >+OTHERWISE,
> >+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
> >USE
> >+OR
> >+ * OTHER DEALINGS IN THE SOFTWARE.
> >+ *
> >+ * Authors:
> >+ * Manasi Navare <manasi.d.navare@xxxxxxxxx> */
> >+
> >+#ifndef DRM_DSC_H_
> >+#define DRM_DSC_H_
> >+
> >+#include <drm/drm_dp_helper.h>
> >+
> >+/* VESA Display Stream Compression DSC 1.2 constants */
> >+#define DSC_NUM_BUF_RANGES 15
> >+
> >+/**
> >+ * struct picture_parameter_set - Represents 128 bytes of Picture
> >+Parameter Set
> >+ *
> >+ * The VESA DSC standard defines picture parameter set (PPS) which
> >+display
> >+ * stream compression encoders must communicate to decoders.
> >+ * The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The
> >+fields in
> >+ * this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2.
> >+ * The PPS fields that span over more than a byte should be stored in
> >+Big Endian
> >+ * format.
> >+ */
> >+struct picture_parameter_set {
> >+ /**
> >+ * @dsc_version:
> >+ * PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC
> >+ * PPS0[7:4] - dsc_version_major: Contains major version of DSC
> >+ */
> >+ u8 dsc_version;
> >+ /**
> >+ * @pps_identifier:
> >+ * PPS1[7:0] - Application specific identifier that can be
> >+ * used to differentiate between different PPS tables.
> >+ */
> >+ u8 pps_identifier;
> >+ /**
> >+ * @pps_reserved:
> >+ * PPS2[7:0]- RESERVED Byte
> >+ */
> >+ u8 pps_reserved;
> >+ /**
> >+ * @pps_3:
> >+ * PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to
> >+ * generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits,
> >+ * 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits,
> >+ * 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2.
> >+ * PPS3[7:4] - bits_per_component: Bits per component for the original
> >+ * pixels of the encoded picture.
> >+ * 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2)
> >+ * 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also
> >+ * allowed only when dsc_minor_version = 0x2)
> >+ */
> >+ u8 pps_3;
> >+ /**
> >+ * @pps_4:
> >+ * PPS4[1:0] -These are the most significant 2 bits of
> >+ * compressed BPP bits_per_pixel[9:0] syntax element.
> >+ * PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled
> >+ * PPS4[3] - simple_422: Indicates if decoder drops samples to
> >+ * reconstruct the 4:2:2 picture.
> >+ * PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is
> >+ * active.
> >+ * PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any
> >+ * groups in picture
> >+ * PPS4[7:6] - Reseved bits
> >+ */
> >+ u8 pps_4;
> >+ /**
> >+ * @bits_per_pixel_low:
> >+ * PPS5[7:0] - This indicates the lower significant 8 bits of
> >+ * the compressed BPP bits_per_pixel[9:0] element.
> >+ */
> >+ u8 bits_per_pixel_low;
> >+ /**
> >+ * @pic_height:
> >+ * PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows
> >+ * within the raster.
> >+ */
> >+ __be16 pic_height;
> >+ /**
> >+ * @pic_width:
> >+ * PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within
> >+ * the raster.
> >+ */
> >+ __be16 pic_width;
> >+ /**
> >+ * @slice_height:
> >+ * PPS10[7:0], PPS11[7:0] - Slice height in units of pixels.
> >+ */
> >+ __be16 slice_height;
> >+ /**
> >+ * @slice_width:
> >+ * PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels.
> >+ */
> >+ __be16 slice_width;
> >+ /**
> >+ * @chunk_size:
> >+ * PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks
> >+ * that are used for slice multiplexing.
> >+ */
> >+ __be16 chunk_size;
> >+ /**
> >+ * @initial_xmit_delay_high:
> >+ * PPS16[1:0] - Most Significant two bits of initial transmission delay.
> >+ * It specifies the number of pixel times that the encoder waits before
> >+ * transmitting data from its rate buffer.
> >+ * PPS16[7:2] - Reserved
> >+ */
> >+ u8 initial_xmit_delay_high;
> >+ /**
> >+ * @initial_xmit_delay_low:
> >+ * PPS17[7:0] - Least significant 8 bits of initial transmission delay.
> >+ */
> >+ u8 initial_xmit_delay_low;
> >+ /**
> >+ * @initial_dec_delay:
> >+ *
> >+ * PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number
> >+ * of pixel times that the decoder accumulates data in its rate buffer
> >+ * before starting to decode and output pixels.
