On Thu, Jun 21, 2018 at 08:40:45PM +0300, Ville Syrjälä wrote:
> On Thu, Jun 21, 2018 at 06:58:29PM +0300, Imre Deak wrote:
> > So far we got an AUX power domain reference only for the duration of DP
> > AUX transfers. However, the followings suggest that we also need these
> > for main link functionality:
> > - The specification doesn't state whether it's needed or not for main
> > link functionality, but suggests that these power wells need to be
> > enabled already during display core initialization (Sequences to
> > Initialize Display).
> > - For PSR we need to keep the AUX power well enabled.
> > - On ICL combo PHY ports (non-TC) the AUX power well is needed for
> > link training too: while the port is enabled with a DP link training
> > test pattern trying to toggle the AUX power well will time out.
> > - On ICL MG PHY ports (TC) the AUX power well is needed also for main
> > link functionality (both in DP and HDMI modes).
> > - Windows enables these power wells both for main and AUX lane
> > functionality.
> >
> > Based on the above take an AUX power reference for main link
> > functionality too. This makes a difference only on GEN10+ (GLK+)
> > platforms, where we have separate port specific AUX power wells.
> >
> > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> > Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/i915/intel_ddi.c | 33 +++++++++++++++++++++++++++++----
> > drivers/gpu/drm/i915/intel_display.c | 12 +++++++++++-
> > drivers/gpu/drm/i915/intel_drv.h | 3 ++-
> > 3 files changed, 42 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> > index 044fe1fb9872..b09cb6969bbb 100644
> > --- a/drivers/gpu/drm/i915/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/intel_ddi.c
> > @@ -1983,15 +1983,36 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
> > return ret;
> > }
> >
> > -static u64 intel_ddi_get_power_domains(struct intel_encoder *encoder)
> > +static u64 intel_ddi_get_power_domains(struct intel_encoder *encoder,
> > + struct intel_crtc_state *crtc_state)
> > {
> > struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
> > enum pipe pipe;
> > + u64 domains;
> >
> > - if (intel_ddi_get_hw_state(encoder, &pipe))
> > - return BIT_ULL(dig_port->ddi_io_power_domain);
> > + if (!intel_ddi_get_hw_state(encoder, &pipe))
> > + return 0;
> >
> > - return 0;
> > + domains = BIT_ULL(dig_port->ddi_io_power_domain);
> > + if (!crtc_state)
> > + return domains;
> > +
> > + /*
> > + * TODO: Add support for MST encoders. Atm, the following should never
> > + * happen since this function will be called only for the primary
> > + * encoder which doesn't have its own pipe/crtc_state.
> > + */
> > + if (WARN_ON(intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)))
> > + return domains;
> > +
> > + /* AUX power is only needed for (e)DP mode, not for HDMI. */
> > + if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
>
> I would use intel_crtc_has_dp_encoder() here so that one doesn't
> have to think "what is not HDMI?".
Ok, makes sense.
>
> > + struct intel_dp *intel_dp = &dig_port->dp;
> > +
> > + domains |= BIT_ULL(intel_dp->aux_power_domain);
> > + }
> > +
> > + return domains;
> > }
> >
> > void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state)
> > @@ -2631,6 +2652,8 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
> >
> > WARN_ON(is_mst && (port == PORT_A || port == PORT_E));
> >
> > + intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> > +
> > intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
> > crtc_state->lane_count, is_mst);
> >
> > @@ -2775,6 +2798,8 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
> > intel_display_power_put(dev_priv, dig_port->ddi_io_power_domain);
> >
> > intel_ddi_clk_disable(encoder);
> > +
> > + intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> > }
> >
> > static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> > index 2c8fef3ede54..d9fefcec4b1a 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -15676,11 +15676,21 @@ get_encoder_power_domains(struct drm_i915_private *dev_priv)
> > for_each_intel_encoder(&dev_priv->drm, encoder) {
> > u64 get_domains;
> > enum intel_display_power_domain domain;
> > + struct intel_crtc_state *crtc_state;
> >
> > if (!encoder->get_power_domains)
> > continue;
> >
> > - get_domains = encoder->get_power_domains(encoder);
> > + /*
> > + * In case of a dangling encoder without a crtc we still need
> > + * to get power domain refs. Such encoders will be disabled
> > + * dropping these references.
> > + */
> > + crtc_state = encoder->base.crtc ?
> > + to_intel_crtc_state(encoder->base.crtc->state) :
> > + NULL;
> > +
> > + get_domains = encoder->get_power_domains(encoder, crtc_state);
> > for_each_power_domain(domain, get_domains)
> > intel_display_power_get(dev_priv, domain);
> > }
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 0c3ac0eafde0..7174429d930a 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -254,7 +254,8 @@ struct intel_encoder {
> > struct intel_crtc_state *pipe_config);
> > /* Returns a mask of power domains that need to be referenced as part
> > * of the hardware state readout code. */
> > - u64 (*get_power_domains)(struct intel_encoder *encoder);
> > + u64 (*get_power_domains)(struct intel_encoder *encoder,
> > + struct intel_crtc_state *crtc_state);
> > /*
> > * Called during system suspend after all pending requests for the
> > * encoder are flushed (for example for DP AUX transactions) and
> > --
> > 2.13.2
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
