On 5/12/2018 1:21 AM, Dhinakaran Pandiyan wrote:
While touching the code around this, I noticed that absence of ALPM
capability does not stop us from enabling PSR2. But, the spec
unambiguously states that ALPM is required for PSR2 and so does this
commit that introduced this code
drm/i915/psr: enable ALPM for psr2
As per edp1.4 spec , alpm is required for psr2 operation as it's
used for all psr2 main link power down management and alpm enable
bit must be set for psr2 operation.
Cc: Jose Roberto de Souza <jose.souza@xxxxxxxxx>
Cc: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_psr.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index b4a4f5d3a2bb..92abf61e234c 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -254,6 +254,10 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
if (INTEL_GEN(dev_priv) >= 9 &&
(intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_IS_SUPPORTED)) {
+ bool y_req = intel_dp->psr_dpcd[1] &
+ DP_PSR2_SU_Y_COORDINATE_REQUIRED;
+ bool alpm = intel_dp_get_alpm_status(intel_dp);
+
/*
* All panels that supports PSR version 03h (PSR2 +
* Y-coordinate) can handle Y-coordinates in VSC but we are
@@ -265,16 +269,13 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
* Y-coordinate requirement panels we would need to enable
* GTC first.
*/
- dev_priv->psr.sink_psr2_support =
- intel_dp->psr_dpcd[1] & DP_PSR2_SU_Y_COORDINATE_REQUIRED;
+ dev_priv->psr.sink_psr2_support = y_req && alpm;
DRM_DEBUG_KMS("PSR2 %ssupported\n",
dev_priv->psr.sink_psr2_support ? "" : "not ");
if (dev_priv->psr.sink_psr2_support) {
dev_priv->psr.colorimetry_support =
intel_dp_get_colorimetry_status(intel_dp);
- dev_priv->psr.alpm =
- intel_dp_get_alpm_status(intel_dp);
dev_priv->psr.sink_sync_latency =
intel_dp_get_sink_sync_latency(intel_dp);
}
@@ -386,13 +387,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
u8 dpcd_val = DP_PSR_ENABLE;
/* Enable ALPM at sink for psr2 */
- if (dev_priv->psr.psr2_enabled && dev_priv->psr.alpm)
- drm_dp_dpcd_writeb(&intel_dp->aux,
- DP_RECEIVER_ALPM_CONFIG,
- DP_ALPM_ENABLE);
-
- if (dev_priv->psr.psr2_enabled)
+ if (dev_priv->psr.psr2_enabled) {
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG,
+ DP_ALPM_ENABLE);
dpcd_val |= DP_PSR_ENABLE_PSR2;
+ }
ALPM is needed for fast wake.
Reviewed-by: Vathsala Nagaraju <vathsala.nagaraju@xxxxxxxxx>
+
if (dev_priv->psr.link_standby)
dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, dpcd_val);
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
