Re: [PATCH v2 1/3] drm/i915: Replace vbt edp.support with int_lvds_support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 08 May 2018, Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Replace dev_priv->vbt.edp.support with
> dev_priv->vbt.int_lvds_support. We'll want to extend its
> use beyond the LVDS vs. eDP case in the future.
>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
> Cc: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_drv.h   | 2 +-
>  drivers/gpu/drm/i915/intel_bios.c | 5 ++++-
>  drivers/gpu/drm/i915/intel_lvds.c | 9 +++++----
>  3 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 04e27806e581..3bdc7cfd4189 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1052,6 +1052,7 @@ struct intel_vbt_data {
>  	unsigned int lvds_vbt:1;
>  	unsigned int int_crt_support:1;
>  	unsigned int lvds_use_ssc:1;
> +	unsigned int int_lvds_support:1;
>  	unsigned int display_clock_mode:1;
>  	unsigned int fdi_rx_polarity_inverted:1;
>  	unsigned int panel_type:4;
> @@ -1067,7 +1068,6 @@ struct intel_vbt_data {
>  		int vswing;
>  		bool low_vswing;
>  		bool initialized;
> -		bool support;
>  		int bpp;
>  		struct edp_power_seq pps;
>  	} edp;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c
> index 702d3fab97fc..49c6816d008c 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -519,7 +519,7 @@ parse_driver_features(struct drm_i915_private *dev_priv,
>  		return;
>  
>  	if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
> -		dev_priv->vbt.edp.support = 1;
> +		dev_priv->vbt.int_lvds_support = 0;

Sorry to nitpick, but this now changes behaviour for pre-PCH split
platforms. Worse, patch 2 then reverts that change. I think you could've
added the if (gen >= 5) check already here to not modify behaviour.

parse_edp() also needs to drop references to dev_priv->vbt.edp.support.

BR,
Jani.

>  
>  	DRM_DEBUG_KMS("DRRS State Enabled:%d\n", driver->drrs_enabled);
>  	/*
> @@ -1512,6 +1512,9 @@ init_vbt_defaults(struct drm_i915_private *dev_priv)
>  	dev_priv->vbt.int_tv_support = 1;
>  	dev_priv->vbt.int_crt_support = 1;
>  
> +	/* driver features */
> +	dev_priv->vbt.int_lvds_support = 1;
> +
>  	/* Default to using SSC */
>  	dev_priv->vbt.lvds_use_ssc = 1;
>  	/*
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index d35d2d50f595..05d012358df8 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -965,6 +965,11 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
>  	if (dmi_check_system(intel_no_lvds))
>  		return;
>  
> +	if (!dev_priv->vbt.int_lvds_support) {
> +		DRM_DEBUG_KMS("Internal LVDS support disabled by VBT\n");
> +		return;
> +	}
> +
>  	if (HAS_PCH_SPLIT(dev_priv))
>  		lvds_reg = PCH_LVDS;
>  	else
> @@ -975,10 +980,6 @@ void intel_lvds_init(struct drm_i915_private *dev_priv)
>  	if (HAS_PCH_SPLIT(dev_priv)) {
>  		if ((lvds & LVDS_DETECTED) == 0)
>  			return;
> -		if (dev_priv->vbt.edp.support) {
> -			DRM_DEBUG_KMS("disable LVDS for eDP support\n");
> -			return;
> -		}
>  	}
>  
>  	pin = GMBUS_PIN_PANEL;

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux