On Thu, May 03, 2018 at 04:17:24PM +0300, Ville Syrjälä wrote:
> On Thu, May 03, 2018 at 06:07:45AM -0700, Rodrigo Vivi wrote:
> > On Wed, May 02, 2018 at 10:12:51PM +0300, Ville Syrjälä wrote:
> > > On Wed, May 02, 2018 at 10:52:55AM -0700, Rodrigo Vivi wrote:
> > > > On intel_dp_compute_config() we were calculating the needed vco
> > > > for eDP on gen9 and we stashing it in
> > > > intel_atomic_state.cdclk.logical.vco
> > > >
> > > > However few moments later on intel_modeset_checks() we fully
> > > > replace entire intel_atomic_state.cdclk.logical with
> > > > dev_priv->cdclk.logical fully overwriting the logical desired
> > > > vco for eDP on gen9.
> > > >
> > > > So, with wrong VCO value we end up with wrong desired cdclk, but
> > > > also it will raise a lot of WARNs: On gen9, when we read
> > > > CDCLK_CTL to verify if we configured properly the desired
> > > > frequency the CD Frequency Select bits [27:26] == 10b can mean
> > > > 337.5 or 308.57 MHz depending on the VCO. So if we have wrong
> > > > VCO value stashed we will believe the frequency selection didn't
> > > > stick and start to raise WARNs of cdclk mismatch.
> > > >
> > > > [ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
> > > > [ 42.897269] cdclk state doesn't match!
> > > > [ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
> > > > [ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915]
> > > > [ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
> > > > [ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
> > > > [ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO 8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
> > > >
> > > > v2: Move the entire eDP's vco logical adjustment to inside
> > > > the skl_modeset_calc_cdclk as suggested by Ville.
> > > >
> > > > Cc: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> > > > Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > > > ---
> > > > drivers/gpu/drm/i915/intel_cdclk.c | 41 ++++++++++++++++++++++++++++++++++----
> > > > drivers/gpu/drm/i915/intel_dp.c | 20 -------------------
> > > > 2 files changed, 37 insertions(+), 24 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
> > > > index 32d24c69da3c..704ddb4d3ca7 100644
> > > > --- a/drivers/gpu/drm/i915/intel_cdclk.c
> > > > +++ b/drivers/gpu/drm/i915/intel_cdclk.c
> > > > @@ -2302,9 +2302,44 @@ static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state)
> > > > return 0;
> > > > }
> > > >
> > > > +static int skl_dpll0_vco(struct intel_atomic_state *intel_state)
> > > > +{
> > > > + struct drm_i915_private *dev_priv = to_i915(intel_state->base.dev);
> > > > + struct intel_crtc *crtc;
> > > > + struct intel_crtc_state *crtc_state;
> > > > + int vco, i;
> > > > +
> > > > + vco = intel_state->cdclk.logical.vco;
> > > > + if (!vco)
> > > > + vco = dev_priv->skl_preferred_vco_freq;
> > > > +
> > > > + for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
> > > > + if (!crtc_state->base.enable)
> > > > + continue;
> > > > +
> > > > + if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
> > > > + continue;
> > > > +
> > > > + /*
> > > > + * DPLL0 VCO may need to be adjusted to get the correct
> > > > + * clock for eDP. This will affect cdclk as well.
> > > > + */
> > > > + switch (crtc_state->port_clock / 2) {
> > > > + case 108000:
> > > > + case 216000:
> > > > + vco = 8640000;
> > > > + break;
> > > > + default:
> > > > + vco = 8100000;
> > > > + break;
> > > > + }
> > > > + }
> > > > +
> > > > + return vco;
> > > > +}
> > >
> > > Yep. I think this should do the right thing. For the times when the pipe
> > > driving eDP isn't part of the atomic state we wil simply preserve the
> > > current vco setting. That means other pipes can't actually make a mess
> > > of the DPLL0 VCO while eDP depends on it.
> > >
> > > Reviewed-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> >
> > Thanks for the suggestions.
> >
> > So, on setting the examples of what *not* to do: I forgot to include
> > Fixes: and cc stable.
> >
> > Luckily I remembered before pushing. So,
> >
> > Fixes: bb0f4aab0e76 ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")
> > Cc: <stable@xxxxxxxxxxxxxxx> # v4.12+
> >
> > seems right for you?
>
> Yeah, that looks like the one to blame.
pushed, thanks
>
> >
> > >
> > > > +
> > > > static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
> > > > {
> > > > - struct drm_i915_private *dev_priv = to_i915(state->dev);
> > > > struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
> > > > int min_cdclk, cdclk, vco;
> > > >
> > > > @@ -2312,9 +2347,7 @@ static int skl_modeset_calc_cdclk(struct drm_atomic_state *state)
> > > > if (min_cdclk < 0)
> > > > return min_cdclk;
> > > >
> > > > - vco = intel_state->cdclk.logical.vco;
> > > > - if (!vco)
> > > > - vco = dev_priv->skl_preferred_vco_freq;
> > > > + vco = skl_dpll0_vco(intel_state);
> > > >
> > > > /*
> > > > * FIXME should also account for plane ratio
> > > > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > > > index 83da50b13d81..dde92e4af5d3 100644
> > > > --- a/drivers/gpu/drm/i915/intel_dp.c
> > > > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > > > @@ -1929,26 +1929,6 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> > > > reduce_m_n);
> > > > }
> > > >
> > > > - /*
> > > > - * DPLL0 VCO may need to be adjusted to get the correct
> > > > - * clock for eDP. This will affect cdclk as well.
> > > > - */
> > > > - if (intel_dp_is_edp(intel_dp) && IS_GEN9_BC(dev_priv)) {
> > > > - int vco;
> > > > -
> > > > - switch (pipe_config->port_clock / 2) {
> > > > - case 108000:
> > > > - case 216000:
> > > > - vco = 8640000;
> > > > - break;
> > > > - default:
> > > > - vco = 8100000;
> > > > - break;
> > > > - }
> > > > -
> > > > - to_intel_atomic_state(pipe_config->base.state)->cdclk.logical.vco = vco;
> > > > - }
> > > > -
> > > > if (!HAS_DDI(dev_priv))
> > > > intel_dp_set_clock(encoder, pipe_config);
> > > >
> > > > --
> > > > 2.13.6
> > >
> > > --
> > > Ville Syrjälä
> > > Intel
>
> --
> Ville Syrjälä
> Intel
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
