Re: [PATCH v2] drm/i915: Actually flush interrupts on reset not just wedging

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Chris Wilson <chris@xxxxxxxxxxxxxxxxxx> writes:

> Commit 0f36a85c3bd5 ("drm/i915: Flush pending interrupt following a GPU
> reset") got confused and only applied the flush to the set-wedge path
> (which itself is proving troublesome), but we also need the
> serialisation on the regular reset path. Oops.
>
> Move the interrupt into reset_irq() and make it common to the reset and
> final set-wedge.
>
> v2: reset_irq() after port cancellation, as we assert that
> execlists->active is sane for cancellation (and is being reset by
> reset_irq).
>
> References: 0f36a85c3bd5 ("drm/i915: Flush pending interrupt following a GPU reset")
> Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
> Cc: Mika Kuoppala <mika.kuoppala@xxxxxxxxxxxxxxx>
> Cc: Michel Thierry <michel.thierry@xxxxxxxxx>
> Cc: Michał Winiarski <michal.winiarski@xxxxxxxxx>
> Cc: Jeff McGee <jeff.mcgee@xxxxxxxxx>

Reviewed-by: Mika Kuoppala <mika.kuoppala@xxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/i915/intel_lrc.c | 107 +++++++++++++++++++--------------------
>  1 file changed, 53 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
> index ce09c5ad334f..b4ab06b05e58 100644
> --- a/drivers/gpu/drm/i915/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/intel_lrc.c
> @@ -740,6 +740,57 @@ execlists_cancel_port_requests(struct intel_engine_execlists * const execlists)
>  	}
>  }
>  
> +static void clear_gtiir(struct intel_engine_cs *engine)
> +{
> +	static const u8 gtiir[] = {
> +		[RCS]  = 0,
> +		[BCS]  = 0,
> +		[VCS]  = 1,
> +		[VCS2] = 1,
> +		[VECS] = 3,
> +	};
> +	struct drm_i915_private *dev_priv = engine->i915;
> +	int i;
> +
> +	/* TODO: correctly reset irqs for gen11 */
> +	if (WARN_ON_ONCE(INTEL_GEN(engine->i915) >= 11))
> +		return;
> +
> +	GEM_BUG_ON(engine->id >= ARRAY_SIZE(gtiir));
> +
> +	/*
> +	 * Clear any pending interrupt state.
> +	 *
> +	 * We do it twice out of paranoia that some of the IIR are
> +	 * double buffered, and so if we only reset it once there may
> +	 * still be an interrupt pending.
> +	 */
> +	for (i = 0; i < 2; i++) {
> +		I915_WRITE(GEN8_GT_IIR(gtiir[engine->id]),
> +			   engine->irq_keep_mask);
> +		POSTING_READ(GEN8_GT_IIR(gtiir[engine->id]));
> +	}
> +	GEM_BUG_ON(I915_READ(GEN8_GT_IIR(gtiir[engine->id])) &
> +		   engine->irq_keep_mask);
> +}
> +
> +static void reset_irq(struct intel_engine_cs *engine)
> +{
> +	/* Mark all CS interrupts as complete */
> +	smp_store_mb(engine->execlists.active, 0);
> +	synchronize_hardirq(engine->i915->drm.irq);
> +
> +	clear_gtiir(engine);
> +
> +	/*
> +	 * The port is checked prior to scheduling a tasklet, but
> +	 * just in case we have suspended the tasklet to do the
> +	 * wedging make sure that when it wakes, it decides there
> +	 * is no work to do by clearing the irq_posted bit.
> +	 */
> +	clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted);
> +}
> +
>  static void execlists_cancel_requests(struct intel_engine_cs *engine)
>  {
>  	struct intel_engine_execlists * const execlists = &engine->execlists;
> @@ -767,6 +818,7 @@ static void execlists_cancel_requests(struct intel_engine_cs *engine)
