Re: [PATCH 10/14] drm/i915: Parametrize TRANS_DP_PORT_SEL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 02 Mar 2018, Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Parametrize the TRANS_DP_PORT_SEL macros.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/i915_reg.h      |  8 +++-----
>  drivers/gpu/drm/i915/intel_display.c | 23 +++++++----------------
>  2 files changed, 10 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index d7dc03bd0b4f..f1460fd27881 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -7914,11 +7914,9 @@ enum {
>  #define _TRANS_DP_CTL_C		0xe2300
>  #define TRANS_DP_CTL(pipe)	_MMIO_PIPE(pipe, _TRANS_DP_CTL_A, _TRANS_DP_CTL_B)
>  #define  TRANS_DP_OUTPUT_ENABLE	(1<<31)
> -#define  TRANS_DP_PORT_SEL_B	(0<<29)
> -#define  TRANS_DP_PORT_SEL_C	(1<<29)
> -#define  TRANS_DP_PORT_SEL_D	(2<<29)
> -#define  TRANS_DP_PORT_SEL_NONE	(3<<29)
> -#define  TRANS_DP_PORT_SEL_MASK	(3<<29)
> +#define  TRANS_DP_PORT_SEL(port)	(((port) - PORT_B) << 29)
> +#define  TRANS_DP_PORT_SEL_NONE		(3 << 29)
> +#define  TRANS_DP_PORT_SEL_MASK		(3 << 29)
>  #define  TRANS_DP_PIPE_TO_PORT(val)	((((val) & TRANS_DP_PORT_SEL_MASK) >> 29) + PORT_B)
>  #define  TRANS_DP_AUDIO_ONLY	(1<<26)
>  #define  TRANS_DP_ENH_FRAMING	(1<<18)
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 239059493243..e8bedf09d892 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1318,9 +1318,9 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
>  {
>  	enum pipe port_pipe;
>  
> -	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
> -	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
> -	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
> +	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL(PORT_B));
> +	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL(PORT_C));
> +	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL(PORT_D));
>  
>  	I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) &&
>  			port_pipe == pipe,
> @@ -4603,6 +4603,8 @@ static void ironlake_pch_enable(const struct intel_crtc_state *crtc_state)
>  			&crtc_state->base.adjusted_mode;
>  		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
>  		i915_reg_t reg = TRANS_DP_CTL(pipe);
> +		enum port port;
> +
>  		temp = I915_READ(reg);
>  		temp &= ~(TRANS_DP_PORT_SEL_MASK |
>  			  TRANS_DP_SYNC_MASK |
> @@ -4615,19 +4617,8 @@ static void ironlake_pch_enable(const struct intel_crtc_state *crtc_state)
>  		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
>  			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
>  
> -		switch (intel_trans_dp_port_sel(crtc)) {
> -		case PORT_B:
> -			temp |= TRANS_DP_PORT_SEL_B;
> -			break;
> -		case PORT_C:
> -			temp |= TRANS_DP_PORT_SEL_C;
> -			break;
> -		case PORT_D:
> -			temp |= TRANS_DP_PORT_SEL_D;
> -			break;
> -		default:
> -			BUG();
> -		}
> +		port = intel_trans_dp_port_sel(crtc);

I'd be happier to retain something like this here:

	WARN_ON(port < PORT_B || port > PORT_D);

With that,

Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>

> +		temp |= TRANS_DP_PORT_SEL(port);
>  
>  		I915_WRITE(reg, temp);
>  	}

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx




[Index of Archives]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]
  Powered by Linux