>-----Original Message----- >From: dri-devel [mailto:dri-devel-bounces@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of >Ramalingam C >Sent: Tuesday, April 3, 2018 7:27 PM >To: intel-gfx@xxxxxxxxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx; >seanpaul@xxxxxxxxxxxx; daniel@xxxxxxxx; chris@xxxxxxxxxxxxxxxxxx; >jani.nikula@xxxxxxxxxxxxxxx; Winkler, Tomas <tomas.winkler@xxxxxxxxx>; >Usyskin, Alexander <alexander.usyskin@xxxxxxxxx> >Cc: Vivi, Rodrigo <rodrigo.vivi@xxxxxxxxx> >Subject: [PATCH v3 02/40] drm: HDMI and DP specific HDCP2.2 defines > >In preparation for implementing HDCP2.2 in I915, this patch adds HDCP register >definitions for HDMI and DP HDCP adaptations. I believe we can just keep this message generic at drm layer, instead of calling out i915 specifically. Currently it may be enabled for i915, but it will used for other drivers as well in future. > >HDMI specific HDCP2.2 register definitions are added into drm_hdcp.h, where are Make it "where as". >HDCP2.2 register offsets in DPCD offsets are defined at drm_dp_helper.h. > >v2: > bit_field definitions are replaced by macros. [Tomas and Jany] Typo in "Jani's" name. >v3: > No Changes. > >Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx> >--- > include/drm/drm_dp_helper.h | 54 >+++++++++++++++++++++++++++++++++++++++++++++ > include/drm/drm_hdcp.h | 29 ++++++++++++++++++++++++ > 2 files changed, 83 insertions(+) > >diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index >4de97e94ef9d..2185b3a88911 100644 >--- a/include/drm/drm_dp_helper.h >+++ b/include/drm/drm_dp_helper.h >@@ -887,6 +887,60 @@ > #define DP_AUX_HDCP_KSV_FIFO 0x6802C > #define DP_AUX_HDCP_AINFO 0x6803B > >+/** >+ * DP HDCP2.2 parameter offsets in DPCD address space */ Rectify the comment style >+#define DP_HDCP_2_2_REG_RTX_OFFSET 0x69000 >+#define DP_HDCP_2_2_REG_TXCAPS_OFFSET 0x69008 >+#define DP_HDCP_2_2_REG_CERT_RX_OFFSET 0x6900B >+#define DP_HDCP_2_2_REG_RRX_OFFSET 0x69215 >+#define DP_HDCP_2_2_REG_RX_CAPS_OFFSET 0x6921D >+#define DP_HDCP_2_2_REG_EKPUB_KM_OFFSET 0x69220 >+#define DP_HDCP_2_2_REG_EKH_KM_OFFSET 0x692A0 >+#define DP_HDCP_2_2_REG_M_OFFSET 0x692B0 >+#define DP_HDCP_2_2_REG_HPRIME_OFFSET 0x692C0 >+#define DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET 0x692E0 >+#define DP_HDCP_2_2_REG_RN_OFFSET 0x692F0 >+#define DP_HDCP_2_2_REG_LPRIME_OFFSET 0x692F8 >+#define DP_HDCP_2_2_REG_EDKEY_KS_OFFSET 0x69318 >+#define DP_HDCP_2_2_REG_RIV_OFFSET 0x69328 >+#define DP_HDCP_2_2_REG_RXINFO_OFFSET 0x69330 >+#define DP_HDCP_2_2_REG_SEQ_NUM_V_OFFSET 0x69332 >+#define DP_HDCP_2_2_REG_VPRIME_OFFSET 0x69335 >+#define DP_HDCP_2_2_REG_RECV_ID_LIST_OFFSET 0x69345 >+#define DP_HDCP_2_2_REG_V_OFFSET 0x693E0 >+#define DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET 0x693F0 >+#define DP_HDCP_2_2_REG_K_OFFSET 0x693F3 >+#define DP_HDCP_2_2_REG_STREAM_ID_TYPE_OFFSET 0x693F5 >+#define DP_HDCP_2_2_REG_MPRIME_OFFSET 0x69473 >+#define DP_HDCP_2_2_REG_RXSTATUS_OFFSET 0x69493 >+#define DP_HDCP_2_2_REG_STREAM_TYPE_OFFSET 0x69494 This is not matching to the spec. Seems reserved in spec. >+#define DP_HDCP_2_2_REG_DBG_OFFSET 0x69518 >+ >+/** >+ * DP HDCP message start offsets in DPCD address space */ Rectify comment style >+#define DP_HDCP_2_2_AKE_INIT_OFFSET > DP_HDCP_2_2_REG_RTX_OFFSET >+#define