Sorry, I added a debug patch when submitting to trybot and forgot to
remove that from my local branch. I will resubmit to a new series.
Yunwei
On 4/23/2018 12:55 PM, Rodrigo Vivi wrote:
On Mon, Apr 23, 2018 at 09:12:46AM -0700, Yunwei Zhang wrote:
L3Bank could be fused off in hardware for debug purpose, and it
is possible that subslice is enabled while its corresponding L3Bank pairs
are disabled. In such case, if MCR packet control register(0xFDC) is
programed to point to a disabled bank pair, a MMIO read into L3Bank range
will return 0 instead of correct values.
However, this is not going to be the case in any production silicon.
Therefore, we only check at initialization and issue a warning should
this really happen.
References: HSDES#1405586840
v2:
- use fls instead of find_last_bit (Chris)
- use is_power_of_2() instead of counting bit set (Chris)
v3:
- rebase on latest tip
v5:
- Added references (Mika)
- Move local variable into scope where they are used (Ursulin)
- use a new local variable to reduce long line of code (Ursulin)
v6:
- Some coding style and use more local variables for clearer
logic (Ursulin)
v7:
- Rebased.
v8:
- Reviewed by Oscar.
v9:
- Fixed label location. (Oscar)
v10:
- Improved comments and replaced magical number. (Oscar)
Cc: Oscar Mateo <oscar.mateo@xxxxxxxxx>
Cc: Michel Thierry <michel.thierry@xxxxxxxxx>
Cc: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Cc: Mika Kuoppala <mika.kuoppala@xxxxxxxxxxxxxxx>
Cc: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
Signed-off-by: Yunwei Zhang <yunwei.zhang@xxxxxxxxx>
Reviewed-by: Oscar Mateo <oscar.mateo@xxxxxxxxx>
I confess that I got lost on this thread, so please
accept my apologies in advance if I'm missing something here.
But I don't know anymore:
- if this series has 2 or 3 patches.
- which of the patches rv-b by Oscar are still valid
- if they are passing cleaning on CI.
So, my suggestion is to start a new series from scratch.
(resend all without any in-reply-to)
But please double check with Oscar if his rv-b should stay
on the new series.
Thanks,
Rodrigo.
---
drivers/gpu/drm/i915/i915_reg.h | 4 ++++
drivers/gpu/drm/i915/intel_device_info.c | 34 ++++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index fb10602..6c9c01b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2709,6 +2709,10 @@ enum i915_power_well_id {
#define GEN10_F2_SS_DIS_SHIFT 18
#define GEN10_F2_SS_DIS_MASK (0xf << GEN10_F2_SS_DIS_SHIFT)
+#define GEN10_MIRROR_FUSE3 _MMIO(0x9118)
+#define GEN10_L3BANK_PAIR_COUNT 4
+#define GEN10_L3BANK_MASK 0x0F
+
#define GEN8_EU_DISABLE0 _MMIO(0x9134)
#define GEN8_EU_DIS0_S0_MASK 0xffffff
#define GEN8_EU_DIS0_S1_SHIFT 24
diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
index d917c9b..44ca90a 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -729,6 +729,40 @@ static void sanitize_mcr(struct intel_device_info *info)
u32 slice = fls(info->sseu.slice_mask);
u32 subslice = fls(info->sseu.subslice_mask[slice]);
+ /*
+ * WaProgramMgsrForL3BankSpecificMmioReads: cnl,icl
+ * L3Banks could be fused off in single slice scenario. If that is
+ * the case, we might need to program MCR select to a valid L3Bank
+ * by default, to make sure we correctly read certain registers
+ * later on (in the range 0xB100 - 0xB3FF).
+ * This might be incompatible with
+ * WaProgramMgsrForCorrectSliceSpecificMmioReads.
+ * Fortunately, this should not happen in production hardware, so
+ * we only assert that this is the case (instead of implementing
+ * something more complex that requires checking the range of every
+ * MMIO read).
+ */
+ if (INTEL_GEN(dev_priv) >= 10 &&
+ is_power_of_2(info->sseu.slice_mask)) {
+ /*
+ * read FUSE3 for enabled L3 Bank IDs, if L3 Bank matches
+ * enabled subslice, no need to redirect MCR packet
+ */
+ u32 fuse3 = I915_READ(GEN10_MIRROR_FUSE3);
+ u8 ss_mask = info->sseu.subslice_mask[slice];
+
+ u8 enabled_mask = (ss_mask | ss_mask >>
+ GEN10_L3BANK_PAIR_COUNT) &
+ GEN10_L3BANK_MASK;
+ u8 disabled_mask = fuse3 & GEN10_L3BANK_MASK;
+
+ /*
+ * Production silicon should have matched L3Bank and
+ * subslice enabled
+ */
+ WARN_ON((enabled_mask & disabled_mask) != enabled_mask);
+ }
+
if (INTEL_GEN(dev_priv) >= 11) {
mcr_slice_subslice_mask = GEN11_MCR_SLICE_MASK |
GEN11_MCR_SUBSLICE_MASK;
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
