By moving the check from psr_compute_config() to psr_init_dpcd(), we get
to set the dev_priv->psr.sink_support flag only when the panel is
capable of changing power state. An additional benefit is that the check
will be performed only at init time instead of every atomic_check.
This should change the psr_basic IGT failures on HSW to skips.
v2: Return early when SET_POWER_CAPABLE bit is 0 (Jose)
Cc: José Roberto de Souza <jose.souza@xxxxxxxxx>
Cc: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
Reviewed-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 8 ++++++--
drivers/gpu/drm/i915/intel_psr.c | 12 ++++++------
2 files changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index dde92e4af5d3..f1747dff9ca3 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3762,8 +3762,6 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
dev_priv->no_aux_handshake = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
- intel_psr_init_dpcd(intel_dp);
-
/*
* Read the eDP display control registers.
*
@@ -3779,6 +3777,12 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
DRM_DEBUG_KMS("eDP DPCD: %*ph\n", (int) sizeof(intel_dp->edp_dpcd),
intel_dp->edp_dpcd);
+ /*
+ * This has to be called after initializing intel_dp->edp_dpcd, PSR
+ * checks for the SET_POWER_CAPABLE bit.
+ */
+ intel_psr_init_dpcd(intel_dp);
+
/* Read the eDP 1.4+ supported link rates. */
if (intel_dp->edp_dpcd[0] >= DP_EDP_14) {
__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index db27f2faa1de..7e52e2ea1624 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -251,8 +251,13 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
sizeof(intel_dp->psr_dpcd));
if (intel_dp->psr_dpcd[0]) {
+ DRM_DEBUG_KMS("Detected EDP PSR panel\n");
+
+ if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) {
+ DRM_DEBUG_KMS("Panel lacks power state control, PSR cannot be enabled\n");
+ return;
+ }
dev_priv->psr.sink_support = true;
- DRM_DEBUG_KMS("Detected EDP PSR Panel.\n");
}
if (INTEL_GEN(dev_priv) >= 9 &&
@@ -640,11 +645,6 @@ void intel_psr_compute_config(struct intel_dp *intel_dp,
return;
}
- if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) {
- DRM_DEBUG_KMS("PSR condition failed: panel lacks power state control\n");
- return;
- }
-
crtc_state->has_psr = true;
crtc_state->has_psr2 = intel_psr2_config_valid(intel_dp, crtc_state);
DRM_DEBUG_KMS("Enabling PSR%s\n", crtc_state->has_psr2 ? "2" : "");
--
2.14.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
