On Wed, Aug 01, 2018 at 05:30:49PM -0700, Paulo Zanoni wrote:
> Em Qua, 2018-08-01 às 17:07 -0700, Anusha Srivatsa escreveu:
> > Add Support to load DMC on Icelake.
> >
> > While at it, also add support to load the firmware
> > during system resume.
> >
> > v2: load firmware during system resume.(Imre)
>
> Just to make it clear: did we test this on actual machines before
> submitting or are we entirely relying on the CI results?
>
> I'm not sure the CI is running enough tests to validate this patch with
> confidence, we'll probably need to do some manual testing here.
At some point I believe it was agreed that CI would test this
and get the new firmware automatically from the cover-letter.
The problem is that I don't see any cover-letter so I'm afraid
it is not running with the new firmware.
Tomi?
Also I believe in case it has the cover letter it should run
the full CI on the machine or at least stash it and run on
the weekend or whenever we run the full on all machines and
then report back again. Possible?
Martin?
>
> >
> > Cc: Imre Deak <imre.deak@xxxxxxxxx>
> > Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_csr.c | 7 +++++++
> > drivers/gpu/drm/i915/intel_runtime_pm.c | 3 +++
> > 2 files changed, 10 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_csr.c
> > b/drivers/gpu/drm/i915/intel_csr.c
> > index cf9b600..393d419 100644
> > --- a/drivers/gpu/drm/i915/intel_csr.c
> > +++ b/drivers/gpu/drm/i915/intel_csr.c
> > @@ -34,6 +34,9 @@
> > * low-power state and comes back to normal.
> > */
> >
> > +#define I915_CSR_ICL "i915/icl_dmc_ver1_07.bin"
> > +#define ICL_CSR_VERSION_REQUIRED CSR_VERSION(1, 7)
> > +
> > #define I915_CSR_GLK "i915/glk_dmc_ver1_04.bin"
> > MODULE_FIRMWARE(I915_CSR_GLK);
> > #define GLK_CSR_VERSION_REQUIRED CSR_VERSION(1, 4)
> > @@ -301,6 +304,8 @@ static uint32_t *parse_csr_fw(struct
> > drm_i915_private *dev_priv,
> > if (csr->fw_path == i915_modparams.dmc_firmware_path) {
> > /* Bypass version check for firmware override. */
> > required_version = csr->version;
> > + } else if (IS_ICELAKE(dev_priv)) {
> > + required_version = ICL_CSR_VERSION_REQUIRED;
> > } else if (IS_CANNONLAKE(dev_priv)) {
> > required_version = CNL_CSR_VERSION_REQUIRED;
> > } else if (IS_GEMINILAKE(dev_priv)) {
> > @@ -458,6 +463,8 @@ void intel_csr_ucode_init(struct drm_i915_private
> > *dev_priv)
> >
> > if (i915_modparams.dmc_firmware_path)
> > csr->fw_path = i915_modparams.dmc_firmware_path;
> > + else if (IS_ICELAKE(dev_priv))
> > + csr->fw_path = I915_CSR_ICL;
> > else if (IS_CANNONLAKE(dev_priv))
> > csr->fw_path = I915_CSR_CNL;
> > else if (IS_GEMINILAKE(dev_priv))
> > diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index cf89141..77c0986 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -3372,6 +3372,9 @@ static void icl_display_core_init(struct
> > drm_i915_private *dev_priv,
> >
> > /* 7. Setup MBUS. */
> > icl_mbus_init(dev_priv);
> > +
> > + if (resume && dev_priv->csr.dmc_payload)
> > + intel_csr_load_program(dev_priv);
> > }
> >
> > static void icl_display_core_uninit(struct drm_i915_private
> > *dev_priv)
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
