Re: [PATCH 2/2] drm/i915/psr/cnl: Set y-coordinate as valid in SDP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2018-03-30 at 14:15 -0700, José Roberto de Souza wrote:
> This was my bad, spec says that the name of this bit is
> 'Y-coordinate valid' but the values for it is:
> 0: Include Y-coordinate valid eDP1.4a
> 1: Do not include Y-coordinate valid eDP 1.4
> So renaming the bit and not setting it.
> 
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx>
> Signed-off-by: José Roberto de Souza <jose.souza@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h  | 2 +-
>  drivers/gpu/drm/i915/intel_psr.c | 5 ++---
>  2 files changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 176dca6554f4..19429cb1f3a7 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4058,7 +4058,7 @@ enum {
>  #define EDP_PSR2_CTL			_MMIO(0x6f900)
>  #define   EDP_PSR2_ENABLE		(1<<31)
>  #define   EDP_SU_TRACK_ENABLE		(1<<30)
> -#define   EDP_Y_COORDINATE_VALID	(1<<26) /* GLK and CNL+ */
> +#define   EDP_Y_COORDINATE_INVALID	(1<<26) /* GLK and CNL+ */

INVALID isn't the same as asking the source to not send the y-coordinate
valid bit. Sorry to be pedantic, please leave the definition as it is.

Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@xxxxxxxxx> if you
remove this hunk.

>  #define   EDP_Y_COORDINATE_ENABLE	(1<<25) /* GLK and CNL+ */
>  #define   EDP_MAX_SU_DISABLE_TIME(t)	((t)<<20)
>  #define   EDP_MAX_SU_DISABLE_TIME_MASK	(0x1f<<20)
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index 2d53f7398a6d..f12111438bcf 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -400,9 +400,8 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
>  	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
>  	 * good enough. */
>  	val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
> -	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
> -		val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
> -	}
> +	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
> +		val |= EDP_Y_COORDINATE_ENABLE;
>  
>  	val |= EDP_PSR2_FRAME_BEFORE_SU(dev_priv->psr.sink_sync_latency + 1);
>  
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux