[CI 2/2] drm/i915/execlists: Reset the CSB head tracking on reset/sanitization

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We can avoid the mmio read of the CSB pointers after reset based on the
knowledge that the HW always start writing at entry 0 in the CSB buffer.
We need to reset our CSB head tracking after GPU reset (and on
sanitization after resume) so that we are expecting to read from entry
0, hence we reset our head tracking back to the entry before (the last
entry in the ring).

Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_lrc.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 839cb1fc6a01..340c82efed4a 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -970,22 +970,19 @@ static void process_csb(struct intel_engine_cs *engine)
 			&engine->status_page.page_addr[I915_HWS_CSB_BUF0_INDEX];
 		unsigned int head, tail;
 
-		if (unlikely(execlists->csb_use_mmio)) {
-			buf = (u32 * __force)
-				(i915->regs + i915_mmio_reg_offset(RING_CONTEXT_STATUS_BUF_LO(engine, 0)));
-			execlists->csb_head = -1; /* force mmio read of CSB */
-		}
-
 		/* Clear before reading to catch new interrupts */
 		clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted);
 		smp_mb__after_atomic();
 
-		if (unlikely(execlists->csb_head == -1)) { /* after a reset */
+		if (unlikely(execlists->csb_use_mmio)) {
 			if (!fw) {
 				intel_uncore_forcewake_get(i915, execlists->fw_domains);
 				fw = true;
 			}
 
+			buf = (u32 * __force)
+				(i915->regs + i915_mmio_reg_offset(RING_CONTEXT_STATUS_BUF_LO(engine, 0)));
+
 			head = readl(i915->regs + i915_mmio_reg_offset(RING_CONTEXT_STATUS_PTR(engine)));
 			tail = GEN8_CSB_WRITE_PTR(head);
 			head = GEN8_CSB_READ_PTR(head);
@@ -1960,7 +1957,7 @@ static void execlists_reset(struct intel_engine_cs *engine,
 	spin_unlock(&engine->timeline.lock);
 
 	/* Following the reset, we need to reload the CSB read/write pointers */
-	engine->execlists.csb_head = -1;
+	engine->execlists.csb_head = GEN8_CSB_ENTRIES - 1;
 
 	local_irq_restore(flags);
 
@@ -2468,7 +2465,7 @@ static int logical_ring_init(struct intel_engine_cs *engine)
 			upper_32_bits(ce->lrc_desc);
 	}
 
-	engine->execlists.csb_head = -1;
+	engine->execlists.csb_head = GEN8_CSB_ENTRIES - 1;
 
 	return 0;
 
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux