On Wed, 09 May 2018, Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> wrote:
> On Wed, 09 May 2018, Colin King <colin.king@xxxxxxxxxxxxx> wrote:
>> From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>>
>> Trivial fix to spelling mistakes in WARN warning message text and
>> in comments:
>>
>> "seqeuncer", "seqeuencer" -> "sequencer"
>>
>> Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>
> Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>
>
> (Waiting for the CI runs before merging.)
And pushed to dinq, thanks for the patch.
BR,
Jani.
>
>> ---
>>
>> V2: Also fix seqeuencer in comments
>>
>> ---
>> drivers/gpu/drm/i915/intel_dp.c | 12 ++++++------
>> 1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index dde92e4af5d3..2cc58596ff5a 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -513,7 +513,7 @@ vlv_power_sequencer_kick(struct intel_dp *intel_dp)
>> uint32_t DP;
>>
>> if (WARN(I915_READ(intel_dp->output_reg) & DP_PORT_EN,
>> - "skipping pipe %c power seqeuncer kick due to port %c being active\n",
>> + "skipping pipe %c power sequencer kick due to port %c being active\n",
>> pipe_name(pipe), port_name(intel_dig_port->base.port)))
>> return;
>>
>> @@ -554,7 +554,7 @@ vlv_power_sequencer_kick(struct intel_dp *intel_dp)
>> /*
>> * Similar magic as in intel_dp_enable_port().
>> * We _must_ do this port enable + disable trick
>> - * to make this power seqeuencer lock onto the port.
>> + * to make this power sequencer lock onto the port.
>> * Otherwise even VDD force bit won't work.
>> */
>> I915_WRITE(intel_dp->output_reg, DP);
>> @@ -3066,11 +3066,11 @@ static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
>> edp_panel_vdd_off_sync(intel_dp);
>>
>> /*
>> - * VLV seems to get confused when multiple power seqeuencers
>> + * VLV seems to get confused when multiple power sequencers
>> * have the same port selected (even if only one has power/vdd
>> * enabled). The failure manifests as vlv_wait_port_ready() failing
>> * CHV on the other hand doesn't seem to mind having the same port
>> - * selected in multiple power seqeuencers, but let's clear the
>> + * selected in multiple power sequencers, but let's clear the
>> * port select always when logically disconnecting a power sequencer
>> * from a port.
>> */
>> @@ -5698,7 +5698,7 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
>>
>> /*
>> * On some VLV machines the BIOS can leave the VDD
>> - * enabled even on power seqeuencers which aren't
>> + * enabled even on power sequencers which aren't
>> * hooked up to any port. This would mess up the
>> * power domain tracking the first time we pick
>> * one of these power sequencers for use since
>> @@ -5706,7 +5706,7 @@ intel_dp_init_panel_power_sequencer_registers(struct intel_dp *intel_dp,
>> * already on and therefore wouldn't grab the power
>> * domain reference. Disable VDD first to avoid this.
>> * This also avoids spuriously turning the VDD on as
>> - * soon as the new power seqeuencer gets initialized.
>> + * soon as the new power sequencer gets initialized.
>> */
>> if (force_disable_vdd) {
>> u32 pp = ironlake_get_pp_control(intel_dp);
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