> >+ */
> >+ __be16 initial_dec_delay;
> >+ /**
> >+ * @pps20_reserved:
> >+ *
> >+ * PPS20[7:0] - Reserved
> >+ */
> >+ u8 pps20_reserved;
> >+ /**
> >+ * @initial_scale_value:
> >+ * PPS21[5:0] - Initial rcXformScale factor used at beginning
> >+ * of a slice.
> >+ * PPS21[7:6] - Reserved
> >+ */
> >+ u8 initial_scale_value;
> >+ /**
> >+ * @scale_increment_interval:
> >+ * PPS22[7:0], PPS23[7:0] - Number of group times between incrementing
> >+ * the rcXformScale factor at end of a slice.
> >+ */
> >+ __be16 scale_increment_interval;
> >+ /**
> >+ * @scale_decrement_interval_high:
> >+ * PPS24[3:0] - Higher 4 bits indicating number of group times between
> >+ * decrementing the rcXformScale factor at beginning of a slice.
> >+ * PPS24[7:4] - Reserved
> >+ */
> >+ u8 scale_decrement_interval_high;
> >+ /**
> >+ * @scale_decrement_interval_low:
> >+ * PPS25[7:0] - Lower 8 bits of scale decrement interval
> >+ */
> >+ u8 scale_decrement_interval_low;
> >+ /**
> >+ * @pps26_reserved:
> >+ * PPS26[7:0]
> >+ */
> >+ u8 pps26_reserved;
> >+ /**
> >+ * @first_line_bpg_offset:
> >+ * PPS27[4:0] - Number of additional bits that are allocated
> >+ * for each group on first line of a slice.
> >+ * PPS27[7:5] - Reserved
> >+ */
> >+ u8 first_line_bpg_offset;
> >+ /**
> >+ * @nfl_bpg_offset:
> >+ * PPS28[7:0], PPS29[7:0] - Number of bits including frac bits
> >+ * deallocated for each group for groups after the first line of slice.
> >+ */
> >+ __be16 nfl_bpg_offset;
> >+ /**
> >+ * @slice_bpg_offset:
> >+ * PPS30, PPS31[7:0] - Number of bits that are deallocated for each
> >+ * group to enforce the slice constraint.
> >+ */
> >+ __be16 slice_bpg_offset;
> >+ /**
> >+ * @initial_offset:
> >+ * PPS32,33[7:0] - Initial value for rcXformOffset
> >+ */
> >+ __be16 initial_offset;
> >+ /**
> >+ * @final_offset:
> >+ * PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset
> >+ */
> >+ __be16 final_offset;
> >+ /**
> >+ * @flatness_min_qp:
> >+ * PPS36[4:0] - Minimum QP at which flatness is signaled and
> >+ * flatness QP adjustment is made.
> >+ * PPS36[7:5] - Reserved
> >+ */
> >+ u8 flatness_min_qp;
> >+ /**
> >+ * @flatness_max_qp:
> >+ * PPS37[4:0] - Max QP at which flatness is signalled and
> >+ * the flatness adjustment is made.
> >+ * PPS37[7:5] - Reserved
> >+ */
> >+ u8 flatness_max_qp;
> >+ /**
> >+ * @rc_model_size:
> >+ * PPS38,39[7:0] - Number of bits within RC Model.
> >+ */
> >+ __be16 rc_model_size;
> >+ /**
> >+ * @rc_edge_factor:
> >+ * PPS40[3:0] - Ratio of current activity vs, previous
> >+ * activity to determine presence of edge.
> >+ * PPS40[7:4] - Reserved
> >+ */
> >+ u8 rc_edge_factor;
> >+ /**
> >+ * @rc_quant_incr_limit0:
> >+ * PPS41[4:0] - QP threshold used in short term RC
> >+ * PPS41[7:5] - Reserved
> >+ */
> >+ u8 rc_quant_incr_limit0;
> >+ /**
> >+ * @rc_quant_incr_limit1:
> >+ * PPS42[4:0] - QP threshold used in short term RC
> >+ * PPS42[7:5] - Reserved
> >+ */
> >+ u8 rc_quant_incr_limit1;
> >+ /**
> >+ * @rc_tgt_offset:
> >+ * PPS43[3:0] - Lower end of the variability range around the target
> >+ * bits per group that is allowed by short term RC.
