On Mon, Jul 16, 2018 at 04:23:23PM -0700, Nathan Ciobanu wrote:
> On Mon, Jul 16, 2018 at 03:34:58PM -0700, Rodrigo Vivi wrote:
> > On Mon, Jul 16, 2018 at 11:14:45AM -0700, Nathan Ciobanu wrote:
> > > Limit the link training clock recovery loop to 10 failed attempts at
> > > LANEx_CR_DONE per DP 1.4 spec section 3.5.1.2.2.
> >
> > Thanks... so this made me look to DP 1.3 and DP 1.4 differences here.
> > Are we already addressing all new conditions?
> >
> > I wonder if that should be at drm level.
> >
> > I noticed that one difference, 100us wait difference is already
> > addressed there at drm level...
> >
> > > Some USB-C MST hubs
> > > cause us to get stuck in this loop indefinitely requesting
> > >
> > > voltage swing: 0, pre-emphasis level: 2
> > > voltage swing: 1, pre-emphasis level: 2
> > > voltage swing: 0, pre-emphasis level: 3
> > >
> > > over and over: max_vswing is never reached, drm_dp_clock_recovery_ok()
> > > never returns true and voltage_tries always gets reset to 1. The driver
> > > sends those values to the hub but the hub keeps requesting new values
> > > every time in the pattern shown above.
> > >
> > > Changes in v2:
> > > - updated commit message (DK, Manasi)
> > > - defined DP_DP14_MAX_CR_TRIES (Marc)
> > > - made the loop iterate for max 10 times (Rodrigo, Marc)
> > >
> > > Changes in v3:
> > > - changed error message to use DP_DP14_MAX_CR_TRIES
> > >
> > > Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@xxxxxxxxxxxxxxx>
> > > ---
> > > drivers/gpu/drm/i915/intel_dp_link_training.c | 7 +++++--
> > > include/drm/drm_dp_helper.h | 1 +
> > > 2 files changed, 6 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/intel_dp_link_training.c b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > > index 4da6e33c7fa1..4bfba65c431c 100644
> > > --- a/drivers/gpu/drm/i915/intel_dp_link_training.c
> > > +++ b/drivers/gpu/drm/i915/intel_dp_link_training.c
> > > @@ -129,7 +129,7 @@ static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp)
> > > intel_dp_link_training_clock_recovery(struct intel_dp *intel_dp)
> > > {
> > > uint8_t voltage;
> > > - int voltage_tries, max_vswing_tries;
> > > + int voltage_tries, max_vswing_tries, cr_tries;
> > > uint8_t link_config[2];
> > > uint8_t link_bw, rate_select;
> > >
> > > @@ -172,7 +172,7 @@ static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp)
> > >
> > > voltage_tries = 1;
> > > max_vswing_tries = 0;
> > > - for (;;) {
> > > + for (cr_tries = 0; cr_tries < DP_DP14_MAX_CR_TRIES; ++cr_tries) {
> >
> > I know that I was the on that asked you to make this global here,
> > but just now with better spec pointers and definition is that I noticed
> > that this is only for DP 1.4 spec while this code here runs for all
> > DP... So we need to change in a way that we check the spec version somehow...
> I think the bug is with this infinite loop which is at the mercy of an external device
> and in my case I have this MST hub which appears to be DP 1.2 that triggers the
> infinite loop case. We have to limit the number of iterations and
> DP 1.4 spec happened to fix this issue. I'm a newbie in this area but in this case
> shouldn't we apply the same counter to all <= "DP 1.4" devices?
ok, the infinite loop situation is really bad... but I don't believe
we are going with the right fix...
and a good indication is that your fix is for DP-1.4 while your bug is seeing on DP-1.2
>
> -Nathan
> >
> > and possibly at drm level?!
> >
> > > uint8_t link_status[DP_LINK_STATUS_SIZE];
> > >
> > > drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
> > > @@ -216,6 +216,9 @@ static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp)
> > > ++max_vswing_tries;
> > >
> > > }
> > > + DRM_ERROR("Failed clock recovery %d times, giving up!\n",
> > > + DP_DP14_MAX_CR_TRIES);
> > > + return false;
> > > }
> > >
> > > /*
> > > diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> > > index c01564991a9f..2303ad8ed24e 100644
> > > --- a/include/drm/drm_dp_helper.h
> > > +++ b/include/drm/drm_dp_helper.h
> > > @@ -820,6 +820,7 @@
> > >
> > > #define DP_DP13_DPCD_REV 0x2200
> > > #define DP_DP13_MAX_LINK_RATE 0x2201
> > > +#define DP_DP14_MAX_CR_TRIES 10
> > >
> > > #define DP_DPRX_FEATURE_ENUMERATION_LIST 0x2210 /* DP 1.3 */
> > > # define DP_GTC_CAP (1 << 0) /* DP 1.3 */
> > > --
> > > 1.9.1
> > >
> >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
