From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
When doing forced load detection testing we should totally ignore any
hotplug status for the connector. This is mostly relevant for machines
where we already ignore the hotplug status based on the DMI quirks. On
other machines we would currently skip the force load detection tests
on account of the connector already being connected.
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_crt.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index c0a8805b277f..ee2324bba82e 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -748,6 +748,11 @@ intel_crt_detect(struct drm_connector *connector,
connector->base.id, connector->name,
force);
+ if (i915_modparams.load_detect_test) {
+ intel_display_power_get(dev_priv, intel_encoder->power_domain);
+ goto load_detect;
+ }
+
/* Skip machines without VGA that falsely report hotplug events */
if (dmi_check_system(intel_spurious_crt_detect))
return connector_status_disconnected;
@@ -781,6 +786,7 @@ intel_crt_detect(struct drm_connector *connector,
goto out;
}
+load_detect:
if (!force) {
status = connector->status;
goto out;
--
2.16.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
