On Thu, Apr 19, 2018 at 03:43:19PM +0200, Hans de Goede wrote:
> Hi,
>
> On 05-04-18 15:26, Daniel Vetter wrote:
> > On Thu, Apr 5, 2018 at 1:47 PM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> > > Hi,
> > >
> > >
> > > On 05-04-18 09:14, Daniel Vetter wrote:
> > > >
> > > > On Fri, Mar 30, 2018 at 02:27:15PM +0200, Hans de Goede wrote:
> > > > >
> > > > > Before this commit the WaSkipStolenMemoryFirstPage workaround code was
> > > > > skipping the first 4k by passing 4096 as start of the address range
> > > > > passed
> > > > > to drm_mm_init(). This means that calling drm_mm_reserve_node() to try
> > > > > and
> > > > > reserve the firmware framebuffer so that we can inherit it would always
> > > > > fail, as the firmware framebuffer starts at address 0.
> > > > >
> > > > > Commit d43537610470 ("drm/i915: skip the first 4k of stolen memory on
> > > > > everything >= gen8") says in its commit message: "This is confirmed to
> > > > > fix
> > > > > Skylake screen flickering issues (probably caused by the fact that we
> > > > > initialized a ring in the first page of stolen, but I didn't 100% confirm
> > > > > this theory)."
> > > > >
> > > > > Which suggests that it is safe to use the first page for a linear
> > > > > framebuffer as the firmware is doing.
> > > > >
> > > > > This commit always passes 0 as start to drm_mm_init() and works around
> > > > > WaSkipStolenMemoryFirstPage in i915_gem_stolen_insert_node_in_range()
> > > > > by insuring the start address passed by to drm_mm_insert_node_in_range()
> > > > > is always 4k or more. All entry points to i915_gem_stolen.c go through
> > > > > i915_gem_stolen_insert_node_in_range(), so that any newly allocated
> > > > > objects such as ring-buffers will not be allocated in the first 4k.
> > > > >
> > > > > The one exception is i915_gem_object_create_stolen_for_preallocated()
> > > > > which directly calls drm_mm_reserve_node() which now will be able to
> > > > > use the first 4k.
> > > > >
> > > > > This fixes the i915 driver no longer being able to inherit the firmware
> > > > > framebuffer on gen8+, which fixes the video output changing from the
> > > > > vendor logo to a black screen as soon as the i915 driver is loaded
> > > > > (on systems without fbcon).
> > > > >
> > > > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> > > >
> > > >
> > > > I think this is worth a shot. The only explanation I can think of why the
> > > > GOP could get away with this and still follow the w/a is if it doesn't
> > > > have a 1:1 mapping between GGTT and stolen.
> > >
> > >
> > > My guess is that the GOP does not care about the w/a because the w/a
> > > states that the command-streamers sometimes do a spurious flush (write)
> > > to the first page, and the command-streamers are not used until much
> > > later, so the GOP is probably ignoring the w/a all together.
> > >
> > > At least that is my theory.
> >
> > Atm we do not know whether the GOP actually implements the wa or not.
> > That it doesn't care is just a conjecture, but we have no proof. On
> > previous platforms the 1:1 mapping did hold, but there's no
> > fundamental reason why it sitll does.
>
> Right.
>
> > > > Atm we hardcode that
> > > > assumption in intel_alloc_initial_plane_obj by passing the base_aligned as
> > > > both the stolen_offset and the gtt_offset (but it's only the gtt_offset
> > > > really). And since we're not re-writing the ptes it's not noticeable.
> > > >
> > > > I think to decide whether this is the right approach we should
> > > > double-check whether that 1:1 assumption really holds true: Either read
> > > > back the ggtt ptes and check their addresses (but iirc on some platforms
> > > > their write-only, readback doesn't work), or we also rewrite the ptes
> > > > again for preallocated stuff, like when binding a normal object into the
> > > > gtt. If either of these approaches confirms that those affected gen8+
> > > > machines still use the 1:1 mapping, then I'm happy to put my r-b on this
> > > > patch. If not, well then we at least know what to fix: We need to read out
> > > > the real stolen_offset, instead of making assumptions.
> > >
> > >
> > > I'm happy to give this a try on one or more affected machines, I can e.g.
