Re: [PATCH v3 2/4] drm/i915: Always set HUC_LOADING_AGENT_GUC bit in WOPCM offset register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 10 Apr 2018 02:42:18 +0200, Jackie Li <yaodong.li@xxxxxxxxx> wrote:

The enable_guc modparam is used to enable/disable GuC/HuC FW uploading
dynamcially during i915 module loading. If WOPCM offset register was
  ^^^^
typo

locked
without having HUC_LOADING_AGENT_GUC bit set to 1, the module reloading
with both GuC and HuC FW will fail since we need to set this bit to 1 for
HuC FW uploading.

Since HUC_LOADING_AGENT_GUC bit has no impact on GuC FW uploading, this
patch updates the register updating code to make sure the WOPCM offset
register is always locked with HUC_LOADING_AGENT_GUC bit set to 1 which
will guarantee successful uploading of both GuC and HuC FW. We will further
take care of the locked values in the following enhancement patch.

Signed-off-by: Jackie Li <yaodong.li@xxxxxxxxx>
Cc: Michal Wajdeczko <michal.wajdeczko@xxxxxxxxx>
Cc: Sagar Arun Kamble <sagar.a.kamble@xxxxxxxxx>
Cc: Michal Winiarski <michal.winiarski@xxxxxxxxx>
Cc: John Spotswood <john.a.spotswood@xxxxxxxxx>
Cc: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
---
 drivers/gpu/drm/i915/intel_wopcm.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_wopcm.c b/drivers/gpu/drm/i915/intel_wopcm.c
index 74bf76f..b1c08ca 100644
--- a/drivers/gpu/drm/i915/intel_wopcm.c
+++ b/drivers/gpu/drm/i915/intel_wopcm.c
@@ -238,8 +238,6 @@ static inline int write_and_verify(struct drm_i915_private *dev_priv,
 int intel_wopcm_init_hw(struct intel_wopcm *wopcm)
 {
 	struct drm_i915_private *dev_priv = wopcm_to_i915(wopcm);
-	u32 huc_agent;
-	u32 mask;
 	int err;
	if (!USES_GUC(dev_priv))
@@ -255,10 +253,10 @@ int intel_wopcm_init_hw(struct intel_wopcm *wopcm)
 	if (err)
 		goto err_out;
-	huc_agent = USES_HUC(dev_priv) ? HUC_LOADING_AGENT_GUC : 0;
-	mask = GUC_WOPCM_OFFSET_MASK | GUC_WOPCM_OFFSET_VALID | huc_agent;
 	err = write_and_verify(dev_priv, DMA_GUC_WOPCM_OFFSET,
-			       wopcm->guc.base | huc_agent, mask,
+			       wopcm->guc.base | HUC_LOADING_AGENT_GUC,
+			       GUC_WOPCM_OFFSET_MASK | HUC_LOADING_AGENT_GUC |
+			       GUC_WOPCM_OFFSET_VALID,

while we can unconditionally set HUC_AGENT bit, there is no need to verify
it unless we are using HuC, so we can consider leaving old mask intact.

/m

 			       GUC_WOPCM_OFFSET_VALID);
 	if (err)
 		goto err_out;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux