Re: [PATCH 1/2] drm/i915/icl: Fix MG PLL setup when refclk is 38.4MHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 19, 2018 at 09:07:25AM +0300, Kulkarni, Vandita wrote:
> > -----Original Message-----
> > From: Deak, Imre
> > Sent: Monday, June 18, 2018 2:45 PM
> > To: Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>
> > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; Zanoni, Paulo R
> > <paulo.r.zanoni@xxxxxxxxx>; Ausmus, James <james.ausmus@xxxxxxxxx>
> > Subject: Re: [PATCH 1/2] drm/i915/icl: Fix MG PLL setup when refclk is
> > 38.4MHz
> > 
> > On Mon, Jun 18, 2018 at 11:11:30AM +0300, Kulkarni, Vandita wrote:
> > >
> > >
> > > > -----Original Message-----
> > > > From: Deak, Imre
> > > > Sent: Friday, June 15, 2018 8:09 PM
> > > > To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > Cc: Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>; Zanoni, Paulo R
> > > > <paulo.r.zanoni@xxxxxxxxx>; Ausmus, James
> > <james.ausmus@xxxxxxxxx>
> > > > Subject: [PATCH 1/2] drm/i915/icl: Fix MG PLL setup when refclk is
> > > > 38.4MHz
> > > >
> > > > Atm we're zeroing out fields in MG_PLL_BIAS and
> > > > MG_PLL_TDC_COLDST_BIAS if refclk is 38.4MHz, whereas the spec tells
> > > > us to preserve them.
> > > > Although the calculated values mostly match the register defaults
> > > > even for the 38.4MHz case, there are some differences wrt. what BIOS
> > > > programs (I noticed at least differences in the MG_PLL_BIAS/IREFTRIM
> > > > and MG_PLL_BIAS/BIASCAL_EN fields). In the lack of further info on
> > > > how to program these fields, just do what the spec says and preserve
> > > > the BIOS state.
> > > >
> > > > v2:
> > > > - Preserve the BIOS programmed reg fields instead of programming
> > them.
> > > >
> > > > Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> > > > Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
> > > > Cc: James Ausmus <james.ausmus@xxxxxxxxx>
> > > > Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx>
> > > > Reviewed-by: James Ausmus <james.ausmus@xxxxxxxxx> (v1)
> > > > ---
> > > >  drivers/gpu/drm/i915/intel_dpll_mgr.c | 63
> > > > +++++++++++++++++++++++++----------
> > > >  drivers/gpu/drm/i915/intel_dpll_mgr.h |  2 ++
> > > >  2 files changed, 47 insertions(+), 18 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > > b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > > index 132fe63e042a..d4c7bacbe83e 100644
> > > > --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > > +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c
> > > > @@ -2812,25 +2812,31 @@ static bool icl_calc_mg_pll_state(struct
> > > > intel_crtc_state *crtc_state,
> > > >  				MG_PLL_SSC_FLLEN |
> > > >  				MG_PLL_SSC_STEPSIZE(ssc_stepsize);
> > > >
> > > > -	pll_state->mg_pll_tdc_coldst_bias =
> > > > MG_PLL_TDC_COLDST_COLDSTART;
> > > > +	pll_state->mg_pll_tdc_coldst_bias =
> > > > MG_PLL_TDC_COLDST_COLDSTART |
> > > > +
> > > > MG_PLL_TDC_COLDST_IREFINT_EN |
> > > > +
> > > > MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(iref_pulse_w) |
> > > > +					    MG_PLL_TDC_TDCOVCCORR_EN |
> > > > +					    MG_PLL_TDC_TDCSEL(3);
> > > >
> > > > -	if (refclk_khz != 38400) {
> > > > -		pll_state->mg_pll_tdc_coldst_bias |=
> > > > -			MG_PLL_TDC_COLDST_IREFINT_EN |
> > > > -
> > > > 	MG_PLL_TDC_COLDST_REFBIAS_START_PULSE_W(iref_pulse_w) |
> > > > -			MG_PLL_TDC_COLDST_COLDSTART |
> > > > -			MG_PLL_TDC_TDCOVCCORR_EN |
> > > > -			MG_PLL_TDC_TDCSEL(3);
> > > > +	pll_state->mg_pll_bias = MG_PLL_BIAS_BIAS_GB_SEL(3) |
> > > > +				 MG_PLL_BIAS_INIT_DCOAMP(0x3F) |
> > > > +				 MG_PLL_BIAS_BIAS_BONUS(10) |
> > > > +				 MG_PLL_BIAS_BIASCAL_EN |
> > > > +				 MG_PLL_BIAS_CTRIM(12) |
> > > > +				 MG_PLL_BIAS_VREF_RDAC(4) |