> > > try this on both a skylake desktop and a cherry-trail based tablet.
> > >
> > > But I'm clueless about the whole PTE stuff, so I'm going to need someone
> > > to provide me with a patch following either approach. If readback of the
> > > PTEs works on skylake / cherrytrail I guess that would be the best way.
> > >
> > > Note to test this I'm currently booting the kernel with the machine's
> > > UEFI vendor logo still being displayed when efifb kicks in. I've added:
> > > "fbcon=vc:2-62" to the kernel commandline to make fbcon not bind to
> > > VC0 / VC1, so that the framebuffer contents stays intact, combined with
> > > the patch we are discussing now, this makes the vendor logo stay on
> > > the screen all the way till GDM loads, which looks rather nice actually :)
> > >
> > > And on shutdown we fall back to the original framebuffer and the vendor
> > > logo is back again. I cannot see any corruption in the display at either
> > > boot or shutdown time.
> >
> > It shouldn't matter whether efifb takes over or not, it's still the
> > GOP's framebuffer we're taking over. Different content for sure, logo
> > is gone, but we only care about which pages we're using.
> >
> > Wrt the code:
> > - (Re)binding happens by calling i915_vma_bind, if you put a call to
> > that at the end of the stolen_preallocated functions you should get
> > that. Ofc needs the logo still there so you can see it jump/get
> > mangled.
> > - GGTT PTEs for gen8+ are written through e.g. gen8_ggttt_insert_page
> > or gen8_ggtt_insert_entries (which takes the vma). Since we only care
> > about the first entry a readq(dev_priv->ggtt->gsm) is all we really
> > need. If it's all 0 then it's not working (since at least
> > _PAGE_PRESENT should be set, plus the physical address of a page in
> > stolen memory).
> >
> > I can do some patches for each of those, but a bit swamped. Also no
> > gen8 handy for testing I think to make sure it works, so would take a
> > few weeks probably.
>
> I was a bit swamped with other stuff myself too, but I'm back to working
> on this now. Below is the debug patch I came up with based on what you
> wrote above.
>
> This results in the following debug output:
>
> [ 1.651141] first ggtt entry before bind: 0x0000000078c00001
> [ 1.651151] i915_vma_bind ret 0
> [ 1.651152] first ggtt entry after bind: 0x0000000078c00083
>
> And "sudo cat /proc/iomem | grep Stolen" gives:
> 78c00000-88bfffff : Graphics Stolen Memory
>
> I see no visual changes with this patch (BIOS vendor logo still
> stays in place when using fbcon=vc:2-62 to make fbcon not bind
> on boot and keep the vendor logo intact).
>
> The address of the first ggtt entry matches with the start of stolen
> and the i915_vma_bind call only changes the first gtt entry's flags,
> or-ing in _PAGE_RW (BIT(1)) and PPAT_CACHED (BIT(7)), which perfectly
> matches what we would expect based on gen8_pte_encode()'s behavior.
>
> So it seems that the GOP indeed does NOT implement the wa and the i915's
> code assuming a linear mapping at the start of stolen for the BIOS fb
> still holds true.
>
> The debug output is from my Skylake based machine which uses an
> Asrock B150M Pro4S/D3 mainboard.
>
> I've also tested this on a Cherry Trail based device (a GPD Win)
> with identical results (the flags are 0x1b after the vma_bind
> on CHT, which matches with I915_CACHE_NONE).
tbh, not what I expected, so good we've done the experiment to confirm :-)
With the above information added to the commit message (you can just paste
your entire message, including test diff to the commit message) the
original patch has my:
Reviewed-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
Thanks for doing all the digging here.
Cheers, Daniel
>
> Regards,
>
> Hans
>
>
> From 400f2b0d722236999a5706a1f2fa0bb70bf9c73f Mon Sep 17 00:00:00 2001
> From: Hans de Goede <hdegoede@xxxxxxxxxx>
> Date: Thu, 19 Apr 2018 14:44:43 +0200
> Subject: [PATCH resend] i915: i915_vma_bind for pre-allocated stolen test /
> debug
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> drivers/gpu/drm/i915/i915_gem_stolen.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c b/drivers/gpu/drm/i915/i915_gem_stolen.c
> index 152487d91197..7db03f7d2c51 100644
> --- a/drivers/gpu/drm/i915/i915_gem_stolen.c
> +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
> @@ -648,6 +648,13 @@ i915_gem_object_create_stolen_for_preallocated(struct drm_i915_private *dev_priv
> obj->bind_count++;
> spin_unlock(&dev_priv->mm.obj_lock);
>
> + pr_err("first ggtt entry before bind: 0x%016llx\n", readq(dev_priv->ggtt.gsm));
> + ret = i915_vma_bind(vma,
> + HAS_LLC(dev_priv) ? I915_CACHE_LLC : I915_CACHE_NONE,
> + PIN_UPDATE);
> + pr_err("i915_vma_bind ret %d\n", ret);
> + pr_err("first ggtt entry after bind: 0x%016llx\n", readq(dev_priv->ggtt.gsm));
> +
> return obj;
>
> err_pages:
> --
> 2.17.0
>
>
>
> >
> > Cheers, Daniel
> > >
> > >
> > > >
> > > > Cheers, Daniel
> > > > >
> > > > > ---
> > > > > drivers/gpu/drm/i915/i915_gem_stolen.c | 15 ++++++---------
> > > > > 1 file changed, 6 insertions(+), 9 deletions(-)
> > > > >
> > > > > diff --git a/drivers/gpu/drm/i915/i915_gem_stolen.c
> > > > > b/drivers/gpu/drm/i915/i915_gem_stolen.c
> > > > > index af915d041281..ad949cc30928 100644
> > > > > --- a/drivers/gpu/drm/i915/i915_gem_stolen.c
> > > > > +++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
> > > > > @@ -51,6 +51,10 @@ int i915_gem_stolen_insert_node_in_range(struct
> > > > > drm_i915_private *dev_priv,
> > > > > if (!drm_mm_initialized(&dev_priv->mm.stolen))
> > > > > return -ENODEV;
> > > > > + /* WaSkipStolenMemoryFirstPage:bdw+ */
> > > > > + if (INTEL_GEN(dev_priv) >= 8 && start < 4096)
> > > > > + start = 4096;
> > > > > +
> > > > > mutex_lock(&dev_priv->mm.stolen_lock);
> > > > > ret = drm_mm_insert_node_in_range(&dev_priv->mm.stolen, node,
> > > > > size, alignment, 0,
> > > > > @@ -343,7 +347,6 @@ int i915_gem_init_stolen(struct drm_i915_private
> > > > > *dev_priv)
> > > > > {
> > > > > resource_size_t reserved_base, stolen_top;
> > > > > resource_size_t reserved_total, reserved_size;
> > > > > - resource_size_t stolen_usable_start;
> > > > > mutex_init(&dev_priv->mm.stolen_lock);
> > > > > @@ -435,17 +438,11 @@ int i915_gem_init_stolen(struct drm_i915_private
> > > > > *dev_priv)
> > > > > (u64)resource_size(&dev_priv->dsm) >> 10,
> > > > > ((u64)resource_size(&dev_priv->dsm) -
> > > > > reserved_total) >> 10);
> > > > > - stolen_usable_start = 0;
> > > > > - /* WaSkipStolenMemoryFirstPage:bdw+ */
> > > > > - if (INTEL_GEN(dev_priv) >= 8)
> > > > > - stolen_usable_start = 4096;
> > > > > -
> > > > > dev_priv->stolen_usable_size =
> > > > > - resource_size(&dev_priv->dsm) - reserved_total -
> > > > > stolen_usable_start;
> > > > > + resource_size(&dev_priv->dsm) - reserved_total;
> > > > > /* Basic memrange allocator for stolen space. */
> > > > > - drm_mm_init(&dev_priv->mm.stolen, stolen_usable_start,
> > > > > - dev_priv->stolen_usable_size);
> > > > > + drm_mm_init(&dev_priv->mm.stolen, 0,
> > > > > dev_priv->stolen_usable_size);
> > > > > return 0;
> > > > > }
> > > > > --
> > > > > 2.17.0.rc2
> > > > >
> > > > > _______________________________________________
> > > > > Intel-gfx mailing list
> > > > > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > > > > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> > > >
> > > >
> > >
> >
> >
> >
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
