On Monday 14 May 2018 02:38 PM, Shankar, Uma wrote:
-----Original Message-----
From: Intel-gfx [mailto:intel-gfx-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of
Ramalingam C
Sent: Tuesday, April 3, 2018 7:28 PM
To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx;
seanpaul@xxxxxxxxxxxx; daniel@xxxxxxxx; chris@xxxxxxxxxxxxxxxxxx;
jani.nikula@xxxxxxxxxxxxxxx; Winkler, Tomas <tomas.winkler@xxxxxxxxx>;
Usyskin, Alexander <alexander.usyskin@xxxxxxxxx>
Cc: Vivi, Rodrigo <rodrigo.vivi@xxxxxxxxx>
Subject: [PATCH v3 24/40] drm/i915: Implement HDCP2.2 repeater
authentication
Implements the HDCP2.2 repeaters authentication steps such as verifying the
downstream topology and sending stream management information.
v2:
Rebased.
v3:
No Changes.
Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_hdcp.c | 135
++++++++++++++++++++++++++++++++++++++
1 file changed, 135 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_hdcp.c
b/drivers/gpu/drm/i915/intel_hdcp.c
index ee9b7519fe73..d70320da85e4 100644
--- a/drivers/gpu/drm/i915/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/intel_hdcp.c
@@ -1145,6 +1145,135 @@ static int hdcp2_session_key_exchange(struct
intel_connector *connector)
return 0;
}
+/*
+ * Lib endianness functions are aligned for 16/32/64 bits. Since here
+sequence
+ * num is 24bits developed a small conversion function.
+ */
+static inline void reverse_endianness(u8 *dest, size_t dst_sz, u8 *src)
This function is already defined and used in mei layer. Define this in some
common header file and use instead of duplicating it here. May be in below file:
<drm/drm_connector.h>
Sure.
--Ram
+{
+ u32 index;
+
+ if (dest != NULL && dst_sz != 0) {
+ for (index = 0; index < dst_sz && index < sizeof(u32);
+ index++) {
+ dest[dst_sz - index - 1] = src[index];
+ }
+ }
+}
+
+static
+int hdcp2_propagate_stream_management_info(struct intel_connector
+*connector) {
+ struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+ struct intel_hdcp *hdcp = &connector->hdcp;
+ union {
+ struct hdcp2_rep_stream_manage stream_manage;
+ struct hdcp2_rep_stream_ready stream_ready;
+ } msgs;
+ const struct intel_hdcp_shim *shim = hdcp->hdcp_shim;
+ int ret;
+
+ /* Prepare RepeaterAuth_Stream_Manage msg */
+ msgs.stream_manage.msg_id = HDCP_2_2_REP_STREAM_MANAGE;
+ reverse_endianness(msgs.stream_manage.seq_num_m,
HDCP_2_2_SEQ_NUM_LEN,
+ (u8 *)&hdcp->seq_num_m);
+
+ /* K no of streams is fixed as 1. Stored as big-endian. */
+ msgs.stream_manage.k = __swab16(1);
+
+ /* For HDMI this is forced to be 0x0. For DP SST also this is 0x0. */
+ msgs.stream_manage.streams[0].stream_id = 0;
+ msgs.stream_manage.streams[0].stream_type = hdcp->content_type;
+
+ /* Send it to Repeater */
+ ret = shim->write_2_2_msg(intel_dig_port, &msgs.stream_manage,
+ sizeof(msgs.stream_manage));
+ if (ret < 0)
+ return ret;
+
+ ret = shim->read_2_2_msg(intel_dig_port,
HDCP_2_2_REP_STREAM_READY,
+ &msgs.stream_ready,
sizeof(msgs.stream_ready));
+ if (ret < 0)
+ return ret;
+
+ hdcp->mei_data.seq_num_m = hdcp->seq_num_m;
+ hdcp->mei_data.streams[0].stream_type = hdcp->content_type;
+
+ ret = hdcp2_verify_mprime(hdcp, &msgs.stream_ready);
+ if (ret < 0)
+ return ret;
+
+ hdcp->seq_num_m++;
+
+ if (hdcp->seq_num_m > HDCP_2_2_SEQ_NUM_MAX) {
+ DRM_DEBUG_KMS("seq_num_m roll over.\n");
+ return -1;
+ }
Leave a blank line.
+ return 0;
+}
+
+static
+int hdcp2_authenticate_repeater_topology(struct intel_connector
+*connector) {
+ struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
+ struct intel_hdcp *hdcp = &connector->hdcp;
+ union {
+ struct hdcp2_rep_send_receiverid_list recvid_list;
+ struct hdcp2_rep_send_ack rep_ack;
+ } msgs;
+ const struct intel_hdcp_shim *shim = hdcp->hdcp_shim;
+ uint8_t *rx_info;
+ uint32_t seq_num_v;
+ int ret;
+
+ ret = shim->read_2_2_msg(intel_dig_port,
HDCP_2_2_REP_SEND_RECVID_LIST,
+ &msgs.recvid_list, sizeof(msgs.recvid_list));
+ if (ret < 0)
+ return ret;
+
+ rx_info = msgs.recvid_list.rx_info;
+
+ if (HDCP_2_2_MAX_CASCADE_EXCEEDED(rx_info[1]) ||
+ HDCP_2_2_MAX_DEVS_EXCEEDED(rx_info[1])) {
+ DRM_DEBUG_KMS("Topology Max Size Exceeded\n");
+ return -1;
+ }
+
+ /* Converting and Storing the seq_num_v to local variable as DWORD */
+ reverse_endianness((u8 *)&seq_num_v, HDCP_2_2_SEQ_NUM_LEN,
+ msgs.recvid_list.seq_num_v);
+
+ if (seq_num_v < hdcp->seq_num_v) {
+ /* Roll over of the seq_num_v from repeater. Reauthenticate. */
+ DRM_DEBUG_KMS("Seq_num_v roll over.\n");
+ return -1;
+ }
+
+ ret = hdcp2_verify_rep_topology_prepare_ack(hdcp, &msgs.recvid_list,
+ &msgs.rep_ack);
+ if (ret < 0)
+ return ret;
+
+ hdcp->seq_num_v = seq_num_v;
+ ret = shim->write_2_2_msg(intel_dig_port, &msgs.rep_ack,
+ sizeof(msgs.rep_ack));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int hdcp2_authenticate_repeater(struct intel_connector
+*connector) {
+ int ret;
+
+ ret = hdcp2_authenticate_repeater_topology(connector);
+ if (ret < 0)
+ return ret;
+
+ return hdcp2_propagate_stream_management_info(connector);
+}
+
static int hdcp2_authenticate_sink(struct intel_connector *connector) {
struct intel_digital_port *intel_dig_port = conn_to_dig_port(connector);
@@ -1186,6 +1315,12 @@ static int hdcp2_authenticate_sink(struct
intel_connector *connector)
sizeof(stream_type_msg));
if (ret < 0)
return ret;
+ } else if (hdcp->is_repeater) {
+ ret = hdcp2_authenticate_repeater(connector);
+ if (ret < 0) {
+ DRM_DEBUG_KMS("Repeater Auth Failed. Err: %d\n",
ret);
+ return ret;
+ }
}
hdcp->mei_data.streams[0].stream_type = hdcp->content_type;
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
