On Fri, 15 Jun 2018, Madhav Chauhan <madhav.chauhan@xxxxxxxxx> wrote:
> To save power, unused lanes should be powered
> down using the bitfield of PORT_CL_DW10.
>
> Signed-off-by: Madhav Chauhan <madhav.chauhan@xxxxxxxxx>
> ---
> drivers/gpu/drm/i915/intel_dsi_new.c | 44 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi_new.c b/drivers/gpu/drm/i915/intel_dsi_new.c
> index 5ec4016..baaf46d 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_new.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_new.c
> @@ -74,6 +74,47 @@ static void gen11_dsi_enable_io_power(struct intel_encoder *encoder)
> intel_display_power_get(dev_priv, POWER_DOMAIN_PORT_DDI_B_IO);
> }
>
> +static void gen11_dsi_power_up_lanes(struct intel_encoder *encoder)
> +{
> + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
> + enum port port;
> + u32 tmp;
> + u32 lane_mask;
> +
> + switch (intel_dsi->lane_count) {
> + case 1:
> + lane_mask = PWR_DOWN_LN_3_1_0;
> + break;
> + case 2:
> + lane_mask = PWR_DOWN_LN_3_1;
> + break;
> + case 3:
> + lane_mask = PWR_DOWN_LN_3;
> + break;
> + case 4:
> + lane_mask = PWR_UP_ALL_LANES;
> + break;
> + default:
> + lane_mask = PWR_UP_ALL_LANES;
> + break;
> + }
Like I suggested in previous patch, this can be simplified considerably
if you change the macros for the lane power up/down.
BR,
Jani.
> +
> + lane_mask = lane_mask << PWR_DOWN_LN_SHIFT;
> +
> + for_each_dsi_port(port, intel_dsi->ports) {
> + tmp = I915_READ(ICL_PORT_CL_DW10(port));
> + tmp &= ~PWR_DOWN_LN_MASK;
> + I915_WRITE(ICL_PORT_CL_DW10(port), tmp | lane_mask);
> + }
> +}
> +
> +static void gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder)
> +{
> + /* step 4a: power up all lanes of the DDI used by DSI */
> + gen11_dsi_power_up_lanes(encoder);
> +}
> +
> static void __attribute__((unused)) gen11_dsi_pre_enable(
> struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config,
> @@ -84,4 +125,7 @@ static void __attribute__((unused)) gen11_dsi_pre_enable(
>
> /* step3: enable DSI PLL */
> gen11_dsi_program_esc_clk_div(encoder);
> +
> + /* step4: enable DSI port and DPHY */
> + gen11_dsi_enable_port_and_phy(encoder);
> }
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
