This register used to power down individual lanes for
DDI/DSI ports. Bitfields to power up/down various
combinations of lanes are also added in this patch.
v2: Review comments from Jani N
- Use override instead of "override" for bitfields
- Define mask for override bitfield
- Define PWR_DOWN_LN* macros shifted in place
Signed-off-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dfd603c..3fa8f02 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1704,6 +1704,26 @@ enum i915_power_well_id {
#define ICL_PORT_CL_DW5(port) _MMIO_PORT(port, _ICL_PORT_CL_DW5_A, \
_ICL_PORT_CL_DW5_B)
+#define _CNL_PORT_CL_DW10_A 0x162028
+#define _ICL_PORT_CL_DW10_B 0x6c028
+#define ICL_PORT_CL_DW10(port) _MMIO_PORT(port, \
+ _CNL_PORT_CL_DW10_A, \
+ _ICL_PORT_CL_DW10_B)
+#define PG_SEQ_DELAY_OVERRIDE_MASK (3 << 25)
+#define PG_SEQ_DELAY_OVERRIDE_SHIFT 25
+#define PG_SEQ_DELAY_OVERRIDE_ENABLE (1 << 24)
+#define PWR_UP_ALL_LANES (0x0 << 4)
+#define PWR_DOWN_LN_3_2_1 (0xe << 4)
+#define PWR_DOWN_LN_3_2 (0xc << 4)
+#define PWR_DOWN_LN_3 (0x8 << 4)
+#define PWR_DOWN_LN_2_1_0 (0x7 << 4)
+#define PWR_DOWN_LN_1_0 (0x3 << 4)
+#define PWR_DOWN_LN_1 (0x2 << 4)
+#define PWR_DOWN_LN_3_1 (0xa << 4)
+#define PWR_DOWN_LN_3_1_0 (0xb << 4)
+#define PWR_DOWN_LN_MASK (0xf0 << 4)
+#define PWR_DOWN_LN_SHIFT 4
+
#define _PORT_CL1CM_DW9_A 0x162024
#define _PORT_CL1CM_DW9_BC 0x6C024
#define IREF0RC_OFFSET_SHIFT 8
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