>  
>  	/* Cancel the requests on the HW and clear the ELSP tracker. */
>  	execlists_cancel_port_requests(execlists);
> +	reset_irq(engine);
>  
>  	spin_lock(&engine->timeline->lock);
>  
> @@ -805,18 +857,6 @@ static void execlists_cancel_requests(struct intel_engine_cs *engine)
>  
>  	spin_unlock(&engine->timeline->lock);
>  
> -	/* Mark all CS interrupts as complete */
> -	smp_store_mb(execlists->active, 0);
> -	synchronize_hardirq(engine->i915->drm.irq);
> -
> -	/*
> -	 * The port is checked prior to scheduling a tasklet, but
> -	 * just in case we have suspended the tasklet to do the
> -	 * wedging make sure that when it wakes, it decides there
> -	 * is no work to do by clearing the irq_posted bit.
> -	 */
> -	clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted);
> -
>  	local_irq_restore(flags);
>  }
>  
> @@ -1566,14 +1606,6 @@ static int intel_init_workaround_bb(struct intel_engine_cs *engine)
>  	return ret;
>  }
>  
> -static u8 gtiir[] = {
> -	[RCS] = 0,
> -	[BCS] = 0,
> -	[VCS] = 1,
> -	[VCS2] = 1,
> -	[VECS] = 3,
> -};
> -
>  static void enable_execlists(struct intel_engine_cs *engine)
>  {
>  	struct drm_i915_private *dev_priv = engine->i915;
> @@ -1657,35 +1689,6 @@ static int gen9_init_render_ring(struct intel_engine_cs *engine)
>  	return init_workarounds_ring(engine);
>  }
>  
> -static void reset_irq(struct intel_engine_cs *engine)
> -{
> -	struct drm_i915_private *dev_priv = engine->i915;
> -	int i;
> -
> -	/* TODO: correctly reset irqs for gen11 */
> -	if (WARN_ON_ONCE(INTEL_GEN(engine->i915) >= 11))
> -		return;
> -
> -	GEM_BUG_ON(engine->id >= ARRAY_SIZE(gtiir));
> -
> -	/*
> -	 * Clear any pending interrupt state.
> -	 *
> -	 * We do it twice out of paranoia that some of the IIR are double
> -	 * buffered, and if we only reset it once there may still be
> -	 * an interrupt pending.
> -	 */
> -	for (i = 0; i < 2; i++) {
> -		I915_WRITE(GEN8_GT_IIR(gtiir[engine->id]),
> -			   engine->irq_keep_mask);
> -		POSTING_READ(GEN8_GT_IIR(gtiir[engine->id]));
> -	}
> -	GEM_BUG_ON(I915_READ(GEN8_GT_IIR(gtiir[engine->id])) &
> -		   engine->irq_keep_mask);
> -
> -	clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted);
> -}
> -
>  static void reset_common_ring(struct intel_engine_cs *engine,
>  			      struct i915_request *request)
>  {
> @@ -1699,8 +1702,6 @@ static void reset_common_ring(struct intel_engine_cs *engine,
>  	/* See execlists_cancel_requests() for the irq/spinlock split. */
>  	local_irq_save(flags);
>  
> -	reset_irq(engine);
> -
>  	/*
>  	 * Catch up with any missed context-switch interrupts.
>  	 *
> @@ -1711,15 +1712,13 @@ static void reset_common_ring(struct intel_engine_cs *engine,
>  	 * requests were completed.
>  	 */
>  	execlists_cancel_port_requests(execlists);
> +	reset_irq(engine);
>  
>  	/* Push back any incomplete requests for replay after the reset. */
>  	spin_lock(&engine->timeline->lock);
>  	__unwind_incomplete_requests(engine);
>  	spin_unlock(&engine->timeline->lock);
>  
> -	/* Mark all CS interrupts as complete */
> -	execlists->active = 0;
> -
>  	local_irq_restore(flags);
>  
>  	/*
> -- 
> 2.16.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux