From: Chandra Konduru <chandra.konduru@xxxxxxxxx>
This patch sets appropriate scaler mode for NV12 format.
In this mode, skylake scaler does either chroma-upsampling or
chroma-upsampling and resolution scaling
v2: Review comments from Ville addressed
NV12 case to be checked first for setting
the scaler
v3: Rebased (me)
v4: Rebased (me)
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v6: Rebased (me)
v7: Rebased (me)
v8: Rebased (me)
Restricting the NV12 change for scaler to BXT and KBL
in this series.
v9: Rebased (me)
v10: As of now, NV12 has been tested on Gen9 and Gen10. However,
code is applicable to all GEN >= 9. Hence making
that change to keep it generic.
Comments under v8 is not valid anymore.
v11: Addressed review comments by Shashank Sharma.
For Gen10+, the scaler mode to be set it planar or normal
(single bit). Changed the code to be applicable to all
Gen.
v12: Addressed review comments from Shashank Sharma
For Gen9 (apart from GLK) bits 28:29 to be programmed
in PS_CTRL for NV12. For GLK and Gen10+, bit 29 to be set
for all Planar.
v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
Adding Reviewed by tag from Shashank Shamr
Tested-by: Clinton Taylor <clinton.a.taylor@xxxxxxxxx>
Reviewed-by: Shashank Sharma <shashank.sharma@xxxxxxxxx>
Reviewed-by: Clinton Taylor <clinton.a.taylor@xxxxxxxxx>
Signed-off-by: Chandra Konduru <chandra.konduru@xxxxxxxxx>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@xxxxxxxxx>
Signed-off-by: Vidya Srinivas <vidya.srinivas@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_reg.h | 2 ++
drivers/gpu/drm/i915/intel_atomic.c | 14 ++++++++++++--
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 258e86e..8e61b68 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6764,6 +6764,8 @@ enum {
#define PS_SCALER_MODE_MASK (3 << 28)
#define PS_SCALER_MODE_DYN (0 << 28)
#define PS_SCALER_MODE_HQ (1 << 28)
+#define SKL_PS_SCALER_MODE_NV12 (2 << 28)
+#define PS_SCALER_MODE_PLANAR (1 << 29)
#define PS_PLANE_SEL_MASK (7 << 25)
#define PS_PLANE_SEL(plane) (((plane) + 1) << 25)
#define PS_FILTER_MASK (3 << 23)
diff --git a/drivers/gpu/drm/i915/intel_atomic.c b/drivers/gpu/drm/i915/intel_atomic.c
index e9fb6920..bb8c168 100644
--- a/drivers/gpu/drm/i915/intel_atomic.c
+++ b/drivers/gpu/drm/i915/intel_atomic.c
@@ -328,8 +328,18 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
}
/* set scaler mode */
- if (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) {
- scaler_state->scalers[*scaler_id].mode = 0;
+ if ((INTEL_GEN(dev_priv) >= 9) &&
+ plane_state && plane_state->base.fb &&
+ plane_state->base.fb->format->format ==
+ DRM_FORMAT_NV12) {
+ if (INTEL_GEN(dev_priv) == 9 &&
+ !IS_GEMINILAKE(dev_priv) &&
+ !IS_SKYLAKE(dev_priv))
+ scaler_state->scalers[*scaler_id].mode =
+ SKL_PS_SCALER_MODE_NV12;
+ else
+ scaler_state->scalers[*scaler_id].mode =
+ PS_SCALER_MODE_PLANAR;
} else if (num_scalers_need == 1 && intel_crtc->pipe != PIPE_C) {
/*
* when only 1 scaler is in use on either pipe A or B,
--
2.7.4
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