> > > > +				 MG_PLL_BIAS_IREFTRIM(iref_trim);
> > > >
> > > > -		pll_state->mg_pll_bias = MG_PLL_BIAS_BIAS_GB_SEL(3) |
> > > > -					 MG_PLL_BIAS_INIT_DCOAMP(0x3F)
> > > > |
> > > > -					 MG_PLL_BIAS_BIAS_BONUS(10) |
> > > > -					 MG_PLL_BIAS_BIASCAL_EN |
> > > > -					 MG_PLL_BIAS_CTRIM(12) |
> > > > -					 MG_PLL_BIAS_VREF_RDAC(4) |
> > > > -					 MG_PLL_BIAS_IREFTRIM(iref_trim);
> > > > +	if (refclk_khz == 38400) {
> > > > +		pll_state->mg_pll_tdc_coldst_bias_mask =
> > > > MG_PLL_TDC_COLDST_COLDSTART;
> > > > +		pll_state->mg_pll_bias_mask = 0;
> > > > +	} else {
> > > > +		pll_state->mg_pll_tdc_coldst_bias_mask = -1U;
> > > > +		pll_state->mg_pll_bias_mask = -1U;
> > > >  	}
> > > >
> > > > +	pll_state->mg_pll_tdc_coldst_bias &= pll_state-
> > > > >mg_pll_tdc_coldst_bias_mask;
> > > > +	pll_state->mg_pll_bias &= pll_state->mg_pll_bias_mask;
> > > > +
> > > >  	return true;
> > > >  }
> > > >
> > > > @@ -2948,9 +2954,21 @@ static bool icl_pll_get_hw_state(struct
> > > > drm_i915_private *dev_priv,
> > > >  		hw_state->mg_pll_lf = I915_READ(MG_PLL_LF(port));
> > > >  		hw_state->mg_pll_frac_lock =
> > > > I915_READ(MG_PLL_FRAC_LOCK(port));
> > > >  		hw_state->mg_pll_ssc = I915_READ(MG_PLL_SSC(port));
> > > > +
> > > >  		hw_state->mg_pll_bias = I915_READ(MG_PLL_BIAS(port));
> > > >  		hw_state->mg_pll_tdc_coldst_bias =
> > > >  			I915_READ(MG_PLL_TDC_COLDST_BIAS(port));
> > > > +
> > > > +		if (dev_priv->cdclk.hw.ref == 38400) {
> > > > +			hw_state->mg_pll_tdc_coldst_bias_mask =
> > > > MG_PLL_TDC_COLDST_COLDSTART;
> > > > +			hw_state->mg_pll_bias_mask = 0;
> > > > +		} else {
> > > > +			hw_state->mg_pll_tdc_coldst_bias_mask = -1U;
> > > > +			hw_state->mg_pll_bias_mask = -1U;
> > > > +		}
> > > > +
> > > > +		hw_state->mg_pll_tdc_coldst_bias &= hw_state-
> > > > >mg_pll_tdc_coldst_bias_mask;
> > > > +		hw_state->mg_pll_bias &= hw_state->mg_pll_bias_mask;
> > > >  		break;
> > > >  	default:
> > > >  		MISSING_CASE(id);
> > > > @@ -2978,6 +2996,7 @@ static void icl_mg_pll_write(struct
> > > > drm_i915_private *dev_priv,  {
> > > >  	struct intel_dpll_hw_state *hw_state = &pll->state.hw_state;
> > > >  	enum port port = icl_mg_pll_id_to_port(pll->info->id);
> > > > +	u32 val;
> > > >
> > > >  	I915_WRITE(MG_REFCLKIN_CTL(port), hw_state->mg_refclkin_ctl);
> > > >  	I915_WRITE(MG_CLKTOP2_CORECLKCTL1(port),
> > > > @@ -2988,9 +3007,17 @@ static void icl_mg_pll_write(struct
> > > > drm_i915_private *dev_priv,
> > > >  	I915_WRITE(MG_PLL_LF(port), hw_state->mg_pll_lf);
> > > >  	I915_WRITE(MG_PLL_FRAC_LOCK(port), hw_state-
> > > > >mg_pll_frac_lock);
> > > >  	I915_WRITE(MG_PLL_SSC(port), hw_state->mg_pll_ssc);
> > > > -	I915_WRITE(MG_PLL_BIAS(port), hw_state->mg_pll_bias);
> > > > -	I915_WRITE(MG_PLL_TDC_COLDST_BIAS(port),
> > > > -		   hw_state->mg_pll_tdc_coldst_bias);
> > > > +
> > > > +	val = I915_READ(MG_PLL_BIAS(port));
> > > > +	val &= ~hw_state->mg_pll_bias_mask;
> > > > +	val |= hw_state->mg_pll_bias;
> > > > +	I915_WRITE(MG_PLL_BIAS(port), val);
> > > > +
> > > Looks like we are writing the exact read value for pll_bias when
> > > ref_clk is 38400, we can skip this write or is it mandatory  to write?
> > 
> > I'm still hoping that we'll get the proper programming steps for the
> > 38.4MHz case too, at which point we can remove the special casing during
> > the calculation step and write here the calculated values in all cases.
> > It's also not a performance critical part, so I'd rather avoid adding more
> > special casing.
> 
> Thanks for the clarification. I saw that algo in the bspec said to
> program only when ref_clk!=38400 and leave as default in 38400 case.
> In which case we wouldn't need the masks.