DP_HDCP_2_2_AKE_SEND_CERT_OFFSET > DP_HDCP_2_2_REG_CERT_RX_OFFSET >+#define DP_HDCP_2_2_AKE_NO_STORED_KM_OFFSET > DP_HDCP_2_2_REG_EKPUB_KM_OFFSET >+#define DP_HDCP_2_2_AKE_STORED_KM_OFFSET > DP_HDCP_2_2_REG_EKH_KM_OFFSET >+#define DP_HDCP_2_2_AKE_SEND_HPRIME_OFFSET > DP_HDCP_2_2_REG_HPRIME_OFFSET >+#define DP_HDCP_2_2_AKE_SEND_PARING_INFO_OFFSET Typo in pairing > DP_HDCP_2_2_REG_EKH_KM_RD_OFFSET >+#define DP_HDCP_2_2_LC_INIT_OFFSET > DP_HDCP_2_2_REG_RN_OFFSET >+#define DP_HDCP_2_2_LC_SEND_LPRIME_OFFSET > DP_HDCP_2_2_REG_LPRIME_OFFSET >+#define DP_HDCP_2_2_SKE_SEND_EKS_OFFSET > DP_HDCP_2_2_REG_EDKEY_KS_OFFSET >+#define DP_HDCP_2_2_REP_SEND_RECVID_LIST_OFFSET > DP_HDCP_2_2_REG_RXINFO_OFFSET >+#define DP_HDCP_2_2_REP_SEND_ACK_OFFSET > DP_HDCP_2_2_REG_V_OFFSET >+#define DP_HDCP_2_2_REP_STREAM_MANAGE_OFFSET > DP_HDCP_2_2_REG_SEQ_NUM_M_OFFSET >+#define DP_HDCP_2_2_REP_STREAM_READY_OFFSET > DP_HDCP_2_2_REG_MPRIME_OFFSET >+ >+#define HDCP_2_2_DP_RXSTATUS_LEN 1 >+#define HDCP_2_2_DP_RXSTATUS_READY(x) (x & BIT(0)) >+#define HDCP_2_2_DP_RXSTATUS_H_PRIME(x) (x & BIT(1)) >+#define HDCP_2_2_DP_RXSTATUS_PAIRING(x) (x & BIT(2)) >+#define HDCP_2_2_DP_RXSTATUS_REAUTH_REQ(x) (x & BIT(3)) >+#define HDCP_2_2_DP_RXSTATUS_LINK_FAILED(x) (x & BIT(4)) >+ > /* DP 1.2 Sideband message defines */ > /* peer device type - DP 1.2a Table 2-92 */ Make it multi line comment. > #define DP_PEER_DEVICE_NONE 0x0 >diff --git a/include/drm/drm_hdcp.h b/include/drm/drm_hdcp.h index >5e0a5ed1a08e..f3f28414b189 100644 >--- a/include/drm/drm_hdcp.h >+++ b/include/drm/drm_hdcp.h >@@ -221,4 +221,33 @@ struct hdcp2_dp_errata_stream_type { > uint8_t stream_type; > } __packed; > >+/* HDCP2.2 TIMEOUTs in mSec */ >+#define HDCP_2_2_CERT_TIMEOUT 100 >+#define HDCP_2_2_HPRIME_NO_PAIRED_TIMEOUT 1000 >+#define HDCP_2_2_HPRIME_PAIRED_TIMEOUT 200 >+#define HDCP_2_2_PAIRING_TIMEOUT 200 >+#define HDCP_2_2_HDMI_LPRIME_TIMEOUT 20 >+#define HDCP_2_2_DP_LPRIME_TIMEOUT 7 >+#define HDCP_2_2_RECVID_LIST_TIMEOUT 3000 >+#define HDCP_2_2_STREAM_READY_TIMEOUT 100 >+ >+/* HDMI HDCP2.2 Register Offsets */ >+#define HDCP_2_2_HDMI_REG_VER_OFFSET 0x50 >+#define HDCP_2_2_HDMI_REG_WR_MSG_OFFSET 0x60 >+#define HDCP_2_2_HDMI_REG_RXSTATUS_OFFSET 0x70 >+#define HDCP_2_2_HDMI_REG_RD_MSG_OFFSET 0x80 >+#define HDCP_2_2_HDMI_REG_DBG_OFFSET 0xC0 >+ >+#define HDCP_2_2_HDMI_SUPPORT_MASK BIT(2) >+#define HDCP_2_2_RXCAPS_VERSION_VAL 0x2 >+ >+#define HDCP_2_2_RX_CAPS_VERSION_VAL 0x02 >+#define HDCP_2_2_SEQ_NUM_MAX 0xFFFFFF >+#define HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN 200 >+ >+#define HDCP_2_2_HDMI_RXSTATUS_LEN 2 >+#define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x) (x & 0x3) This seems to be a 10 bit field. Please check or am I missing something ? >+#define HDCP_2_2_HDMI_RXSTATUS_READY(x) (x & BIT(2)) It should be bit 10. Add a comment to explain so that it gets easier to match to spec. >+#define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x) (x & BIT(3)) Same as above. May be add a generic comment. >+ > #endif >-- >2.7.4 > >_______________________________________________ >dri-devel mailing list >dri-devel@xxxxxxxxxxxxxxxxxxxxx >https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ Intel-gfx mailing list Intel-gfx@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/intel-gfx