> >+ * PPS43[7:4]- Upper end of the variability range around the target
> >+ * bits per group that i allowed by short term rc.
> >+ */
> >+ u8 rc_tgt_offset;
> >+ /**
> >+ * @rc_buf_thresh:
> >+ * PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for
> >+ * the 15 ranges defined by 14 thresholds.
> >+ */
> >+ u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1];
> >+ /**
> >+ * @rc_range_parameters:
> >+ * PPS58[7:0] - PPS87[7:0]
> >+ * Parameters that correspond to each of the 15 ranges.
> >+ */
> >+ __be16 rc_range_parameters[DSC_NUM_BUF_RANGES];
> >+ /**
> >+ * @native_422_420:
> >+ * PPS88[0] - 0 = Native 4:2:2 not used
> >+ * 1 = Native 4:2:2 used
> >+ * PPS88[1] - 0 = Native 4:2:0 not use
> >+ * 1 = Native 4:2:0 used
> >+ * PPS88[7:2] - Reserved 6 bits
> >+ */
> >+ u8 native_422_420;
> >+ /**
> >+ * @second_line_bpg_offset:
> >+ * PPS89[4:0] - Additional bits/group budget for the
> >+ * second line of a slice in Native 4:2:0 mode.
> >+ * Set to 0 if DSC minor version is 1 or native420 is 0.
> >+ * PPS89[7:5] - Reserved
> >+ */
> >+ u8 second_line_bpg_offset;
> >+ /**
> >+ * @nsl_bpg_offset:
> >+ * PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated
> >+ * for each group that is not in the second line of a slice.
> >+ */
> >+ __be16 nsl_bpg_offset;
> >+ /**
> >+ * @second_line_offset_adj:
> >+ * PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second
> >+ * line in Native 4:2:0 mode.
> >+ */
> >+ __be16 second_line_offset_adj;
> >+ /**
> >+ * @pps_long_94_reserved:
> >+ * PPS 94, 95, 96, 97 - Reserved
> >+ */
> >+ u32 pps_long_94_reserved;
> >+ /**
> >+ * @pps_long_98_reserved:
> >+ * PPS 98, 99, 100, 101 - Reserved
> >+ */
> >+ u32 pps_long_98_reserved;
> >+ /**
> >+ * @pps_long_102_reserved:
> >+ * PPS 102, 103, 104, 105 - Reserved
> >+ */
> >+ u32 pps_long_102_reserved;
> >+ /**
> >+ * @pps_long_106_reserved:
> >+ * PPS 106, 107, 108, 109 - reserved
> >+ */
> >+ u32 pps_long_106_reserved;
> >+ /**
> >+ * @pps_long_110_reserved:
> >+ * PPS 110, 111, 112, 113 - reserved
> >+ */
> >+ u32 pps_long_110_reserved;
> >+ /**
> >+ * @pps_long_114_reserved:
> >+ * PPS 114 - 117 - reserved
> >+ */
> >+ u32 pps_long_114_reserved;
> >+ /**
> >+ * @pps_long_118_reserved:
> >+ * PPS 118 - 121 - reserved
> >+ */
> >+ u32 pps_long_118_reserved;
> >+ /**
> >+ * @pps_long_122_reserved:
> >+ * PPS 122- 125 - reserved
> >+ */
> >+ u32 pps_long_122_reserved;
> >+ /**
> >+ * @pps_short_126_reserved:
> >+ * PPS 126, 127 - reserved
> >+ */
> >+ __be16 pps_short_126_reserved;
> >+};
> >+
> >+/**
> >+ * struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture
> >+Parameter
> >+ * Set Metadata
> >+ *
> >+ * This structure represents the DSC PPS infoframe required to send the
> >+Picture
> >+ * Parameter Set metadata required before enabling VESA Display Stream
> >+ * Compression. This is based on the DP Secondary Data Packet structure
> >+and
> >+ * comprises of SDP Header as defined in drm_dp_helper.h and PPS payload.
> >+ *
> >+ * @pps_header:
> >+ *
> >+ * Header for PPS as per DP SDP header format
> >+ *
> >+ * @pps_payload:
> >+ *
> >+ * PPS payload fields as per DSC specification Table 4-1 */ struct
> >+drm_dsc_pps_infoframe {
> >+ struct dp_sdp_header pps_header;
> >+ struct picture_parameter_set pps_payload; } __packed;
> >+
> >+#endif /* _DRM_DSC_H_ */
> >--
> >2.7.4
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