Yes, and that's what this code does, we leave this register unchanged in
case of ref_clk=38.4MHz. We do need the masks as the generic way to say
which fields in which registers to change. This function doesn't need to
care about some other state outside of intel_dpll_hw_state.

> We can directly check the ref clk.  

I'd like to have the full state included in intel_dpll_hw_state, as that
is used by the HW/SW state checker and the shared PLL framework to see
if a PLL can be reused by doing a memcmp on this struct.

> I think, may be we can leave the programming to default for 38400 and
> handle it when bspec gets updated with new calculation.

Yes, the patch leaves this register at its default in the 38.4MHz case.

> 
> The rest of the patch looks good to me.
> > 
> > > > +	val = I915_READ(MG_PLL_TDC_COLDST_BIAS(port));
> > > > +	val &= ~hw_state->mg_pll_tdc_coldst_bias_mask;
> > > > +	val |= hw_state->mg_pll_tdc_coldst_bias;
> > > > +	I915_WRITE(MG_PLL_TDC_COLDST_BIAS(port), val);
> > > > +
> > > Same here.
> > 
> > We have to write MG_PLL_TDC_COLDST_COLDSTART in all cases.
> > 
> > > >  	POSTING_READ(MG_PLL_TDC_COLDST_BIAS(port));
> > > >  }
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.h
> > > > b/drivers/gpu/drm/i915/intel_dpll_mgr.h
> > > > index ba925c7ee482..7e522cf4f13f 100644
> > > > --- a/drivers/gpu/drm/i915/intel_dpll_mgr.h
> > > > +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.h
> > > > @@ -180,6 +180,8 @@ struct intel_dpll_hw_state {
> > > >  	uint32_t mg_pll_ssc;
> > > >  	uint32_t mg_pll_bias;
> > > >  	uint32_t mg_pll_tdc_coldst_bias;
> > > > +	uint32_t mg_pll_bias_mask;
> > > > +	uint32_t mg_pll_tdc_coldst_bias_mask;
> > > >  };
> > > >
> > > >  /**
> > > > --
> > > > 2.13.2
> > >
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux